Tender For Comprehensive Maintenance Of B/R & E/M Works In Certain Buildings In Tv Area & Canabera Line Area Including Internal Electrical Wiring Of Various Capacities And Dbs,Mcbs And Connected Items At Af Stn Bareilly
Tender Value
70.97 Lakhs
Estimated cost
Bid Submission
25 Aug 2026
15 days left
EMD
1.31 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Of B/R & E/M Works In Certain Buildings In Tv Area & Canabera Line Area Including Internal Electrical Wiring Of Various Capacities And Dbs,Mcbs And Connected Items At Af Stn Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick tiles of any thickness or description complete all as specified and directed. |
| 2 | Demolition of Mud in roof any thick including plastering & leeping complete all as specified and directed. |
| 3 | M&L for providing PCC 1:3:6 type-C1, (using 20mm graded stone aggregate) padding over slab as leveling course complete all as specified and directed. |
| 4 | M & L for applying Smart Care Damp Proof with following application process: -(a) Prepare the surface by cleaning with high pressure water jet / wire brushes to ensure that it is free of dust, oil, grease, grime and loose particles.(b) Damaged portion if any to be repaired before application of roof treatment as per manufacturer's instruction (c) Supplying and applying a fiber reinforced elastomeric liquid applied waterproofing membrane. It is formulated with PU hybrid polymers and reinforcing acrylic fibers having sun reflective index SRI of 105 form of thick, seamless,durable membrane thus offering ultimate waterproofing in 2 or 3 coats, one coat of epoxy primer and 2-3 coats of undiluted of SmartCare Damp Proof Ultra @1.5kg/sqm. A geotextile of 45 GSM is to be inserted between the coats. applied by roller/ brush, SmartCare Damp Proof Ultra membrane with an elongation of 350% and tensile strength of 2.9 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, no leakage upto 10 bars of water pressure as per DIN 1048. Provides surface temperature reduction up to 10°C. The system includes final base preparation, complete as per Manufacturer's specifications.NOTE: - WORK SHALL BE CARRIED OUT BY THE AUTHORISED APPLICATORS OF THE MANUFACTURER IN CLOSE SUPERVISION OF EXECUTIVE STAFF UPTO ENGINEER-IN-CHARGE LEVEL. |
| 5 | Demolition of cement concrete of any description and in any position as in floors/sunken floors complete all as specified and disposing of debries outside MD land complete all as specified and as directed. |
| 6 | M&L for plain cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate as in filling of sunken floors complete all as specified and as directed. |
| 7 | M&L for average 15mm thick plaster in CM 1:4 mixed with water proofing compound when concrete is still greenfor water proofing treatment on approachable roof/sunken floor complete all as specified and directed. |
| 8 | M&L for roof/sunken floor APP based polymeric membrane minimum wt 3kg/sqm and mim 2mm thick reinforced with polyester non wove fabric (wt not less than 150gms/sqm ) and application of two coats of water based bitumen primer @ 1ltr/sqm(.5ltr in each coat) by brush . After primer, the entire roof surface shall be painted with hot, blown bitumen grade 85/25 confirming to IS-702 @ 1.2 Kg/Sqm .APP laid on hot, blown bitumen by forced torch application with 100mm side lap/end lap on prepared surfaces as per manufacture’s instruction and strict supervision of manufacture’s technical representative complete all as specified and directed. |
| 9 | M&L cutting out crack in V section in existing roof ,chajjas or similar work up to 40 mm deep and cleaning the same with water jets to get rid of any loose material and wetting ,grouting with cement & sand mortar 1:3 mixed with liquid WPC all as directed . |
| 10 | M&L plain cement concrete type B-1 1:2:4 mix (using 20 mm graded stone agg) as in coping, parapets , bed plates, kerb and the like rounded or chamfered on edges complete all as specified and directed. |
| 11 | Dismantling existing water tank exc 500 & n,exc 1000 ltrs capacity ,setting aside or lowering if reqd for repairs ,cleaning etc and hoisting ,reconnecting and refixing in position complete all as specified and directed |
| 12 | Dismantling water tank n, exc 1000 ltrs complete all as specified and directed. |
| 13 | S&F rotational moulded polyethylene water storage tanks three layers (Cylindrical vertical with closed top) of1000 ltrs capacity hoisted and fixed in position all as specified and directed in SSR Pt I. complete all as specified |
| 14 | S&F in repair PVC ball cock, 20 mm bore high pressure of PTMT epoxy coating aluminium rod , with polythene float and flynut complete, screwed for iron pipe complete all as specified and directed(Min wt =210gm ) |
| 15 | S& Fixed in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed complete all as specified |
| 16 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15 mm bore complete all as specified and directed. |
| 17 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20 mm bore complete all as specified and directed. |
| 18 | Providing and fixing 20 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and including Concealed work, including cutting chases and making good the walls etc.including testing of joints complete as per direction of Engineer in Charge. |
| 19 | Providing and fixing 25 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 20 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed. |
| 21 | Dismantling of cast iron or reinforced concrete drain pipes 100/75mm dia of any radius jointed in cement mortar and taking out of trenches, if required complete all as specified |
| 22 | S&F 110 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints fixed to walls with MS clamps complete all as specified and directed. |
| 23 | S&F 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints fixed to walls with MS clamps complete all as specified and directed. |
| 24 | S&F 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints laid in trench or in floors complete all as specified and directed. |
| 25 | S&F PVC (SWR) bends any radius of bore 110 mm complete all as specified and directed. |
| 26 | S& F Bore 110 mm PVC (SWR) bends any radius provided with access door all as specified and directed |
| 27 | S& F Bore 75 mm PVC (SWR) bends any radius provided with access door all as specified and directed |
| 28 | S& F Bore 75 mm PVC (SWR) bends any radius all as specified and directed |
| 29 | S&F PVC Bore 110mm (SWR) branch piece,double (double Y) equal or unequal provided with access all as specified and directed |
| 30 | S&F PVC Bore 75mm (SWR) branch piece,double (double Y) equal or unequal provided with access all as specified and directed |
| 31 | S&F PVC (SWR) vent cowl Bore 110mm all as specified and directed |
| 32 | M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement Diameter of outlet in75 mm all as specified and directed |
| 33 | S& F PVC (SWR) couplers bore dia 75 mm complete all as specified |
| 34 | S& F PVC (SWR) couplers bore dia 110 mm complete all as specified |
| 35 | S&F in repairs vitreous china squatting pan orissa pattern size 580 x 440 mm white with integral foot rest including cast iron \\"P\\" or \\"S\\" trap and PVC flush pipe but excluding flushing cistern including making good floor as per existing complete all as specified |
| 36 | S & F in-repair Vitreous china wash basin, white, flat back of size 550mm x 400mm including cutting for and pinning in ends of the brackets or erecting stand complete all as specified. |
| 37 | S & F PVC waste pipe 900mm long with threaded cup suitable for 32mm dia couplings for urinal and wash hand basin complete all as specified |
| 38 | S & F 32 mm dia Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm-45gms/40mm-60 gms complete all as specified and directed |
| 39 | S & F in-repair PVC low level flushing cistern dual flush white colour 10 Litres capacity, valve less, with inlet, ball valve, float and handle including brackets, PVC flush bend pipe. complete all as specified |
| 40 | S & F in repairs; stop valves/angle cock 15mm dia of pipe in cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed but fancy type chromium plated with long shank and cup . complete all as specified. |
| 41 | S & F in repairs; PVC connection 45 cm long with two nuts and washers complete all as specified. |
| 42 | S&F 15mm Brass CP mixer for mixing for kitchen sink hot & cold water screwed down for iron pipe and fixed complete all as specified. |
| 43 | S&F 15mm Brass CP mixer 2 in1 for mixing for WHB hot & cold water screwed down for iron pipe and fixed complete all as specified. |
| 44 | S&F 15mm CP brass wall mixer three in one with hand shower with accessories with mark Hot and Cold complete all as specified and directed |
| 45 | S & F in repairs; 15mm bib taps, chromium plated with fancy head with or without lettered “Hot” or “Cold” screwed down, screwed for iron pipe of 15mm bore dia fancy type complete. |
| 46 | S&F corner self fancy type three tier with 5.50mm thick glass mounted on CP brass frame fixed with brass screw & plug .Size n less than 450mm as suitable for bath room as per manufacturer instruction complete all as specified |
| 47 | S&F in repair CP grating 125 mm dia with or without hole to match the colour of floor tile complete all as specified and directed(Min Wt 40 gms).complete all as specified and directed. |
| 48 | S&F in repair CP grating 100 mm dia to match the colour of floor tile complete all as specified and directed(Min Wt 40 gms).complete all as specified and directed. |
| 49 | S & F in repair brass chromium plated shower rose 125mm size with swivel joint incl a shower arm 15mm size, 195mm long with bend of 45 degreee with flange complete all as specified. . (Minimum weight 40 gms)complete all as specified. |
| 50 | S & F 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers,complete all as specified and directed. |
| 51 | S & F tubular towel rail 20mm dia D type 60cm long between flanges brass chromium plated complete fixed to walls, complete all as specified and directed. |
| 52 | Supply and fixing fancy type soap dish, chromium plated complete all as specified and directed. |
| 53 | S & F in repairs sinks made of stainless steel 1mm thick in kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 54 | S & F in repair stainless steel plate rack made out of 1mm thick steel sheet of size 75cm x 90cm x 25cm (minimum weight 3.5 Kg) with fixing arrangement complete as per sample kept in GE`s Office suitable for officers quarters complete all as specified and as directed by Engineer-in-Charge. |
| 55 | Taking down cement plaster including racking out joints hacking for key and scrubbing down with water complete all as specified and directed. |
| 56 | M&L for 15 mm thick rendering in CM (1:4) on brick or concrete surfaces finished even and smooth upto 12mtr height including mixed with liquid WPC as per manufacturer instruction complete (Note :- WPC will be measured and paid separately).complete all as specified and directed. |
| 57 | M&L for rendering 15 mm thick in patch in cement mortar 1:6 on fair face of brick work or concrete surfaces with surface finish even and smooth complete all as specified and directed. |
| 58 | Supply only liquid water proofing compound complete all as specified and directed |
| 59 | M&L for 5 mm thick rendering in CM (1:3) on concrete surfaces on ceiling complete all as specified and directed. |
| 60 | M&L for preparation of new plastered surface of wall and applying two coat of cement base paint over one coat of primer complete all as specified and directed. |
| 61 | M&Lfor preparation of new plastered surface of wall and applying two coat of oil bound distemper over a coat of wall care putty surface of walls complete all as specified and directed. (wall care putty, their application, finishing etc shall be measured and paid seperately)complete all as specified and directed. |
| 62 | M&L for three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and directed. |
| 63 | M&L for preparation of old surface incl brooming down or steel wire brushing ,scrapping down smoke soot ,moulds , moss and efflorescence salts and applying one coat of white wash on old decorated surfaces on ceiling complete all as specified and directed. |
| 64 | M&L complete removal of existing treatment on walls and applying two coat of cement base paint complete all as specified and directed. |
| 65 | M&L complete removal of existing treatment on walls and applying two coat of oil bound distemper after applying wall care putty complete all as specified and directed (wall care putty, their application, finishing etc shall be measured and paid seperately) |
| 66 | M&L for applying a coat of 1mm thick wall care putty (JK/Birla white ) on wall and finishing the walls to an even and smooth surface by sand papering etc complete all as specified and directed. |
| 67 | Dismantling floor, hearth or wall tiling including cement mortar bedding / terrazo dado etc (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 68 | M&L for 25 mm thick PCC (1:2:4) type B -0 (using 12.50 mm graded stone aggregates) complete all as specified and directed. |
| 69 | M&L Glazed ceramic Coloured tiles joint free in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over a 10mm cement plaster of 1:4 on fair faces of brick work or concrete surfaces all as specified and directed. |
| 70 | Non Skid colour ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match screed bed or bedding layer of mortar 15 mm thick for laying floor finish (1:6) all as specified and directed. |
| 71 | S&F non skid Ceramic coloured tiles joint free 7-8mm thick (Square/rectangular) polished area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,screed bed or bedding layer of mortar 20mm thick for laying floor finish (1:6) all as specified and directed. |
| 72 | Demolition of brick work built in cement mortar or cement lime mortar including all quions, arches, pillers etc complete all as specified and directed. |
| 73 | M&L for fly ash old size Brick works, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 74 | Taking down chowkat or frame with shutter( without taking off shutter from frame ) exc 1.5 & n exc 4 sqm each complete all as specified and directed |
| 75 | Taking down chowkhat or frame with shutter (without taking off shutter from frame) n exc 1.5 sqm each complete all as specified and directed |
| 76 | Taking down shutter of any description exc 1 sqm and n exc 2sqm each complete all as specified and directed |
| 77 | Refixing shutter includes taking down, easing and adjusting and also refixing builders hardware of any description exc 1.00 sqm and n exc 2.00 sqm each including easing and adjusting and refixing in same opening all as specified and and directed |
| 78 | S & F factory made PVC door frame of size 50 x 47mm with a wall thickness of 5mm grid PVC sheet mitered at corner and pinned with two members 150mm long brackets of 15 x 15mm MS Square tube 19 gauge EPDM rubber gasket weathered sheet to be provided through the frame, door frame to be fixed to the wall suing MS screw of 65/100mm size complete as per manufacturer specification. |
| 79 | S & F 30mm thick factory made solid panel PVC door shutter conforming as per IS-4020 made from MS tube of 19 Gauge thickness of size 19 x 19mm style and 15 x 15mm for rail covered with heat moulded PVC channel of 5mm thick and 75mm, 125mm, 125mm wide for top rail, lock rail and bottom rail on either side at 5mm thick 20mm wide cross PVC sheet of gap inserted for top rail and bottom rail, paneling of 5mm PVC sheet fitted in MS frame welded/sealed to the style at rail with 30mm wide, 5mm thick PVC sheet beading sides and jointed together with solvent cement adhesive etc including aluminium mongery complete all as specified and directed by Engineer-in-Charge. |
| 80 | M&L 2nd class hard wood for Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 81 | M&L for Flush shutters, 30MM solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 82 | M&L for Glazed and skeleton 35 mm shutters 2nd class hard shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges offraming plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbersof shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats but divided into squares, with plain, Chamfered or rounded, mitred and rebated sash bars,any numbers |
| 83 | S&F Mild steel sliding door bolts 300 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 84 | S&F Mild steel sliding door bolts 250 mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 85 | S & F 100mm long Mild steel butt hinges, cold rolled MS, medium type,and fixed complete all as specified and directed. |
| 86 | S&F 100mm long Aluminium hinge , cast type, anodised complete all as specified and directed. |
| 87 | S & F for 125 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 88 | S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 89 | S&F 125 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 90 | S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 91 | M&L in repair 140mm length of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floorcomplete all as specified and directed. |
| 92 | M&L for preparation and painting to new wooden surfaces of any description not otherwise described over 10cm width or girth, with two coats of synthetic enamel paint (1st quality), over one coat of pink primer including preparation of surface complete all as specified |
| 93 | M&L for preparation and painting to new steel surfaces of any description not otherwise described over 10cm width or girth, with two coats of synthetic enamel paint (1st quality), over one coat of red oxide primer including preparation of surface complete all as specified |
| 94 | M&L for preparation painting to old wooden surfaces of any description not otherwise described over 10cm width or girth, with one coat of synthetic enamel paint (1st quality), complete all as specified |
| 95 | M&L for preparation and painting to old steel surfaces of any description not otherwise described over 10cm width or girth, with one coat of synthetic enamel paint (1st quality), complete all as specified |
| 96 | M&L for treating small article such as hold fast area n.exc 0.1 sqm each with black tar or coal tar black paint.complete all as specified and directed. |
| 97 | M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in bed block hold fast etc including necessary from work complete all as specified and directed. |
| 98 | S&F for mild steel for Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 99 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay & MS tower bolt 100mm(4Nos) , complete with glazing bars, dovetailed or welded complete all as specified |
| 100 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay & MS tower bolt 100mm(4Nos) , complete without glazing bars, dovetailed or welded complete all as specified |
| 101 | M&L mild steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified. |
| 102 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 103 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 104 | Hacking out old broken glass (any thickness, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified. |
| 105 | S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square in n exc 0.5 sq.m in each pane complete all as specified. |
| 106 | S & F of aluminium anodised powder coated of approved colour, sliding type three track (02 glazed shutters and 01 gauzed shutter) window with sliding shutter and frame with and including aluminium grill, 5 mm thick tinted glass and mosquito proofing net as detailed below complete all as specified and directed: -(i) Frame section 91.85 X 31.75 X 1.30 mm, section No. 8758 for top and sides rails and 91.85 X 31.75 X 1.20 mm for bottom rail, section No. 8687. (ii) Shutter for top, bottom and side rails 40 X 18 X 1.50 mm, section No. 8820.(iii) Glass 5.00 mm thick one side reflective glass and other side visible fixed with rubber gasket and aluminium clips bearing section No. 4407 and necessary handles, tower bolt etc. as directed. (v) Stainless steel wire cloth fix with aluminium fame(vi) Filling of gap between wall and aluminium frame with silicon putty to make it proper water tight.(vii) Locking arrangement and providing Namda rope to make the frames air tight. |
| 107 | S&F powder coated anodised aluminium window and ventilators shutters, side hung type with out sash bars,aluminium sections weighing 0.55 Kg/m including necessary jointing cleats |
| 108 | S&F Anodised powder coated aluminium frame for doors window and ventilator (minimum thickness of powder coating 50microns) with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 109 | S &F for 5.5 mm thick sheet glass(tinted/reflective type) in square each pane complete |
| 110 | S&F in rep 20 mm dia SS curtain rod with fixing brackets , stops , side fancy rollers ets complete all as specified. |
| 111 | S & F of 18mm thick HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over MDF board,anti fungal,moisture resistence,anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc. complete all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE . Make:-Action tessa/Greenply/ Century |
| 112 | S & F of 18mm thick HDHMR board exterior grade, Both side laminated with any colour anti fungal,moisture resistence,anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading etc. complete all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE .Make:-Action tessa/Greenply/ Century |
| 113 | S & F of 12mm thick UV coating, HDHMR board exterior grade, Both side laminated with any colour anti fungal,moisture resistence,anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading etc. complete all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE Make:-Action tessa/Greenply/ Century |
| 114 | Providing and fixing magnetic catcher of approved quality in cupboard /wardrobe shutters, including fixing with necessary screws etc. Triple strip vertical type complete all as specified and directed. |
| 115 | S&F 40 mm dia cupboard knobs fixed with nut, screws of brass bright complete all as specified and directed. |
| 116 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. |
| 117 | S&F 100mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws |
| 118 | S & F stainless steel cupboard/cabinet / drawers handle having a length of 250mm and shape complete all as specified and directed. |
| 119 | S&F in repair brass Locks 2 levers, for cupboard, grade I, size 65mm |
| 120 | Demolition of Stone Laid, bedded and pointed in any mortar sett paving of any description of thickness. |
| 121 | S&F udaipur Green stone work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade |
| 122 | S&F udaipur Green stone work 18 to 20mm thick (table rubbed and polished) in riser, dado and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade |
| 123 | M&L rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and directed. Please Enable Macros to View BoQ information |
| 124 | M&L rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender