Tender For Repair/ Maintenance Incl Filling Of Joints And Connected Item In Runway Area, B/R And E/M Nature Of Hanger And Periodic Painting Of Runway At 1 (I) & R&O Flt And Repair/ Replacement Of Damaged, Switches, Sockets, Led Light Fittings, Submai
Tender Value
30 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
19 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Incl Filling Of Joints And Connected Item In Runway Area, B/R And E/M Nature Of Hanger And Periodic Painting Of Runway At 1 (I) & R&O Flt And Repair/ Replacement Of Damaged, Switches, Sockets, Led Light Fittings, Submain Wiring, Unsv Aluminium Point Wiring, Mccb, Mcb, Db, At Engr Lines, Kurukshetra Lines, Did Lines & Rameshwaram Line Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully exising unserviceable copper/aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed. |
| 2 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- (Note- Modular cover plate and base plate of any module with all fittings are included in point wiring.) Contractor should make good even distributed wall/surface as before. |
| 3 | (a) One light point controlled by one, one way switch 5 Amps |
| 4 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 5 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 6 | (d) One bell point controlled by one, bell switch 5 Amps |
| 7 | (e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 8 | Description all as per item No 2 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 9 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :- (Note- Modular cover plate and base plate of any module with all fittings are included in point wiring.) Contractor should make good even distributed wall/surface as before to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 10 | (a) One light point controlled by one, one way switch 5 Amps |
| 11 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 12 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 13 | (d) One bell point controlled by one, bell switch 5 Amps |
| 14 | (e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 15 | Description all as per item No 4 here in before but using 2.5 sq mm single core copper conductor FRLSHH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC insulated copper conductor FRLSHH cable as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 16 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-(Contractor should make good even distributed wall/surface as before.) |
| 17 | (a) One light point controlled by one, one way switch 5 Amps |
| 18 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 19 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 20 | (d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 21 | Description all as per item No 6 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 22 | S & F for Modular Switch single pole, one way, and 5/6 Amp single module complete all as specified. |
| 23 | S & F for Modular switch single pole, one way, and 15/16 Amp single module complete all as specified. |
| 24 | S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp (set of 3 switches) , including junction box complete all as specified. JAQUAR Cat Part No SWG-GRY-GL16A3G01 , Havells AHLPLCGV03, Anchor 21328WH |
| 25 | S & F for Modular Switch Socket combination outlet multipurpose having provision for 3 pin, 15/16 Amp including junction box complete all as specified. JAQUAR Cat Part No SKG-GRY-GL16ASC1GS1, Havells ACGPTOFV03, Anchor 85366990 |
| 26 | S & F ceiling fan regulator rotary type heavy duty suitable to work on 230 volts AC supply including junction box and removal of old unserviceable one complete all as specified. JAQUAR Cat Part No SWG-GRY-GL1ARFSS, Havells ACYRFHG008, Anchor 84149030 |
| 27 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 28 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 29 | S & F ceiling fan regulator socketed, step type, 1 Module heavy duty suitable to work on 230 volts AC supply including removal of old unserviceable one complete all as specified. |
| 30 | S & F ceiling fan regulator socketed, step type, 2 Module heavy duty suitable to work on 230 volts AC supply including removal of old unserviceable one complete all as specified. |
| 31 | S & F for Bell push modular 6 Amps single module complete all as specified. |
| 32 | Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 33 | S & F for Lamp holder, PVC body suitable for batten fitting completes all as specified. |
| 34 | S & F for Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified |
| 35 | S & F for Switch piano flush type, single pole, one way, and 6 Amp complete all as specified. |
| 36 | S & F for Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified. |
| 37 | S&F in replacement of switch socket combinations flush 5 Amp 5 pin competeI ,ISI marked |
| 38 | S&F switch socket combination 2 in 1, 3 pin, 15 amp multipurpose, flush type, all as specified and as directed |
| 39 | S & F for wall mounted LED tube light fitting not less than 22 W, 220V, 4000K batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Cat Part phillips BN021 LED22S 4000K PSU GR, Jaquar BTI-WHT-LGLZU1X022XW or Havells- LINEBS22WLED865SPCWH |
| 40 | S & F for wall mounted LED tube light fitting not less than 22 W, 220V, 6500K batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Cat Part phillips BN021 LED22S 6500KPSU GR, Jaquar BTI-WHT-LGLZU1X022XW or Havells- LUMILINEBS22WLED865SPCWH |
| 41 | S & F for LED lights fitting not less than 20 W, 220V, AC box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Cat Part No Bajaj BCLSB 20 WH, Jaquar BTI-WHTLTBL01X020XC or crompton TCS-109-20-65-SL-DP-NWH. |
| 42 | S & F for LED 10 watts batten with decorative end caps complete all as specified and as directed. |
| 43 | S & F for Highly efficient LED Bulbs, 10 W, of make Bajaj, Havells, Philips complete all as specified and directed |
| 44 | Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed. |
| 45 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified. |
| 46 | S & F ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts AC supply including removal of old unserviceable one complete all as specified. |
| 47 | S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make : Schneider, Havells, ABB. |
| 48 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 4 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4.0 sqmm cable,one run of 4 sqmm cable and one run of PVC casing caping will be measured as one unit |
| 49 | S & F for sheet metal enclosure MCB DB VTPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.Make : Schneider, Havells, ABB. |
| 50 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.Make : Schneider, Havells, ABB. |
| 51 | S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.Make : Schneider, Havells, ABB. |
| 52 | S & F MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 100 Amps with extended terminals complete all as specified. |
| 53 | S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 volts breaking capacity 10 KA including removal of old unserviceable one complete all as specified and as directed. |
| 54 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one complete all as specified and as directed. |
| 55 | S & F for MCB Single pole and neutral rated capacity 40-63 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one complete all as specified and as directed. |
| 56 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one complete all as specified and as directed. |
| 57 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 58 | Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed. |
| 59 | Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 2.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed. |
| 60 | Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 4 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed. |
| 61 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC casing caping will be measured as one unit |
| 62 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC casing caping of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size in wall etc including one run of PVC insulated 4 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4.0 sqmm cable,one run of 4 sqmm cable and one run of PVC casing caping will be measured as one unit |
| 63 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC casing caping of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC casing caping will be measured as one unit |
| 64 | S & F for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 65 | S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including provision of LED bulb 10/12 watts complete all as specified and as directed. Make- Havells, Philips, Bajaj. |
| 66 | S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :- Bajaj , Philips, Havells. |
| 67 | S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed |
| 68 | S&F Fan condenser, 2.5 Mfd, 240 volts for fan including PVC clamp at different locations as per site given by Engineer-in-Charge |
| 69 | S & F for recess mounted 2' x 2' square LED panel 36 watts, 596 x 596 x 9 mm size, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. |
| 70 | S & F for LED post top lantern (gate light) 20 watt light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection complete with all accessories fixed on GI pipe 50 mm dia including removal of old unserviceable one complete all as specified and directed. |
| 71 | S&F LED highbay light 150 W & replacement of defective wiring with PVC copper wire inside conduit pipe with fixed at the ceiling of Hangar. |
| 72 | S & F for metal body exhaust fan, AC single phase, 240 V of size 225 mm sweep 1380 rpm with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and M&L for making hole and proper finishing the surface as existing before and taking down of old unserviceable fan complete all as specified and as directed |
| 73 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 74 | Racking out of old existing sealant compound and back up rod of the existing joints by special tools like cutting blades/machine, widening of joints by 2 mm by using joints cutting blades of appropriate size, straight and smooth edges. Joint cleaned thoroughly with applications of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt, oil, vegetation and other debris. Application of two coats of primer with thin brush by forward and backward movement at an interval of 30 minutes before pouring the backup rod and pouring the sealant. Thereafter filled with closed cell, medium density, cross linked polyethylene foam backup rod of 8mm dia for complete length of the joint over if to be filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212 BS 4254 and EN141875-2003 with minimum movement accommodation factor (MAF) OF +-30%. Make of sealant compound : Sika India Pvt Ltd/ IWL India Ltd/ Bostik India Pvt Ltd/ Asian Paint Ltd. |
| 75 | Racking of old existing sealant compound, back up rod and filler board of the existing joints by spl tools like rocker /cutting blades/Machine widening of joints by 2mm by using joint cutting blades of appropriate size, straight and smooth edges joint cleaned thoroughly with applications of compressed air. Joint shall be made dry, vacuum cleaned and free of dirt oil vegetation and other debris. Applications of two coats of primer with thin brush by forwarded and backward movement at an interval of 30 minutes before placing the filer board and pouring the sealant. Thereafter filled with pre molded 25mm thick compressible polyethylene closed cell tpe filler board as specified, over it filed with closed cell, medium density, cross linked polyethylene foam backup rod of 30mm dia for complete length of the jont. Finally filled with polyurethane joint sealant meeting the requirements mentioned in BS-5212, BS-4254 and EN-141875-2003 with minimum movement accommodation factor MAF of +-30%. Make of sealant compound : Sika India Pvt Ltd/ IWL India Ltd/ Bostik India Pvt Ltd/ Asian Paint Ltd. |
| 76 | Dimantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings . |
| 77 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution complete. |
| 78 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering as ridge/cladding to wall, fixed with self tapping screws as specified |
| 79 | S&F Plain, galvanised, mild steel sheeting 0.63 mm thick, in ridges,hips, valley gutters,chajjas, drip and straight flashings with grade of zink coating 275. |
| 80 | Dismantling wrought iron or mild steel work of any description not otherwise provided |
| 81 | S&F for Roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc complete Fe 410-W(Gde E-250) quality-A. |
| 82 | Scarpping surfaces of roof by wire brushing and removing all loose dust and cleaning and washing down the surfaces with water complete all as directed. |
| 83 | M&L for 10 mm thick plaster in cement mortor 1:3 laid over roof with integral water proofing admixture @ 200 ml per 50 kgs of cement (after the cement is cured the roof will be testd for water tightness by ponding with water for seven days of any seepage/leakage etc.) Note :- supply only water proofing compound shall be measured and paid separately. |
| 84 | M&L Applying membrane on primed surface by press application method with minimum 75 mm longitudinal wise lap and 100 mm over lap on the transverse direction duly sticked using 3 mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished non woven polyester reinforced (wt not less than 150 grams) over applying one coat of bituminous primer @ 0.4 kg per Sqm complete all as specified and directed. |
| 85 | M&L for two coats of bituminous based aluminum paint on APP membrane all as specified and directed. |
| 86 | Dismantling water tanks Capacity in Exc 250 & n Exc. 500 litres and removing to store |
| 87 | S & F Rotational moulded polyethlene water storage tanks three layered (cylindrical vergical with closed top) Capacity in 500 litres hoisted and fixed in position all as specified in SSR Part I |
| 88 | Dismantling water tanks Capacity in Exc 500 & n exc 1000 litres and removing to store |
| 89 | S & F Rotational moulded polyethlene water storage tanks three layered (cylindrical vergical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I |
| 90 | S&F 20 mm bore PVC Ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minium weight 20 mm-210 gms). |
| 91 | S&F in repair 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe. |
| 92 | Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site. |
| 93 | Supplying and laying of 15mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 94 | Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site . |
| 95 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 96 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site . |
| 97 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n’exc1.5 Sqm and removing from site . |
| 98 | S&F as in hold fasts; conforming to Fe -290 Gde E-165 complete. |
| 99 | M&L PCC 1:2:4 type B0 using 12.5mm graded stone aggregate for fixing of hold fast and making good . |
| 100 | M&L for Pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete |
| 101 | M&L for Pressed steel frames 105 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete. |
| 102 | S&F 2nd class hard wood 30 mm thick glazed & skelton shutter (any no of pannel) open rebated and prepared to receive glass, gauge etc with sush bar edges to framing plain chamfered or receive glass gauge etc with sash bar edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24 (a). |
| 103 | S&F particle board core factory made solid PVC Moulded door shutter 28 to 30mm thick (stiles) with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back faces,and with particle Board Core supplying and fixing in frame at site as per specification and drawing. |
| 104 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2004 complete all as specified and as directed. |
| 105 | S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2004) . |
| 106 | S & F 100 mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 . |
| 107 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete. |
| 108 | S&F of 150 mm size aluminium handles cast type anodised. |
| 109 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified |
| 110 | S & F Power coated Anodised aluminium window and ventilator shutters, side hung type or two or three track type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.if use sliding tack provide all locking arrangement,rubber beading,cleat incl all fitting and fixture complete. |
| 111 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane. |
| 112 | S&F in repair door closer hydraulically regulated, designated No- 2 universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg aluminium (die cast) body. |
| 113 | S&F door closer hydraulically regulated, designated No- 2 universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg aluminium (die cast) body. |
| 114 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 115 | S&F floor door stoper of brass body and tongue, anodised with hard drawn steel spring over all length of cover plate 140 mm complete all as specified and directed. |
| 116 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples . |
| 117 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing pins/spring clips in square n exc. 0.5 sq. m in each pane |
| 118 | Description all as per above ser item No 103 but figured glass pin headed type n.exc 0.50 sqm each complete. |
| 119 | M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to fe.290.Gde-E-165 |
| 120 | Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc |
| 121 | M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6 |
| 122 | M&L Brick work with sub class 'B' Brick straight or curved on plain to any radius in half brick thick wall built in cm 1:4 |
| 123 | Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level). |
| 124 | M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement complete. |
| 125 | M&L 18-20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) as bedding layer including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required. |
| 126 | Demolition of cement concrete (reinforcement) any description and positin not other wise specifically. |
| 127 | M & L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc. |
| 128 | Use & waste frame work to soffits of suspended slab such as floor or roof slab, chajjas and similar work not exc 200 mm thick (Horizontal or slopeing) rough finished complete. |
| 129 | M & L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to |
| 130 | Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses. |
| 131 | M&L, 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes . |
| 132 | M & L 10mm thick rendering plastering in Cement Mortar 1:4 on fair faces of brick work orconcrete surface to receive wall finishes. |
| 133 | M&L coloured/ printed non-skid joint free ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match . |
| 134 | Description all as per above ser item No 119 but on vertical surfaces. |
| 135 | M&L for coloured glazed ceramic tiles in vertical surface 350x250x7mm/450x350xx7mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces |
| 136 | M&L vitrified tiles of any colour/shade 10 mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles . |
| 137 | M&L Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles |
| 138 | Cutting chases, pinning in, in brick walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making not exc 10 cm girth. |
| 139 | S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors |
| 140 | S&F PVC bends any radius 100 mm dia |
| 141 | S & F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing complete all as specified and as directed. |
| 142 | S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc complete including making good to floor. |
| 143 | S&F in repair vitreous china single piece including cistern watre closet white size 645 x 365 x 702 mm Dual flush 3/6 litres including connection to trap, etc complete and making good to floor. |
| 144 | S&F in repair vitreous china pedastal type watre closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor. |
| 145 | S&F in repair vitreous china urinals,bowl type (back or corner wall type), complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1;2 securing to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets,flush pipe,grating and union for discharge pipe. (Exclusive of supply pipe to flushing cistern, and waste pipe |
| 146 | S&F in repair EWC sheet cover all as specified. |
| 147 | S&F, in repair 10ltr capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket . |
| 148 | S&F in repair, 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends. |
| 149 | S & F in repair, 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule. |
| 150 | S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (conceaeld type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spfd & directed by Engr-in-charge. |
| 151 | S&F 32 mm bore dia of dishcharge pipe Waste coupling of PTMT(half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) |
| 152 | S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern |
| 153 | Supply only of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe. |
| 154 | S&F in repairs of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe. |
| 155 | S&F in repairs Health fauset (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified. |
| 156 | M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete. |
| 157 | S&F 18 mm thick Rajshree Celuka ply or equivalent as approved of grade 1 quality with both side plain white or coloured fixed with stainless steel screwes, solvent cement /adhesive to fabricate kitchen cabinet sides , top and bottom, door, shelf inside the cabinet and drawer including ,drawer chanel, magnetic ballcatch & other all fittings complete all as per manufacturers instructions incl taking out old existing wooden cabinate. |
| 158 | M & L for preparing old plastered surfaces of wall and and applying one coat of distemper oil emulsion, white or tinted complete all as directed. |
| 159 | Description all as per above ser item No 144 but on ceiling |
| 160 | M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 2 mm thick wall care putty complete all as directed |
| 161 | M&L for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 Itr/10sqm over and including priming coat of exterior primer applied @ 0.90 Itr/10sqm over a coat of plaster of paris putty of 1mm thickness after complete removal of existing treatment on wall surfaces. |
| 162 | M & L, 10mm thick rendering on fair faces of brick work/concrete surface in CM (1.6) surface finished fair & even complete. |
| 163 | M&L for preparation of new plasterd wall surfaces and applying two coat of oil bound distemper of approved colour and shade over one coat putty |
| 164 | M&L for preparation of old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted complete all as directed. |
| 165 | Description all as per above ser item No 150 but applying two coat of synthetic enamel paint white or tinted complete all as directed. |
| 166 | M&L for preparation of old painted steel surface of any description, over 10 cm width or girth not otherwise described and applying one coat of synthitic enamel paint white or tinted all as directed by Engr-in-charge |
| 167 | M & L for two coats Painting lines, dashes, arrows, letters,etc. on roads pavements and the like n exc 10cm wide with road marking paint, white or golden yellow using thermoplastic application unit etc, complete all as specified & directed by Engr-in-charge. |
| 168 | M&L for two coats Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow complete all as directed Engr-in-charge. |
| 169 | M&L for preaparing bituminious surfaces of road and marking 1.50 mm thick centre lines, stop lines, dashes,arrows etc.and the like n. exc 10cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender