Tender For special Repair To Cook House Cum Dinning Hall Of Cadre Coy A Mess Bldg No 25-26A At No 2 Trg Bn, Aoc Centre Under Ge (South) Secunderabad
Tender Value
46.52 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
1 days left
EMD
93100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Cook House Cum Dinning Hall Of Cadre Coy A Mess Bldg No 25-26A At No 2 Trg Bn, Aoc Centre Under Ge (South) Secunderabad
BOQ
| Sl. No. | Item Description |
| 1 | Dismanting single layer mangalore pattern or similar tiles in roofing including removal of battens complete all as specified and directed. |
| 2 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 3 | S & F prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 4 | S &F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 5 | S&F pre painted galvalume aluminium zink coating GI based plain steel sheeting 0.5mm thick of any colour haing tensile strenghth of 550 MPA as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 6 | Dismantling framed wooden purlin/Rafter work of any description sectional area n exc 40 Sqcm not other wise provided for, complete all as specified and directed. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided etc. complete all as specified and directed. |
| 8 | S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A.complete all as specified and directed. |
| 9 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, hanging also fastening and fixing incl tacking down of existing framed gates etc complete confirming to grade Fe-410 W E250 quality A.complete all as specified and directed. |
| 10 | M & L for providing cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) as in roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed. |
| 11 | Demolition of cement concrete in roof inc existing roof treatement (other than ground floor) and removing debris to a distance of n.exc 100M away from the bldg complete all as specified and directed. |
| 12 | M & L for 25 mm average thick PCC (1:2:4) Type B0 by using 12.50 mm graded crushed stone aggregate as in roof where required over slabs and finishing the exposed surfaces fair even without using extra cement complete all as specified and directed. |
| 13 | M&L for removal of old treatment of any description and removing the debris roughening the surfaces of old concrete roof surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 14 | M & L for 10mm thick rendering in CM 1:4 using water proofing compound at the rate of 3% weight of cement over concrete surfaces complete all as specified and directed. ( Note : WPC measured and paid separately) |
| 15 | M&L for priming the plastered roof surfaces with bitumenous primer @ 0.30 Kg per sqm and applying APP based polymeric membrane minimum weighing 3 Kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/per Sqm) and on primed surface by forced application over apply bitumen base aluminium paint @ 0.20 Kg/Sqm complete all as specified and directed. |
| 16 | Supply only water proofing compound.complete all as specified and directed. |
| 17 | M&L for preparation of old steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint.complete all as specified and directed. |
| 18 | M&L Preparatioin of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc primer. complete all as specified and directed. |
| 19 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed. |
| 20 | M & L for brick work with subclass ‘B’ bricks (red bricks) straight or curved on plan exceeding 6M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 21 | M&L for Pre-cast cement concrete block masonry with solid blocks type C1 (1:3:6) (20mm graded stone aggregate) set in CM 1:6, exc. 10 cm in width and setting in mortar, complete all as specified and directed. |
| 22 | Taking down plastering on brick walls etc including racking out joints, hacking for key, scrabing down with water etc. complete all as specified and directed. |
| 23 | M & L for 15 mm thick (inner 10mm layer 1:6 and outer 5mm layer 1:4) rendering in Cement Mortar on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement and using water proofing compound for outer 5mm layer complete all as specified and directed incl scaffolding if necessary. Note : Patch work upto height 10.00m incl necessary scaffolding. complete all as specified and directed.Note:-(WPC will be measured and paid separately) |
| 24 | M & L for 15 mm thick rendering in Cement Mortar 1:6 on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and directed. |
| 25 | M & L for 10 mm thick rendering in Cement Mortar 1:3 on fair faces of Brick works or Concrete surfaces in ceilings and finishing even and fair without using extra cement. complete all as specified and directed. Note : Roof projection/sun shade portion upto ht 7.50m incl necessary scaffolding.complete all as specified and directed. |
| 26 | M&L for two coat of exterior emultion weather proof paint over a coat of primer and exterior putty on new surfaces of wall including preperation complete all as specified and directed. |
| 27 | M&L for two coat of oil bound distemper over a coat of primer and one layer of wall care putty including preparation of new plastered surfaces of walls complete all as specified and directed. |
| 28 | M&L for two coat of oil bound distemper over a coat of primer including preparation of new plasted ceiling complete all as specified and directed. |
| 29 | M&L for Complete removal of existing treatment on ceilings and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed. |
| 30 | M&L for Complete removal of existing treatment on walls and application of wall care putty and applying two coat of oil bound distermper over a coat of primer complete all as specified and directed. |
| 31 | M&L for complete removal of existing treatment and preparation of surfaces of wall and applying two coat of exterior emultion weather proof paint over a coat of cement primer and a coat external wall care putty complete all as specified and as directed. Note : weather proof paint will be done by Roller only, after complete removal of old loose flakes. |
| 32 | Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets. complete all as specified and directed. |
| 33 | M&L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605mm with aluminium main tee, cross tee size 25x25x1.6 mm and aluminium wall angle size 25x25x1.8 mm fixed to wall hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire 4mm thick with locking clip including Providing and fixing Non asbestos designer E-Board 4mm thick in ceiling fixed to snap grid as per manufacturers instructions complete all as specified and directed. |
| 34 | Taking down chowkat with frame (without taking off shutter from the frame) exc 1.50 Sqm n. exc 4 Sqm each complete all as specified & directed. |
| 35 | Cutting holes in brickwall builtin cement mortar depth of embedded portion of holdfast exc halfbrick but not exc one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed. |
| 36 | S&F pressed steel door frame 125x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates complete all as specified and directed Note:-(pcc filling of hollow section measured and paid seprately). |
| 37 | S & F 40 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on one side and one face is covered with deco rative face veneer with lipping/frame to match complete all as specified and directed. |
| 38 | S & F 35mm thick 2nd class hard wood glazed skeleton door shutters open rebated and prepared to receive glass, gauze, etc (without sash bars) and divided into square with plain, rounded, chamfered, mitred complete all as specified & directed. |
| 39 | S & F Aluminium handle 150mm fabricated type complete all as specified & directed. |
| 40 | S & F Aluminium anodised barrel tower bolts 200mm of extrded section complete all as specified & directed. |
| 41 | S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.complete all as specified and directed. |
| 42 | S&F ordinary rat tail rod pattern springs including roller and roller plate complete 200 mm long helical door springs including roller plate complete all as specified & directed. |
| 43 | S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and avg width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed. |
| 44 | M & L for preparation of new wooden surface and applying 2 coat of synthetic enamel paint over one coat of pink primer over 10cm width or girth complete all as specified and directed. |
| 45 | S & F Windows/Ventilators fabricated from roll framed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm.Paint Specifications:Coated sections should be with Primer coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick or Powder Coated with pure Polyester up to 50-60 microns thick.Dimensions of Sections:Sections for Frame should be of 72mm x 55mm, Section for Mullion should be of 72mm x 50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12mm x 12mm, and Section for Fly Mesh should be of 40mm x 20mm.Fixing Details: Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter. |
| 46 | All as per item No 45Accessories:Each Glazed Shutter and Mesh shutter should be provided with SS Pivot Hinges – 1 set, Seccolor Handle & Seccolor Stay.Window Frame should be fixed to brick/ concrete masonry by using Nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frameGlass: Glass shutter & Fixed Glass portions should be provided with a glass of 4MM Plain Float Glass.Mesh:Mesh Shutter should be provided with a Stainless Steel Fly mesh of 304 grades. Grill:Windows should be provided with Grill made of 10mm sq. MS Bars welded to at 150mm center-to-center, 5mm x 10mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. Note: All existing wooden/steel windows & ventilators inclunded tacking down. Make NCL/Elixir and equilent |
| 47 | Demolition of cement concrete(unreinforced) in ground floors and paving nexc 15 cm thickness (below and above ground level) complete all as specified & directed. |
| 48 | M & L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement. complete all as specified & directed. |
| 49 | S&F 25mm Stainless steel curtain rods incl required nos of brackets complete all as specified & directed. |
| 50 | Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar.complete all as specified & directed. |
| 51 | M&L for cement concrete 75mm thick type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified & directed. |
| 52 | M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base flooring complete all as specifiead and as directed. |
| 53 | S&F 18-20 mm thick kota stone as in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish and rounding chamfered edges where directed complete all as specified and diirected. |
| 54 | All as per item 53 but 16 to 18m thick kota stone slab as in small wiidth in vertical surfaces like landings, risers,, treads, skirtings, dado, etc over and including 10mm thick pcking coat in cement mortar 1:4 complete all as specified and directed. |
| 55 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.complete all as specified & directed. |
| 56 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specifiead and as directed. |
| 57 | M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified & directed. |
| 58 | M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in skirting/dado surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed. |
| 59 | M&L for glazed ceramic coloured tiles of size 300x450x7mm thick in vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:3.complete all as specified & directed. |
| 60 | M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab for window cills, stair steps including rounding of edges, rubbing and polishing and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 61 | M&L for chequered cement concrete tiles with grey cement and pigments of size 300cmx300cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified & directed. |
| 62 | Taking down AC/PVC pipes of any description any pattern incl all fittings heads, shoes bends etc complete all as specified & directed. |
| 63 | S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls or in floors including clamps, bends, T & L complete all as specified & directed. |
| 64 | S&F PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints fixed to walls or in floors including clamps, bends, T & L complete all as specified & directed. |
| 65 | S&F rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position including taking down old water tank complete all as specified & directed. |
| 66 | S&F in repairs 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified & directed. |
| 67 | S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore.complete all as specified & directed. |
| 68 | S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete to walls and ceiling or laid in floors incl tacking down existing pipe complete all as specified & directed |
| 69 | S&F 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete to walls and ceiling or laid in floors incl tacking down existing pipe complete all as specified & directed |
| 70 | M & L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet in 75mm.complete all as specified & directed. |
| 71 | S&F in repairs for 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed |
| 72 | M & L for rendering 15mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces even and smooth without using extra cement as in manholes, septic tank, filter bed out let drain by using water proofing compound etc complete all as specified & directed. |
| 73 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified & directed. |
| 74 | M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all as specified & directed. Note:- Reinforcement will be measured and paid seperately |
| 75 | S/F MS TMT bars 10 mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed. |
| 76 | S &F for framed work such as grills, grating etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars(for windows); barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work cnforming to Fe 290. Gde E-165.complete all as specified & directed. |
| 77 | S&F Vertical looking mirror of size 48cm x 120cm to fixed in verandah of barracks including necessary bolts and fittings complete all as specified & directed. |
| 78 | S&F Bulletin/Pin-in/Notice board (Green, Maroon or Blue) of size 120cm x 90cm (4'x3') to be fixed in verandah of barracks including necessary bolts and fittings complete all as specified & directed. |
| 79 | M & L for taking down copper/aluminium point wiring (light, fan, socket, power, security lights or bulkhead) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified & directed. Please Enable Macros to View BoQ information |
| 80 | M & L for taking down copper/aluminium point wiring (light, fan, socket, power, security lights or bulkhead) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender