Tender For Repar To Flooring, Plastering, Plumbing Wks, Periodical Services, Misc Repair At Lkg And Jhallas And Repair To Fencing, Gates, Wall, Path, Drain, Protective Wks, Misc Wks In Various Units At Kg,Lkg And Jhallas Under Age B/R-Iii Of Ge 881 E
Tender Value
23.47 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
14 days left
EMD
46940
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repar To Flooring, Plastering, Plumbing Wks, Periodical Services, Misc Repair At Lkg And Jhallas And Repair To Fencing, Gates, Wall, Path, Drain, Protective Wks, Misc Wks In Various Units At Kg,Lkg And Jhallas Under Age B/R-Iii Of Ge 881 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: REPAR TO FLOORING, PLASTERING, PLUMBING WKS, PERIODICAL SERVICES, MISC REPAIR AT LKG AND JHALLAS AND REPAIR TO FENCING, GATES, WALL, PATH, DRAIN, PROTECTIVE WKS, MISC WKS IN VARIOUS UNITS AT KG,LKG AND JHALLAS UNDER AGE B/R-III OF GE 881 EWS. Contract No : GE/PNH-113/2025-26 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of cement concrete (un reinforced) in ground floors and paving n exc. 15 cm. thickness, below or above ground level, complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tile to store and rubbish off the premises complete all as specified and directed. |
| 4 | Dismantling or wall/ceiling board (fibre, pulp, insulation, etc) or insulation board slabs/blankets, of any thickness, including cover fillets complete all as specified and directed. |
| 5 | Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. |
| 6 | 4 mm thick E-board with and including fixing to frame work made Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl Seat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including fixing of E-board as per manufacturer instructions complete all as specified and directed. |
| 7 | Hollow PVC wall Lining / panelling consisting of 5mm thick plain colour PVC sheet including PVC fillets as per manufacturer instructions and fixing at site complete all as specified and directed |
| 8 | 50mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed. |
| 9 | Chequered cement concrete tiles with grey cement and pigments of size 30cmx30cm x25 mm thick,set, jointed and pointed in neat cement surry in floors laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and diected. |
| 10 | Non skid coloured ceramic tiles area of each tile exc 0.06 sqm but not exc 0.11 Sqm, 7 to 8 mm thick, as in floors etc. jointed in neat cement slurry and pointed in colored cement to match colour of tiles including 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed. |
| 11 | Glazed ceramic colour tiles in vertical surface 300x 200x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with the colour of tiles, fixed over and including 10mm thick plaster in cement mortar 1:4 complete all as specified and directed. |
| 12 | Rendering 15 mm thick in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified. |
| 13 | Rendering 15 mm thick in cement mortar 1: 6 on other than fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified and directed. |
| 14 | Applying two coats of cement base paint (in any pattern and colour) on walls over a coat of primer including preparation of new plastered or un-plastered surfaces of wall complete all as specified and directed. |
| 15 | Preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed |
| 16 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 17 | Dismantling of steel or wrought iron or mild steel of any description complete all as specified and directed. |
| 18 | Dismantling timber scantling 40 Sqcm and over section in any position complete all as specified and directed. |
| 19 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 20 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 21 | Mild Steel rolled section in purlin, main and cross beam, rafter,posts etc. incl connected cleats, hold fasts etc of grade conforming to Fe 410-W (Gde E-250 quality A) all as specified and direcetd. |
| 22 | Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 , complete all as specified and directed. |
| 23 | Second class Hard-wood in scantlings 40 sqcm and over in section , clean sawn timber framed and fixed, all as specified and directed. |
| 24 | Taking down shutter of any description, not exc 1.0 sq.m each complete all as specified and directed. |
| 25 | Taking down chowkats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 26 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutters from frame) complete all as specified and directed. |
| 27 | 2nd class HW plain, solid straight chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints. |
| 28 | 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat complete all as specified and directed. |
| 29 | 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and directed by engr in charge. |
| 30 | 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed complete all as specified and directed. |
| 31 | 75 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed complete all as specified and directed. |
| 32 | 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed.complete all as specified and directed. |
| 33 | 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 34 | 150 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed. |
| 35 | 100 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed. |
| 36 | 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 37 | Preparation of wood and wood based surfaces over 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed. |
| 38 | Supply and fix in repair figured glass, pin headed type, 3mm thick & glazing with oil putty in n. exc 0.5 sqm in each pane complete all as spd & directed . |
| 39 | Preparation of new steel & Iron surfaces, width or girth exceeding 10cm & apply two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as spd & directed. |
| 40 | Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 as specified & directed. |
| 41 | PCC ,1:3:6 type C1, using 20 mm crushed stone aggregate as in bed blocks for embedding hold fast etc. complete all as specified and directed. |
| 42 | Preparation of old surfaces of plastered or unplastered walls and applying one coat of white wash on walls complete all as specified and directed. |
| 43 | Preparation of old surfaces of plastered or unplastered walls and applying one coat of cement base paint on wall and AC sheet roof surfaces (any colour and pattern as approved) all as specified and directed |
| 44 | Taking up or down steel tubing of 15mm bore , medium grade, including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 45 | Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 46 | S&F in repair Bib tap fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed, complete complete all as specified and directed. |
| 47 | Stop valve/angle valve cast copper alloy,chromium plated with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed in repair complete, all as specified. |
| 48 | Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, snow white, with 'P' or 's' trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and syphonage pipe etc. fixed in repairs including lime concrete bedding, complete, all as specified and directed. |
| 49 | S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe as specified and directed. |
| 50 | PVC connection 45 cm long fitted with PTMT nut and washer on both ends, fixed to 15 mm bore iron pipes. |
| 51 | S&F in repair 15mm pillar taps fancy type, cast copper alloy , with capstan heads, chromium plated, screw down high pressure with long screwed shanks and fly nuts, screwed for iron pipes. |
| 52 | S&F in repair 32mm bore PVC waste pipe, complete all as specified and directed. |
| 53 | S&F in repair vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed. |
| 54 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 55 | Dismantling water tanks of any size or capacity above 500 but n exc 1000 L and removing to store complete all as directed. |
| 56 | Rotational moulded (HDPE), water storage tank 1000 litre capacity (cylinderical vertical with threaded closed top) hoisted & fixed in position all as specified in SSR Part-I complete all as spfd & directed. |
| 57 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe of 20mm dia complete all as specified and directed. ( Minimum Wt 210 gms). |
| 58 | Demolition of brick work or stone/boulder masonry build in cement mortar including all quoins arches pillars etc. complete all as specified and directed. |
| 59 | Demolition of Concrete of any description (unreinforced) and in any position not otherwise specifically provided for complete all as specified and directed. |
| 60 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 61 | Dismantling posts or struts steel or RCC embedded in concrete any section including taking out embeded portion and making good distrubed groung complete all as specified and directed. |
| 62 | Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in mass concrete, filling in, foundation and flooring complete all as specified and directed. |
| 63 | Stone masonry walling of random rubble, bedded and solidly hearted built in CM 1:6 brought upto courses complete all as specified and directed. |
| 64 | All as per Ser item No 62 here-in-before but except stones. |
| 65 | Brickwork with sub class B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 66 | Precast cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in bond stones walling, bed plates, anchorage blocks etc and set in CM 1:6 complete all as specified and directed. |
| 67 | Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints with max depression 20 mm as specified, of randow rubble walling, uncoursed or brought upto courses complete all as specified and directed. |
| 68 | Plain cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregates) as in bed block, coping, benching and similar work including necessary form work complete all as specified and directed. |
| 69 | Boulder filling dry, as in backfilling for retaining wall complete all as specified and directed. |
| 70 | Flush pointing to random rubble masonary, uncoarsed, in cement mortar 1:3 complete all as specified and directed. |
| 71 | S&F in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as spd and directed. |
| 72 | Plain cement concrete 1:2:4 type B-2, using 40mm graded crushed stone aggregates as in surfaces channels and drain complete all as specified and directed. |
| 73 | Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement including forms, moulds mitred/stopped ends etc. complete all as specified and directed. |
| 74 | Excavation in post holes (or similar holes) each n exc 0.5 cu.m, getting out in any type of soil returning, filling inand ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 75 | Supply Chain link MS galvanised fencing, any size or type complete all as specified and directed.. |
| 76 | Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified. |
| 77 | S & F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. |
| 78 | Mild steel round bars 10mm dia and over Gde Fe-410 W over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 79 | Mild steel screw bolts (machine made) 5 to 10mm dia of nect with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5cm long (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 80 | Mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railling; framework of water tanks and similar work conforming to Fe 290-Gde E-165 complete all as specified and directed. |
| 81 | MS framed work such as steel gates, including pintle hinges, stops, han made sliding bolts etc and similar work conforming to Fe 290-Gde E-165 complete all as specified and directed. |
| 82 | Complete removal of existing treatment, preparation of old plastered or un-plastered surfaces of wall and applying two coats of cement base paint (in any pattern and colour as directed by the Engr-in-charge) over and incl a coat of alkali resistant priming paint complete all as specified. |
| 83 | 75 mm thick PCC 1:4:8, type D2, using 40 mm graded aggregates as in sub base in floor etc, all as spd and as directed. |
| 84 | 25mm thick dry sand filing as cushioning to interlocking tiles all as specified and directed. |
| 85 | Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed. |
| 86 | Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender