Tender For Provn Of Security Wall For Near Single Offrs Accn Of 5/1 Gr Under Ge Dehradun And Provnf 21 X Desert Coller For Otm Accn Of 217 F Wksp Coy Eme Under Ge Dehradun
Tender Value
39.54 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
4 days left
EMD
79080
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Security Wall For Near Single Offrs Accn Of 5/1 Gr Under Ge Dehradun And Provnf 21 X Desert Coller For Otm Accn Of 217 F Wksp Coy Eme Under Ge Dehradun
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for foundation/ mass concrete complete all as specified and as directed. |
| 4 | Material and labour for RCC Type B-1, 1:1.5:3 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 5 | Material and labour for RCC Type B-1, 1:1.5:3 (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 6 | Material and labour for RCC Type B1 (1:1.5:3) (20 mm graded aggregate) as in Columns, pillars, piers, posts and struts |
| 7 | Supply and fixing of TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 8 | Description all as per item No 6 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 9 | Material and labour for formwork rough finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 10 | Material and labour formwork flat fair finished surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. |
| 11 | Material and labour formwork square, rectangular or ploygonal fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 12 | Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortor 1:6 complete all as specified and as directed. |
| 13 | Material and labour for rendering 15 mm thick on brick work or concrete surfaces in cement mortar (1:4) finished surfaces even and smooth complete all as specified and as directed. |
| 14 | Supply and fixing of mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivrting , etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 15 | Supply and fixing of galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc (Each line wire to be measured) complete all as specified and directed. |
| 16 | Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 17 | Material and labour for preparing of new surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and as directed. |
| 18 | Supply and fixing of 75 mm dia UPVC rain water pipe confirming to latest IS13592 (Type \\"A\\") single socketed, in any length fixed in RCC wall for weep holes complete all as specified and directed. |
| 19 | Returning filling in including spreading levelling watering and well ramming in layers not exc 25 Cm complete all as specified and as directed. |
| 20 | Removing excavated material n.exc 250 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and as directed. |
| 21 | Desert cooler electric driven (single phase), with following specification :-(a) CFM-4000 Nominal air flow with Product Category - Steel body evaporative coolers(b) Indian Standard for Evaporative Coolers- 1S:3315 (Latest)(c) Nominal cooling capacity ([Cu.M/hr]/WATT)-400/250(d) Type of Air Cooler Body - Steel Body (e) Material of Filter panel - Grill, Top of cooler body, cabinet and sump tank -ISI marked, VS-277 latest, Galvanized steel sheet with zinc coating not less than 150 gms/sqm (f) ISI marked Galvanized steel sheet thickness of Filter panel, Grill, Top of cooler body and cabinet-1.5 mm (ii) ISI marked Galvanized steel sheet thickness Sump Tank-2 mm (h) All internal surfaces painted with water resistant paint IS-9862 latest (j) Drain Plug - Brass (k) Fan Size- 450 mm (1) Blade Material - Aluminum (m) Fan Motor (ISI marked) IS: 996 latest (n) Fan Motor 4 Pole: 1450 rpm (0) Fan Motor Speeds - 3 nodes (p) Submersible Pump IS: 11951 latest (q) Typel Thickness of wood wool Pad - Honey Comb- 1 to 1.5 mm with Wire Guard for Pads (r) Water level Indicator & remote access (s) Water tank Cap- 60 Ltrs. |
| 22 | Material and labour for mild steel iron angle for fixing of desert cooler including fabrication painting chases cutting and making good surface as indicated or directed and inclusive of one primer coat, overr two coats of synthetic enamel paint complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender