Tender For special Repair To Building Number Ts-38, Ts-282, Ts-438 And Ts-512 Of 662 Army Aviation Squadron (R And O) Under Ge Nagrota
Tender Value
36.50 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
9 days left
EMD
73000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Building Number Ts-38, Ts-282, Ts-438 And Ts-512 Of 662 Army Aviation Squadron (R And O) Under Ge Nagrota
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frames with shutter (without taking off shutter from the frame) area n. exc 1.5 Sqm each complete with hold fasts etc. complete all as specified and directed. |
| 2 | Taking down chowkhat or frames with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete with hold fasts etc. complete all as specified and directed. |
| 3 | Taking down shutter of any description area exc. 1 Sqm and n. exc. 2 Sqm and removing from site, complete all as specified and directed. |
| 4 | S&F Pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 5 | S&F Pressed steel frames of size 125mm X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 6 | S & F for 35mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, without sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and directed. |
| 7 | S&F 2nd class hard wood, 40mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhats complete all as specified and directed. |
| 8 | Providing and fixing cupboard shutters made of 19 mm thick block board, finished with 1.0 mm thick decorative laminate (sunmica) on outer face and 0.8 mm laminate on inner face, including 2 mm thick PVC edge banding / hardwood lipping on all exposed edges, complete with necessary hardware fittings such as stainless steel hinges, handles, magnetic catch / tower bolt, screws, etc., fixed in position, complete in all respects as per approved design complete all as specified and directed. |
| 9 | M & L for applying two coat of synthetic enamel paint on new wooden surfaces over a coat of pink primer of any description over 10 cm width or girth complete all as specified and directed. |
| 10 | S&F 1st class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n. exc 200 cu. cm each complete all as specified and directed. |
| 11 | S & F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 12 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 13 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 14 | S & F Box type Steel windows/ventilator with double shutters (inside for wire mesh & outside for glass), including guard bar, hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as specified and directed. |
| 15 | Providing and fixing factory made UPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)(A) Area exceeding 1.00 sqm but not exceeding2.00 sqm each |
| 16 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass complete all as specified and directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 17 | S& F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 18 | S&F Solar control film 25 micron reflective type sticked to glass pane as per instructions of manufacturers complete all as specified and directed. |
| 19 | S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified and directed. |
| 20 | S&F 3.00 mm thick figured glass pin head type and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified and directed. |
| 21 | S & F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 22 | S&F Butt hinges 100mm medium weight stainless steel complete all as specified and directed. |
| 23 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 24 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 25 | S&F 150mm long aluminium handles cast type, anodised and fitted complete all as specified and directed. |
| 26 | S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller platecomplete all as specified and directed. |
| 27 | S&F for 20 to 25 mm dia stainless steel drapery curtain rod with brass /nickel chrom polish / designer lattos and brackets complete all as specified and approved by Engr-in-Charge including taking out old pelmet with curtain rods complete all as specified and directed. |
| 28 | M&L PCC 1:3:6 type C1 in hold fast etc incl all necessary formwork complete all as specified and directed. |
| 29 | Demolition of brick work, stone/boulder masonry built in cement mortar complete all as specified and directed. |
| 30 | M&L brick work with sub class B bricks straight or curved on plan exc 6m redius in CM 1 :6 complete all as specified and directed. |
| 31 | Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposingthe reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to four storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster with chicken wire mesh in cement mortar 1:4 with water proofing compound @3% by weight of cement and recron 3 S as per manufacturer instruction cleaning & removing of waste meterial etc and apply two coats of Dr fixit /pidilite/sika/Fosroc new coat ezee at interval of 8 hours cure for the surfaces complete all as specified and directed. |
| 32 | Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) reinforced complete all as specified and directed. |
| 33 | Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) unreinforced complete all as specified and directed. |
| 34 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 35 | Dismantling floor hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 36 | M&L of 25 mm thick PCC 1:2:4 type B-0 as a sub base to receive topping layer finished even and rough complete all as specified and directed. |
| 37 | M&L for machine cut kota stone slab flooring 20-25mm thick size no less than 550mmx550mm over including 15mm thick cement screed base in cm 1 :4 laid and mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 38 | M&L for machine cut kota stone 20-25mm thick in riser of steps, skirting, dado and pillar set and jointed over including 10mm thick rendering in CM 1:3 and mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 39 | M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade with providing 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 40 | M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 15mm thick CM 1:6 screed bed for laying the floor finishes complete all as specified and directed. |
| 41 | M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 10mm thick CM 1:4 screed bed for laying the floor finishes complete all as specified and directed. |
| 42 | M & L for Non-skid ceramic coloured tiles 8mm thick(square or rectangular) coloured joint free area of each tiles exc 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1 :6 complete all as specified and directed. |
| 43 | M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1 :6 complete all as specified and directed. |
| 44 | M & L for glazed coloured ceramic coloured tiles of size 350x 250x 7mm/ 450X 300X 7mm set and jointed in white or coloured cement to match on vertical surfaces such skirting ,dados, rises to steps etc over 10mm thick rendering in cement mortar in 1 :4 complete all as specified and directed. |
| 45 | M & L for PCC 1 :3:6 type C2 (75 mm thick as in plinth protection & finishing the surface even & fair W/o using extra cement complete all as specified and directed. |
| 46 | Taking down cement plaster on brick or stone walls etc. including raking out joints hacking for keys scrubbing down with water etc complete all as specified and directed. |
| 47 | M&L for rendering 15mm thick in two layer (1st layer 10mm thick and 2nd layer 5mm thick including WPC) on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished with even and smooth without using extra cement complete all as specified and directed. Note: (i) WPC will be measured and paid separately. |
| 48 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished with even and smooth without using extra cement complete all as specified and directed. |
| 49 | M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 50 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 51 | M&L for preparation of new plastered/unplastered surface and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick cement based wall care putty including necessary scaffolding for max height of G+2 bldg with parapet, etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 52 | M & L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer over a coat of 3mm thick wall care putty(in two or more coats) complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 53 | M & L for preparation of new plastered surface of ceiling and applying two coats of oil emulsion distemper over a coat of primer over a coat of 3mm thick wall care putty(in two or more coats) complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 54 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick cement based wall care putty including necessary scaffolding for max height of G+2 bldg with parapet, etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 55 | M & L for preparation of old plastered surface of wall including complete removal of existing treatment and applying two coats of oil emulsion distemper over a coat of primer over a coat of 3mm thick wall care putty(in two or more coats) complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 56 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets or Plain or corrugated steel sheeting,any gauge, thickness, in roof coverings in any position complete all as specified and directed. |
| 57 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 58 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips, valley gutter, drip and straight flashing fixed with self tapping screws complete all as specified and directed. |
| 59 | Dismantling of Ceiling Board (Fibre, Pulp, Insulation etc.) or Insulation of Boards/Slap /Blankets, any thick-ness with frame work including Cover Fillets Cornices etc. and Serviceable Ceiling Board and Cover Fillets, etc., keep in Safe Custody for re-use, complete all as specified and directed. |
| 60 | S&F 6 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed. |
| 61 | S & F Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed. |
| 62 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 63 | S & F rolled mild steel in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam,tee, angle, channel or flat sections)incl distance pieces, cleats, etc conforming to grade Fe-410W(Gde E-250 Quality A) complete all as specified and directed. |
| 64 | S & F MS work framed brackets of angles or tees with web and flanges cut to shape drilled and couter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc. n.exc 10 kg each brackets conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 65 | M&L for Preparing new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide complete all as specified and directed. |
| 66 | M&L for Preparing old steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 67 | S&F vitreous china squatting pan Orrisa pattern 580x440mm white with integral foot rest (excluding flushing cistern) fixed in repairs complete all as specified and directed. |
| 68 | S&F Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’&'P' trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc complete all as specified and directed. |
| 69 | S& F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including mild steel tube 32mm dia flush pipe complete all as specified and directed. |
| 70 | S&F in repair vitreous china wash basin flat back, size 630x450 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 71 | S&F CP soap dish made of stainless steel, fixed in position complete all as specified and directed. |
| 72 | Taking up or down 15mm bore steel tubing and connections.including cleaning for refixing or removal to store complete all as specified and directed. |
| 73 | S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed. |
| 74 | Cutting chases, pinning in, making good to facing where rerquired and poi~ting in cement mortar 1 :3 to ends or edges of landings,steps, c1lls, sunshades, shelves, lintels.etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and directed. |
| 75 | Taking up or down 20mm bore steel tubing and connections.including cleaning for refixing or removal to store complete all as specified and directed. |
| 76 | S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed. |
| 77 | S & F in repair 15mm bore Bib taps, chromium plated fancy type with crutch or butterfly handle, screwed down screwed for brass ferrule and fixed complete all as specified and directed. |
| 78 | S & F in repair 15 mm bore pillar taps fancy type cast copper alloy chrominium plated fancy typewith capstan heads, chromium plated, screwed down high pressure with or without lettered \\"Hot or Cold\\" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 79 | S&F in repair 15 mm bore Brass CP Wall/sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specifed and directed. |
| 80 | S&F in repair Cast copper alloy CP stop cock /angle Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe complete all as specified and directed. |
| 81 | S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 82 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 83 | S&F in repair Glass corner Shelf of 300mm long complete all as specified and directed. |
| 84 | S&F in repairs brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flage complete all as specified and directed. |
| 85 | S&F in Repair Shower rose brass chrominium plated 125mm size. with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 86 | S&F Iron 6 Pin Cloth Hanger Wall Mounted Door Mounted Bathroom Cloth Wall Hook, Door Hooks Rail for Hanging Keys, Ivory complete all as specified and directed. |
| 87 | Dismantling cast iron/ PVC or reinforced concrete drain pipes of 75/100/110mm bore, fixed with walls and taking out of trenches, if required complete all as specified and directed. |
| 88 | S&F PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 110mm bore complete all as specified and directed. |
| 89 | S&F PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 75 mm bore complete all as specified and directed. |
| 90 | S&F PVC (SWR) pipes single socketed in any length with rubbering joints, laid in trenches or in floors 110mm bore complete all as specified and directed. |
| 91 | S&F PVC (SWR) pipes single socketed in any length with rubbering joints, laid in trenches or in floors 75mm bore complete all as specified and directed. |
| 92 | S&F PVC (SWR) bends any radius 110mm bore with access door complete all as specified and directed. |
| 93 | S&F PVC(SWR) junction single (single 'T') equal or unequal 110mm bore with access to door ccomplete all as specified and directed. |
| 94 | S&F PVC (SWR) bends any radius 75 mm bore with access door complete all as specified and directed. |
| 95 | S&F PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore with access to door complete all as specified and directed. |
| 96 | M & L for PVC (SWR) multi floor trap diameter of outlet 75 mm with grating including jointing with solvent cement complete all as specified and directed. |
| 97 | M&L for PVC SWR gully trap 125/ 110mm, setting and jointing with solvent cement with grating including jointing to waste pipe fixed in concrete type B1 (1 :2:4) complete all as specified and directed. |
| 98 | Dismantling of water tanks and removing to store of capacity exc 250 Ltr & n. exc 500 ltr etc complete all as specified and directed. |
| 99 | S&F 500 ltr capacity Rotational moulded trippled layer polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 100 | S&F in repairs gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 101 | S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 102 | M& L Reinforced cement concrete (Nominal Mix) Type B1 1:2:4 using 20mm graded aggregate in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 103 | M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for fair finished surfaces of concrete, complete all as specified and directed. |
| 104 | M&L for Precast reinforced cement concrete 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) in landings, cover slabs (for man holes etc) and the like etc complete all as specified and directed. |
| 105 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 106 | Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 107 | Demolition of cement concrete (unreinforced) as in Roofs, floors (other than ground floors), beams, staircases, landing, chafias and similar suspended work complete all as specified and directed. |
| 108 | M&L Providing, cement concrete Type B-0 (1 :2:4) (12.5mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 109 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1 :4 complete all as specified and directed. |
| 110 | M&L for applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces complete all as specified and directed. |
| 111 | M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed. |
| 112 | M&L for One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm, reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing complete all as specified and directed.Note:- (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturer’s instructions.(ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturer’s instructions NOTE: S&F of APP based membrane of approved manufacturer will be laid/fixed by authorized person of the same manufacturer’s units as per relevant IS. |
| 113 | Demolition of cement concrete in ground floor and paving exc 15cm thickness (below & above GL) unreinforced complete all as specified and directed. |
| 114 | M&L for Cement concrete in ,sub base flooring, filling and mass concrete type D2, 1:4:8 (using 40 mm graded granite stone aggregate) complete all as specified and directed. |
| 115 | M & L for Chequered cement concrete tiles of size 30cm x 30cm x 25mm thick (with grey cement and pigments) set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:6,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, grinding complete all as specified and directed. |
| 116 | Material and labour for Factory made machine pressed precast concrete interlocking paver block any shape and size top layer with grey cement and pigment of thickness 80mm in different colour and pattern ,laid over 25mm thick dry sand and joint filled with dry sand complete all as specified and directed. |
| 117 | Material and labour Cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate) in benching ,bed plates,coping and the like including weathering, slightly rounded or chamfered angles as directed including form work and finishing all exposed surfacescomplete all as specified and directed. |
| 118 | Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit complete all as specified and directed. Please Enable Macros to View BoQ information |
| 119 | Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender