Tender For 8706 Repair To Joinery And Connected Items Including Misc Work In Technical Area At Nstl, Visakhapatnam
Tender Value
9 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
19 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 8706 Repair To Joinery And Connected Items Including Misc Work In Technical Area At Nstl, Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkats or frame exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames), all as specified. |
| 2 | Taking down Chowkats or frame not exc 1.5Sqm each with shutters (without taking off shutters from the frames), all as specified. |
| 3 | Taking down shutters of any description exc. 1Sqm and not exc. 2Sqm each, complete all as specified and directed. |
| 4 | Taking down shutters of any description n exc 1 sq. m each including easing and adjusting and refixing the shutters in same opening including renewal of unserviceable screws, etc complete all as specified and directed |
| 5 | Taking down shutters of any description exc 1 sqm but not exc 2.00 sq. m each including easing and adjusting and refixing the shutters in same opening including renewal of unserviceable screws, etc complete all as specified and directed |
| 6 | M & L for inspecting joinery and carrying out petty repairs, easing adjusting door/window/kitchen cupboard shutters, tightening screws,adjusting and refixing hinges, tower bolts, handles, aldrops, knobs, greasing of hinges, misc minor repairs exisitng mongery to make the system functional complete as directed by Engineer In Charge |
| 7 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified inSSR Part-II section -8 and directed by Engineer -In-Charge.(Make-Sintex/Rajshree wood plastic limited/Nandi/National) |
| 8 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, & S & F in the frame at site as per specification and as directed by Engineer-in-Charge. (Make-Sintex/Rajshree wood plastic limited/Nandi/National) |
| 9 | S&F MS butt hinge cold rolled medium weight 100mm size |
| 10 | S&F anodised aluminium barrel tower bolt 150mm long. |
| 11 | S&F 'D' type handle aluminium anodized 125mm in size. |
| 12 | S&F II nd class H/W plain solid straight chowkats or frames rebated on the solid, wrought, framed rounded or chamfered put together with glue pinned at joints . |
| 13 | M&L plain framed panelled shutter 35mm thick (any number of panels) with panels of timber flat or both sides or of veneered particle board mediam density wood particle board with commercial face veneerd supplied and fitted to chowkats |
| 14 | S&F flush shutters 35mm thick, solid core construction, with block board core and plywood face panel, commercial type on both sides and one face covered with deocrative face venner with lipping/frame work to mach |
| 15 | S&F MS butt hinge cold rolled medium weight 125mm size |
| 16 | S&F anodised aluminium barrel tower bolt 200mm long. |
| 17 | S&F 'D' type handle aluminium anodized 150mm in size. |
| 18 | S&F Aluminium Sliding Bolt of Size 300mm |
| 19 | M&L Two coat of synthetic enamel paint over a one coat of pink primer including preparation of new or previously untreated wooden or wood base surface of any description, not otherwise described over 10cm with or girth, complete all as specified and directed by Engineer-in-charge. |
| 20 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium frame |
| 21 | S&F in repairs 100mm size brass mortice lock, vertical type, 4 levers, including plates and two keys, fixed in repairs, including cutting holes in existing pressed steel frames, all as specified and directed. |
| 22 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed |
| 23 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame and provided & fixed with new ones complete all as specified and directed |
| 24 | S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed |
| 25 | S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in squares not exc 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed |
| 26 | S&F 50 mm micron reflective type sun control film sticked to glass panes as per manufacturer's instructions all as specified and as directed including taking down old. |
| 27 | S&F in Repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 28 | S&F in repairs anodised aluminium barrel tower bolt 150mm long. |
| 29 | S&F in repairs Aluminium Sliding Bolt of Size 200mm |
| 30 | S&F in repairs anodised aluminium barrel tower bolt 200mm long. |
| 31 | S&F in repairs 'D' type handle aluminium anodized 150mm in size. |
| 32 | S&F in repairs Aluminium Sliding Bolt of Size 300mm |
| 33 | S&F in repairs anodised aluminium barrel tower bolt 125mm long. |
| 34 | S&F in repairs for18mm thick Veneered particle boards interior grade, solid core, general purposes type, with face veneers of type 'BB', fixed with screws to timber frame work with decorative veneer on one face |
| 35 | M&L Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete in cm 1:6 |
| 36 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or iveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Hold fasts similar work con- forming to Fe.290.Gde-E-165 |
| 37 | M&L for Preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 38 | S&F Door closer, of aluminium (die cast) body, hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight upto 60kg, fixed in repairs all as specified and directed |
| 39 | S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 40 | S & F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified. |
| 41 | Supply and fixing factory made uPVC white colour Two track two panels sliding window upto 1.50 m height made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather= proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender