Tender For Repair To Brick Work, Plastering, Periodical Services And Other Misc Repairs In repair renovation Units At Arnora And Thalela Area Of 09 Sect Under Age (I) Bhalra (Nit No. 50 Of 2026-27)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Aug 2026
10 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagrota → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Brick Work, Plastering, Periodical Services And Other Misc Repairs In repair renovation Units At Arnora And Thalela Area Of 09 Sect Under Age (I) Bhalra (Nit No. 50 Of 2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed. |
| 2 | M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | Excepet Bricks work with old size bricks, using old serviceable bricks, as retrieved from dismantling of brick work under respective item, after removing mortar from and cleaning bricks; straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 4 | Taking down cement plaster any description on brick or stone wall/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 5 | Rendering 10 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified and directed by Engr-in-charge. |
| 6 | Rendering 15 mm thick on fair faces of brick work/stone wall or concrete surfaces,other than fair face finished even & smooth (without using extra cement) on walls in cement mortar (1:4), including mixing of liquid water proofing admixture as per manufacturer's instructions complete all as specified and directed by Engr-in-charge.Note: Supply only liquid water proofing admixture shall be measured and paid seperately under relevant item of this BOQ |
| 7 | Supply only liquid water proofing admixture @ 0.20 litre per bag of cement complete all as specified and directed by Engr-in-charge. |
| 8 | Material and Labour for preparation of New plastered surface applying Two coat of white wash/ colour wash on walls / CEILING complete all as specified and directed by Engineer-in-charge. |
| 9 | Material and Labour for preparation of old decorated plastered or un plastered surface including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots, removal of vegetation and applying one coat of white wash on WALL/ceilings complete all as specified and directed by Engineer-in-charge. |
| 10 | Preparation of newly plastered surfaces two Coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a complete all as specified and directed by Engr-in-charge. |
| 11 | Complete removal of exisiting treatment and applying two Coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed by Engr-in-charge. |
| 12 | Preparation of newly plastered surfaces two Coats overFinishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specifiedand directed by Engg-in Charge. |
| 13 | Complete removal of exisiting treatment old surface with complet removal overFinishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specifiedand directed by Engg-in Charge. |
| 14 | Preparation of old surfaces of walls by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and applying one coat of distempering with oil emulsion distemper white or any tinted on walls, normal or camoufage pattern filling gaps by putty after washing rubbing down and stopping of distermpered surfaces, complete all as specified and directed by Engr-in-charge. |
| 15 | Material and Labour for preparation of old decorated plastered or un plastered surfaces including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots, removal of vegetation and applying one coat of cement base paint of approved shade complete all as specified and directed by Engineer-in-charge. |
| 16 | Preparation of old/previously decorated unplastered or plastered surfaces of fair & smooth of wall/ceiling/roof and Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high with one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge. |
| 17 | Material and Labour for preparation of old painted surfaces of steel of any description exceeding 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint of approved shade complete all as specified and directed by Engineer-in-charge. |
| 18 | Material and Labour for preparation of old painted wood and wood based surfaces of any description not otherwise described over/exceeding 10cm width or girth and applying one coat of synthetic enamel paint on wooden surface of approved shade complete all as specified and directed by Engineer-in-charge. |
| 19 | Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed. |
| 20 | S&F, Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed. |
| 21 | S&F Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed. |
| 22 | Taking down wooden shutter of any dscription exc 1.00 Square metre but n. exc 2.00 Square metre ,easing and adjusting and than refixing shutters with old builder hardware as required in the same opening complete all as specifed & directed. |
| 23 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. |
| 24 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 25 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 26 | S&F In repair pressed steel doors frames of size 105x60 with one or more rebates icluding necessary fixing lugs, hinges, lock stricke plate etc,complete,as specified and directed by engr in charge. |
| 27 | S&F In repair pressed steel doors frames of size 125x60 with one or more rebates icluding necessary fixing lugs, hinges, lock stricke plate etc,complete,as specified and directed by engr in charge. |
| 28 | S&F for factory made 35mm thick 2nd class hard wood Plain, framed, panelled shutters, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treatedmedium density, wood particle board with commercial face veneers fitted to chowkhat complete all as specified and as directed by Engineer-in-Charge. |
| 29 | S&F for factory made 35mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass/gauge etc divided into squares, with plain , chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of door shutters as specified in SSR Part-I sec 8 clause 8.20 (a), fixed to chowkhat all as specified and as directed by Engineer-in-Charge. |
| 30 | S&F flush shutters, solid core construction 30mm thick with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 31 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 32 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 33 | S&F 150 mm long Aluminium anodised,handle of extruded section cast type anodised and fixed complete all as specified and directed. |
| 34 | S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 35 | S&F 250 mm long Aluminium alloy ,anodised sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixed bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 36 | S&F butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, complete all as specified and directed. |
| 37 | Supply & Fix 100 mm long Butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed. |
| 38 | M&L for preparation of new decorated wooden surfaces over a coat pink primer over two coats of synthick enamil paint of any description, not otherwise described over 10 cm width or girth Complete all as specified and as directed. |
| 39 | S&F for aluminium die cast body door closed hydraulically regulated designation No. 2 universal type (ISI Make) suitable for door shutters of weight between 36 to 60 Kg fixed in repair complete all as specified and directed. |
| 40 | Taking down aluminium (frame with or without shutter) exc 1Sqm But n-exc 2Sqm |
| 41 | S&F aluminium powder coated sliding windows with three sliding pane , two of glass and one of wiremesh , shutter glazing with and including 4 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips, frame, with duco pattern grill of size 75mm x75mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slides including making good of wall surfaces to match with existing surfaces complete all as specified and as directed. |
| 42 | S&F alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed :-(a) Frame 65x38x1.60mm thick with rawl plug(b) Middle and lock rail : 150x44x1.6mm thick(c) Bottom rail : 150x44x1.6mm thick(d) Top rail/sype : 85x44x1.6mm thick(e) Aluminium beading : 0.7mm thick(f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper, hydraulically regulated door closer ( Make Sandhu ISI marked or ites equivalent approved make)(g) Making good of wall surface to match with existing surface complete. |
| 43 | Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for, complete all as specified and as directed. |
| 44 | S&F framed work any shape nad any designed required by user such as grills, gratings, etc.. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. |
| 45 | Dismantling water tanks of capacity 1000 Ltrs and removing to store complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply and fixing for Rotational moulded polyethelene water storage tanks of capacity 1000 Ltrs (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge. |
| 47 | Dismantling water tanks of capacity exc 250 & n exc 500 Ltrs and removing to store complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F for Rotational moulded polyethelene water storage tanks of capacity 500 Ltrs (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge. |
| 49 | Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified. |
| 50 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed . |
| 51 | M&L for vitrified coloured ceramic tiles, light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed . |
| 52 | M&L for glazed coloured ceramic tiles in vertical surface 350x250x7 mm/450x350x7mm thick, set & jointed in neat cement slurry & pointed in coloured cement to match the tile over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender