Tender For Repairs To Joinery, False Ceiling, Cleaning Of Service Water Tanks At Hansa Vihar South Side Of Hansa Technical Area, Nfts 552, Aircats And Atc, Nay (Goa), North Side Of Hansa Technical Area, Raqas, Nasdo, Nts (Goa), Cartalim, Ndb And Cave
Tender Value
45 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
15 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Joinery, False Ceiling, Cleaning Of Service Water Tanks At Hansa Vihar South Side Of Hansa Technical Area, Nfts 552, Aircats And Atc, Nay (Goa), North Side Of Hansa Technical Area, Raqas, Nasdo, Nts (Goa), Cartalim, Ndb And Cavellosim Under Ge (Nw) Vasco. (Tender Id No. 2026_Mes_781777_1)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 3 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 4 | Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Soft/ disintegrated rock and removing surplus soil to a distance n.exc 50m & making good surface |
| 5 | Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete. |
| 6 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 7 | S&F PVC Rain Water Pipe 200 mm dia including all fittings, head , shoes, branches all as specified fixed in wall including joint with PVC adhesive |
| 8 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls. |
| 9 | S & F 110 mm bore PVC (SWR) Bends |
| 10 | Dismantling mild steel work of any description not otherwise provided for |
| 11 | S & F Mild steel roof trusses (framed), Trussesd, purlins, crane grantries, rails and framings and heavy bracket framing (Beam,tee, angle, channel or flat sections) confrming to Fe 410-W including cleats,distance pieces etc |
| 12 | Dismantling Wall and ceiling boards/ wall lining (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/paneling, any thickness, including cover fillets |
| 13 | S&F for Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet including of solvent cement and fixing at site on PVC frame as per specifications and drawing |
| 14 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 15 | Taking down ceiling board/tiles from aluminium snap grid frame work and refixing the same in the same position after necessary tightening the sagging portion, replacement of the ceiling board, Main Tees, cross Tees, angles, suspending if required, including bolts, necessary washer,nut/clits/pin hook etc for securing frame work to ceiling to the snap grid all as directed by Engineer in Charge. |
| 16 | S&F for 12mm thick Perforated particle board/ ANF board/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid fixed (Note: Aluminium grid shall be measured seperately under relevant item of this Schedule.) |
| 17 | S&F Anodised aluminium snap grid frame work for false ceiling including necessary fitting all as specified |
| 18 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) |
| 19 | Taking down chowkat or frames exc 1.5 sqm but n. exc 4 sqm each (w/o taking off shutters from the frame ) complete all as specified and directed. |
| 20 | Taking down shutters of any description n. exc. 1 sqm each complete all as specified and directed. |
| 21 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm complete all as specified and directed. |
| 22 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system.CONTD TO 22.01 |
| 23 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories including (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) Area not exceeding 2.00 sqm each |
| 24 | Supply and fixing factory made uPVC white colour fixed glazed window/ ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ±0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100x8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etcCONTD TO 23.01 |
| 25 | After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 26 | M & L for Solid (125mm x 65 mm Double Rebate) Factory made 100% solid WPC Door frame made from 100% LEAD FREE (Single extruded process) material with density 780kg / Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by the Engr-in-Charge. The door frame should be water proof, Termite proof, Fire retardant and having excellent screw holding capacity and shall be fixed with 6 Nos 150mm long hole fasterners complete all as specified and directed.Make Rajshree Plastiwood, Kumar Arch TechPvt Ltd, Archid Ply, Floresta |
| 27 | M & L for Solid (100 mm x 65 mm single rebate) factory made 100% solid WPC brown door frame made from 100% LEAD FREE (Single extruded process) material with density 780 kg / Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by the Engr-in- Charge. The door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity and shall be fixed with 6 Nos 150mm long hole fasterners complete all as specified and directed. Make Rajshree Plastiwood, Kumar Arch TechPvt Ltd, Archid Ply, Floresta |
| 28 | M & L for 30 MM thick moulded plain WPC solid door shutter: Providing (30mm thick) MOLDED WPC Brown factory made 100% solid door (Conforming As per IS: 4020) made from 100% LEAD FREE single extruded with 2, 4 or 6 raised panel design on the front side with 10mm deep mould on single side with wood grain texture and back side plain with density not less than 600kg/ Cum. Manufactured by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity. complete all as specified and directedMake Raj Shree Plasti wood / Sintex / Floresta / Kumar arch Tech Ltd |
| 29 | S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 30 | S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 31 | S&F Veneered decorative plywood 4mm thick, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work. |
| 32 | S&F Powder coated aluminium grill of design DG-104 pattern, made out of 10mm dia rod fixed with and including standed aluminium frame of 'F' section of size 23.4x15.3x1.4 mm thick all as per manufacturer's instructions complete all as specified and directed |
| 33 | Forming jambs etc to openings incl cuttings toothings and bondings into old work incl facing and pointing to match existing work complete in CM 1:4 |
| 34 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and as directed. |
| 35 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with head moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rain & bottom rail paneling of plain gap insert for top rail & bottom rail paneling of plain color PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement all as specified. |
| 36 | All as per above item no 33 but wire guazed i.e, panel will be of wire guaze in lieu of wood grain printed PVC sheet panel. The wire shall be wrapped on additional square 8mm M.S Sloid tube and this tube shall be welded to M.S tubes.The wire guage shall be stretchd to tighten firmly. |
| 37 | M&L for PCC (1:2:4) type B1 using 20 mm graded aggregate as in bed block/hold fast blocks,benching and coping etc with & including necessary form work for fair faces of concrete, complete all as specified and directed. |
| 38 | S & F 12 mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cupboard shutters, partitions, shelves, pelmet boxes or narrow widths and similar work. |
| 39 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section |
| 40 | S&F butt hinges medium weight stainless steel 100 mm size |
| 41 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 42 | S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised. |
| 43 | Aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 44 | Aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs |
| 45 | S & F in repairs of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 140 mm |
| 46 | S & F Stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 47 | S&F in repairs Stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 48 | S & F 25 mm dia., Aluminium alloy anodised fency curtain rails with brackets fixed in repair |
| 49 | M&L for Painting of old wodden surfaces preparation,aluminium priming and synthetic enamel paint coats Surfaces of any description not other wise described over 10cm width or grith |
| 50 | S&F 5.5 mm thick sheetglass ordinary quality exceeding 0.5 sqm each pane |
| 51 | S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 52 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 53 | M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections/hardstanding, finished even and smooth w/o using extra cement |
| 54 | Dismantling of stone slabs and tiles of any description or thickness in floors/dado etc laid bedded and pointed in any mortar |
| 55 | M & L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) including screed bed motar of 20 mm (1:6)using marble dust with admixture of pigment to match with shade of granite. 20mm thick |
| 56 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises |
| 57 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors laid over & incl 15 mm thick screed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete as directed by Engineer-in-Charge. |
| 58 | All as per item No. 55 but as in skirting/dado but over 10 mm thick rendering over CM 1:4 |
| 59 | Dismantaling water tanks and removing to store exc 500 but n. exc 1000 ltrs |
| 60 | Dismantaling water tanks and removing to store exc 250 and n.exc 500 ltrs |
| 61 | S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 500 Ltrs capacity hoisted and fixed in position incl 20mm bore PVC float valve all as specified and directed in SSR Pt I |
| 62 | S&F rotational moulded polyethylene water storage tanks (cylinderical, vertical with closed top) of 1000 Ltrs capacity hoisted and fixed in position incl 20mm bore PVC float valve all as specified and directed in SSR Pt I |
| 63 | Demolition of stone /boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 64 | Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in CM 1:6 , type C1 1:3:6 using 20mm graded crushed stone aggregate complete all as specified and directed. |
| 65 | Taking down cement plastering at any description on brick or stone wall etc including raking out joints hacking for key scrubbing down with water etc and removal of debries and depositing where directed. |
| 66 | M&L for rendering 5 mm thick in CM 1:3 in ceiling finished even and smooth (without using extra cement) |
| 67 | M&L for preparation on newly plastered surface of ceiling for painting and applying 3 mm thick wall care putty on plastered surfaces and applying two coat of oil bound distemper 0ver alkali restance primer. |
| 68 | M&L for Rendering 15 mm thick cement plaster on concrete solid block walls in two coats first coat of 10 mm in CM 1:4 & 2nd coat of 5mm in CM 1:4 mixed with integral water proofing compound finished to even & smooth w/o using extra cement. Note :- Integral water proofing liquid will be measured and paid seperately. |
| 69 | Supply only water proofing compound |
| 70 | M/L for preparation of new surface of wall plastered including cornices and pillasters etc and applying two coat of cement base paint on wall all as specified and as directed by Engr-in-Charge. |
| 71 | M&L for rendering 15 mm thick in CM 1:6 on concrete solid block wall surface finished even and smooth without using extra cement. |
| 72 | M&L for preparation on newly plastered surface of wall for painting and applying 3 mm thick wall care putty on plastered wall surfaces and applying two coat of oil bound distemper over alkali resitance primer. |
| 73 | M&L for preparation of steel surface and applying one coat of red oxide zinc chrome primer and two coats of Epoxy anticorrosive paint over 10 cm width or girth. |
| 74 | Cleaning of storage water tank of PVC/HDPE of 500 Ltrs capacity staged over RCC roof/floor slab or similar place inside /outside buildings by removing float valves carefully, thoroughly cleaning the walls, floor and ceiling of the tanks, mouths of pipes etc., removing the dirty water, sludge and other depositions to a distance not exceeding 50 metres as directed by Engineer-in-charge and removing remaining sludge/dirty water to make the tank totally dirt free and finally cleaning the water tank with fresh water till water becomes clear to the entire satisfaction of Engineer-in-charge and as specified in particular specifications and refixing of float valves all as specified and directed by Engineer-in –Charge |
| 75 | All as per above item in before but water tank of capacity 1000 ltrs |
| 76 | All as per above item in before but water tank of capacity 2000 ltrs |
| 77 | Cleaning of storage water tank of RCC/AC of 1000 Ltrs capacity staged over RCC roof/floor slab or similar place inside /outside buildings by removing float valves carefully, thoroughly cleaning the walls, floor and ceiling of the tanks, mouths of pipes etc., removing the dirty water, sludge and other depositions to a distance not exceeding 50 metres as directed by Engineer-in-charge and removing remaining sludge/dirty water to make the tank totally dirt free and finally cleaning the water tank with fresh water till water becomes clear to the entire satisfaction of Engineer-in-charge and as specified in particular specifications and refixing of float valves all as specified and directed by Engineer-in –Charge |
| 78 | All as per above item in above but water tank of capacity 2000 ltrs |
| 79 | Writing letters “TANK CLEANED ON DD MM YYYY” of not exceeding 7.5cm high each letter, painted with black letters on sufficient white back ground on external visible face of water tank with synthetic enamel paint complete all as specified and as directed.Note:- Complete letters on each tank will be measured as one unit. |
| 80 | S & F in repairs Ball brass valves 20mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed. |
| 81 | Dismantling old particle boards/plywood as in shelves boarding, any description, fixed in any position with nails |
| 82 | S/F 18 mm thick single side prelaminated woodgrain solid PVC sheet suitablely fixed in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work with all fittings as per direction and specifications. |
| 83 | M&L for surface preparation including demolition by mechanical means to remove all loose particles, laitance, oil and grease etc and treating and finishing the sunken portion of water closet area by sealing the edges of holes through which sanitary pipes are entering the sunken portion, using seal tape and grout the gaps using a non-shrink cementitious grout (Dr Fixit Pidicrete URP or equivalent of Fosroc/STP/Krishna Conchem), providing 10mm thick rendering in cement mortar 1:3 with and including water proofing compound. Apply first coat of WPC (cementitious product with acrylic emulsion polymer as binder using Dr. Fixit Pidifin 2K of Pidilite Industries or equivalent of Fosroc/Krishna Conchem Products) in the sunken portion. Immediately cover all the angle fillets with a 150mm wide strip of open woven glass fiber mesh of 2mmX2mm. CONTD TO 81.01 |
| 84 | Apply the second coat of WPC after the first coat dries completely and allow it to dry completely, providing necessary connection items suitable for water closet and providing lime concrete complete all as per manufacturer instruction and as directed by Engineer-in-Charge. |
| 85 | M &L for Plain Cement Concrete Type E2 1:5:10 for filling in sunken floor |
| 86 | M/L for PCC 1:3:6 type C-2, 75 mm thick padding to required slop in sunken finshed even and smooth without using extra cement |
| 87 | S & F 50 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sq. Cm., fixed complete to walls, ceilings or in floors etc. |
| 88 | Forming Construction joint 30mm deep x 10mm wide filled with sealing compound |
| 89 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender