Tender For Blancoing Of Paved Area In Cpg And Flag Area, Certain Maintenance And Petty Repair Works For Tsc, Cleaning/ Jetting To Sewage Lines, Manholes, Septic Tanks And Soakage Well And Roof Paintiong To 10 X Pota Shelter At Dgncc Under Ge (East) D
Tender Value
29.72 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
7 days left
EMD
59440
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Blancoing Of Paved Area In Cpg And Flag Area, Certain Maintenance And Petty Repair Works For Tsc, Cleaning/ Jetting To Sewage Lines, Manholes, Septic Tanks And Soakage Well And Roof Paintiong To 10 X Pota Shelter At Dgncc Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | M & L for preparation of old existing pathway/road/hardstanding areas duly mechanical brooming/scraping down to remove all loose dirt including removing the vegetable/glass over it further applying evenly one coat of road marking thinable paint (bituminous) of Z black colour (bituminous thinable paint mixed with water at the ratio of 1:10 to 1:20) as directed and approved by Engr-in-Charge complete all as specified and as directed. Make- Oreint Airport System /Simran Industries or equivalent. |
| 2 | M & L for preparation of black top surfaces of road by cleaning with air blower and applying 1.5mm thick road marking strips, dashes, arrows letters etc 10cm wide or more (retro-reflective) of white or golden yellow shade/colour using hot thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and driven by experienced operator on road surface including cleaning all loose dirt, seals, oil greases and foreign materials etc complete all as directed. (Make : Asian Paints/APCO or equivalent). |
| 3 | M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radius built in CM 1:6 including demolition of Brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified. |
| 4 | Taking down cement or cement lime plaster, any description on brick or stone walls or concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 5 | M&L for ready mixed plaster, 15 mm thick on fair faces of brick work or concrete surfaces using ready mixed cement mortar suitable for external surface as per manufacture instructions and finished even and fair complete all as specified and directed. (Make -Ultratech/ Birla cement/ JSW cement) |
| 6 | M&L for ready mixed plaster, 15 mm thick on fair faces of brick work or concrete surfaces using ready mixed cement mortar suitable for internal surface as per manufacture instruction and finished even and fair complete all as specified and directed. (Make -Ultratech, Birla cement, JSW cement) |
| 7 | M & L Rendering 5 mm thick on fair faces of concrete or concrete surface in ceiling in CM 1:3, finished even and fair complete all as specified and directed and directed. |
| 8 | M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. Make: BERGER (WEATHER COAT LONG LIFE 10)/ ASIAN PAINTS (APEX ULTIMA)/ NEROLAC (EXCEL MICA MARBLE) |
| 9 | M & L for Preparation of newly plastered /unplastered surfaces of walls and ceilings and applying Two coats of Oil Bound Distemper on wall surfaces over a coat of interior primer and putty complete all as specified and directed. |
| 10 | S & F in repair 150mm size aluminium anodised handles complete all as specified and directed. |
| 11 | S & F in repair 250 mm long stainless steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed . |
| 12 | S & F in repair aluminium anodised 150mm size barrel tower bolt complete all as specified and as directed. |
| 13 | S&F in repair 75mm floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece complete all as specified and directed. |
| 14 | S&F in repair Aluminium dia cast Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 15 | S & F 3mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed including hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and directed |
| 16 | S & F 5.5mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed including hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and directed |
| 17 | S&F 0.05mm thick and 0.91m wide non-metallized nano-technology self adhesive sun control film with high clarity while rejecting up to 97% of infrared light suitable for window and door (Make : 3M/ Ultrashield) |
| 18 | S&F in repair 75mm long stainless steel butt hinges, medium weight complete all as specified and directed. |
| 19 | S&F in repair 900mm wide stainless steel wire cloth having 27SWG wire with apurture less than 2.00mm complete all as specified and directed. |
| 20 | S&F in repair 10 to 25mm thick and 35mm wide teak wood wooden beading in curved shape suitable for fixing of wire mesh complete all as specified and directed. |
| 21 | S&F in repair Vitreous china Europian wash down water closet floor mounted EWC (white/ ivory/off white) closed pattern incl all necessary accessories like rag bolts/ gel gasket/seat cover etc.complete in all respect all as specified and directed. |
| 22 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including connection to trap,and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete in all respect all as specified and directed. |
| 23 | S&F in repair Vitreous china single Piece floor mounted WC With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x730x740 mm, S Trap- 300 mm with all fitting and fixture complete all as specified and directed. Make : Jaquar / Marc / Kohler ) |
| 24 | S&F in repair Polyethylene syphon kit assembly for one piece EWC for flushing cistern, complete all as specified and directed. |
| 25 | S&F in repair Plastic water closet seat cover for EWC, closed pattern with recessed bottom, white or ivory colour and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 26 | S&F in repair white colour vitreous china urinal, full stall type, with waste coupling and waste pipe, complete all as specified and directed.(Make : Cera/ Hindustan/ Hindware) |
| 27 | S&F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed. |
| 28 | S & F in repair Stainless steel Grating dome 100/ 125mm dia with or without hole for waste pipe complete all as specified and as directed. |
| 29 | S & F in repair 15mm bore angle valve of CP brass high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and as directed. (Make: Jaquar/Marc/Kohler) |
| 30 | S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.(Make: Jaquar/Marc/Kohler) |
| 31 | S & F in repair Toilet paper holder of stainless steel fixed to walls with chromium plated (CP) brass screws |
| 32 | S & F in repair Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed. |
| 33 | S & F in repair Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shank and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete. |
| 34 | S & F in repair Brass CP sink mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shank and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete. |
| 35 | S&F in repair 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specified and directed. (Make: Jaquar/ Marc/ Kohler) |
| 36 | S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe complete all as specified and directed. |
| 37 | S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe complete all as specified and directed. |
| 38 | S&F in repairs of CP towel rail 'D' Type 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified. (Make: Jaquar/ Marc/ Kohler) |
| 39 | S & F in repairs Towel rack of size 600mm x 350mm cast copper alloy chromium plated all as specified and directed. (Make: Jaquar/Marc/Kohler) |
| 40 | S & F in repairs Chromium plated towel ring including all fittings for fixing complete all as specified and directed. (Make: Jaquar/Marc/Kohler) |
| 41 | S & F in repairs chromium plated soap Dish, complete all as specified and directed (MAKE : JAQUAR/MARC/KOHLER). |
| 42 | S & F in repairs CP Angle cock (Two-in- one) any colour high pressure screwed for iron pipe 15mm bore and fixed complete all as specified and as directed. |
| 43 | S&F in repairs CP Health Faucet with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified |
| 44 | S & F in repairs internal fittings of brass, suitable for chromium plated wall mixer of any type all as specified and directed. (Make: Jaquar/Marc/Kohler) |
| 45 | S&F in repairs 125mm dia brass chromium plated shower rose with 600mm long shower arm, fancy type suitable for 15mm bore GI pipe all as specified and directed. (Make: Jaquar/ Marc/ Kohler) |
| 46 | S&F in repairs 75mm dia brass PTMT shower rose with neck and swivel joints fancy type including shower arm 195mm long, suitable for 15mm bore GI pipe all as specified and directed. (Make: Prayag or equivalent). |
| 47 | S&F in repair 10 Ltrs capacity PVC valve less symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed |
| 48 | S & F in repair flushing cistern kit (internal kit) for PVC flusing cistern any type complete all as specified and directed |
| 49 | S & F in repair flushing cistern handle complete all as specified and directed |
| 50 | S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 51 | S & F in repair 32mm spring type PVC waste pipe fixed to WHB and sink (Note minimum length of each pipe should not be less than 0.80RM), complete all as specified and as directed. |
| 52 | S & F in repairs angle cock of PTMT any colour high pressure screwed for iron pipe 15mm bore and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed. (Make : Prayag/Prince/polytuff) |
| 53 | S & F in repairs15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm- 125gms), complete all as specified and as directed. (Make: Prayag/ Symet/ Prince/ Polytuf) |
| 54 | S&F in repairs 15mm PTMT Pillar taps any colour high pressure screwed for iron pipe (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 55 | S&F in repairs PVC flush pipe (L- Band pipe) suitable for PVC flusing cistern complete all as specified and directed. |
| 56 | S & F in repair chromium plated jet spray suitable for fixing to 15mm dia GI pipe with 1.00 mtr long pipe, complete all as specified and directed . Make :- Kohler / Jaguar /Marc |
| 57 | S & F in repairs glass corner shelf consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. (Make: Jaquar/Marc/Kohler) |
| 58 | S & F in repairs glass shelf consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. (Make: Jaquar/Marc/Kohler) |
| 59 | S&F in repairs 32mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed. |
| 60 | S&F in repairs 40mm size waste fitting (coupling) brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed. |
| 61 | S & F in repair 15mm galvanised iron medium grade fittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed. |
| 62 | S & F in repair 20mm galvanised iron medium grade fittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed. |
| 63 | S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed. |
| 64 | Descritpion all as item no 63.00 above but 20mm, complete all as specified and directed. |
| 65 | S & F Rotational moulded polyethylene water storage tanks (ISI Marked) 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete. |
| 66 | S & F Rotational moulded polyethylene water storage tanks (ISI Marked) 2000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete. |
| 67 | S & F Rotational moulded polyethylene water storage tanks (ISI Marked) 5000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including tank nipple, 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete. |
| 68 | S & F Rotational moulded polyethylene water storage tanks (ISI Marked) 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including tank nipple, 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete. |
| 69 | S & F in repair galvanised, ISI marked tank nipple suitable for 15mm bore pipe, complete all as specified and directed |
| 70 | S & F in repair galvanised, ISI marked tank nipple suitable for 20mm bore pipe, complete all as specified and directed |
| 71 | S & F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed |
| 72 | S & F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed |
| 73 | S & F 15mm outer dia CPVC pipes ISI marked on walls/ceiling or laying in floors including taking up or down GI tubing 20mm bore and connections complete all as specified and directed. |
| 74 | S & F in repair 15 mm CPVC fittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, double nipple etc (ISI marked) complete all as specified and directed. |
| 75 | Cleaning old sewage lines any Dia and cleaning of sludge with water from soakage well with mechanically operated 25 tonne truck mounted de-sludger with 12000 litre capacity tanker having water fitted high pressure Jet machine for cleaning and sludging of sewage line, sockage well, septic tank etc, and deploying 2 sweeper along with machine shall be used by the contactor at per schedule program in written and completion of each job to the entire satisfaction of Engineer-in- charge as instructed. Note :- (a) In case contractor fails to deploy the machine as per program a damage of Rs 5000/- per day shall be deducted from this payment. (b) Per day means 8 working hours in a day excluding standby period due to any reason. |
| 76 | S&F in repair 60mm thick manhole/ drain covers conforming to IS-12592 (2002) of size 0.40 to 0.81 sqm with and including MS flat frame, factory made, ISI marked including fixing complete to match the road/ floor surface complete including removal of old damanged cover all as specified and directed. |
| 77 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for. |
| 78 | M&L for RCC (1:1½:3) Type A-1 using 20mm graded stone slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer -in- charge. |
| 79 | M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer -in- charge. |
| 80 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),complete all as specified and directed by engineer -in- charge. |
| 81 | M&l for cleaning and removal of old dabries from roof and preparation of old painted corrugated or uncorregated steel or iron surface of any description over 10 cm width or girth by steel brush and applying two coats of synthetic enamel paint over a coat of red oxide primer including tighting of loose steel bolts complete all specified and directed. Note :- Cost of all requsit scaffolding, ladders and safety gears required for execution of work deemed to be included in the quotated rate of item. |
| 82 | Disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading and disposal at an approved Municipal dumping ground outside Defence land (MoD land), for all leads and all lifts, complete all as specified and as directed by the Engineer-in-Charge.Notes:1. Photographic Evidence: The contractor shall submit clear photographic evidence in support of disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials, indicating the condition of the site before loading, during transportation and after unloading at the approved Municipal dumping ground. The photographs shall preferably be geo-tagged and date-stamped and shall form part of the record for verification and payment purposes. 2. Certification by Engineer-in-Charge: Completion of whole work in this BOQ shall be deemed to have been achieved only after certification by the Engineer-in-Charge that no building rubbish/malba, similar unserviceable, dismantled or waste materials have been left at the site and that the site has been thoroughly cleared and cleaned to his satisfaction. 3. Each load shall comprise a minimum carrying capacity of 5.00 cubic metres (Cum). Payment under this item shall be made on a per-load basis for loads conforming to the above minimum capacity and duly verified by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender