Tender For Maintenance And Repair To Buildings Of Dgncc (During Rdp C ) Under Ge (East) Delhi Cantt-10
Tender Value
43.33 Lakhs
Estimated cost
Bid Submission
22 Aug 2026
7 days left
EMD
86680
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance And Repair To Buildings Of Dgncc (During Rdp C ) Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) including iron mangory not exc. 1.5 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) including iron mangory exc. 1.5 sqm but not exc 4 sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed. |
| 4 | S&F in repairs 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms), fancy type, complete all as specified and directed. (Make: Prayag/ Symet/ Prince/ Polytuf) |
| 5 | S & F in repairs Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm- 125gms), complete all as specified and directed. (Make: Prayag/ Symet/ Prince/ Polytuf) |
| 6 | S & F in repairs angle cock of PTMT any colour high pressure screwed for iron pipe 15mm bore and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed. (Make: Prayag/ Symet/ Prince/ Polytuf) |
| 7 | S & F in repair 15mm galvanised iron medium grade short fittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, tank nipple etc (ISI marked) complete all as specified and directed. |
| 8 | S & F in repair 20mm galvanised iron medium grade short fittings such as Socket, Elbow, Nipple, Tee, Tee Reducer, Elbow Reducer, Union, tank nipple etc (ISI marked) complete all as specified and directed. |
| 9 | S & F in repair 75 /110 mm dia PVC floor trap , with grating including jointing to waste pipe with solvent fixed in cement concrete type B1 (1:2:4),complete all as specified and directed. |
| 10 | S & F in repair 75 mm dia PVC muilty floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4),complete all as specified and directed. |
| 11 | S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 12 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including 3 Nos stainless steel butt hinges of size 75mm, 2 Nos 150mm long stainless steel tower bolt, 2nos SS Handle 150mm long supplying & fixing in the frame at site as per specification & drawing. |
| 13 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete as per direction of Engineer-in-Charge. |
| 14 | Description all as per item no 13.00 above but frame of size 45 x 70MM |
| 15 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including 3 Nos stainless steel butt hinges of size 100mm, 2Nos 150mm long stainless steel tower bolt, 2Nos SS Handle 150mm long and 01 No 250mm long sliding bolt of all as per direction of Engineer-In-Charge. Make 'Rajshree or equivalent\\" |
| 16 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid wire mesh door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including SS Wire cloth 0.40mm nominal dia of wire and average width of aperture 1.00mm 3 Nos stainless steel butt hinges of size 100mm, 2Nos 150mm long stainless steel tower bolt, 2Nos SS Handle, 150mm long and 01 No 250mm long sliding bolt of all as per direction of Engineer-In-Charge. Make 'Rajshree or equivalent \\" |
| 17 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 18 | S & F framed work such as in door frame, door shutters / gate of angel, Flat iron or other section with MS sheet, cladding, gusset plates, rails, braces, hold fast etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, including hinges hold fast of Fe 410-W (Gde E-250 quality) etc. complete all as specified and directed. |
| 19 | S & F Mild steel, plain, black sheet 1.00mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 20 | S & F for Factory made UPVC (white/Off white colour sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (+0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one vertical length in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, +0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selected quality glass, Aluminium track on bottom rail to be of there track sliding frame, wool pine for sliding sash and interlock, complete all as specified and directed. (Area exceeding 2.00 Sqm). (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 21 | S & F for Factory made UPVC (white/Off White colour casement (Openable) Door with glazed shutter made of extruded profile members with wall thickness of 2.3mm (+0.2mm). door profile members with hollow section with multi chamber. Frame (60mm x 58mm), sash bars (60min x 104mm). T-profile (One vertical length in between two shutters 60mmx 74mm). Glazing head (35mmx 20mm) will be mitered cut and fusion welded at all corners, including making of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware EPDM gasket 1.2 +0.2mm thick galvanised steel frame (28mmx21.50mm), sash bars (31mmx27mm). T-profile (27x17mm) to be inserted in required profile frame and will be fixed to wall 8mm x 100mm long fasteners. Hardware: casement door handle both side with Cylinder made of zinc alloy (white powder coated), Corner striker, Secondary Strikers, Cylinder, Door transmission gear made of mild steel with multi point locking system with striker, Hinges of zinc alloy (white powder coated) and 5mm thick glazing with selected quality glass, complete all as specified and directed.(Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 22 | S & F factory made uPVC white colour casement (Openable) Door with gauzed shutter made of extruded profile with wall thickness of 2.3mm (+0.2mm). door profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 104mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle both side with Cylinder, made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and with stainless steel wire mesh (0.36mm nominal dia of wire and average width of aperture 1.40mm. (Note: The unit rate quoted by contractor include cost of wire mesh and all other connected accessories. Net opening will be measured for payment purpose.) |
| 23 | S&F Aluminium alloy powder coated windows sliding track (three track), bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double rebated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Aluminium section numbers for sliding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc. including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and directed. |
| 24 | S & F for Aluminium alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 1.80mm, shutter top section 47.62mm x 44.45mm x 1.80mm thick, shutter bottom section 114.30mm x 44.45mm x 1.80mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 1.80mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, door closer heavy duty “SAMRAT”, locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and directed. |
| 25 | S & F for Aluminium alloy powder coated door shutter top section 47.62mm x 44.45mm x 1.80mm thick, shutter bottom section 114.30mm x 44.45mm x 1.80mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 1.80mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/Openable frame and channel as directed and approved by GE and as per IS specifications including proven of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, door closer heavy duty “SAMRAT”, locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and directed. |
| 26 | S & F in repair aluminium dia cast door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 27 | S & F in repair 100mm size stainless steel butt hinges fixing with screws to PVC door frame complete all as specified and directed. |
| 28 | S & F in repair Aluminium Anodised 150mm size barrel tower bolt complete all as specified and directed. |
| 29 | S & F in repair150mm size aluminium anodised handles complete all as specified and directed. |
| 30 | S & F 100mm size Mild steel butt hinges medium weight fixing with screws or welded to Iron door frame complete all as specified and directed. |
| 31 | S & F Mild steel 150mm size barrel tower bolt complete all as specified and directed. |
| 32 | S & F 300 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 33 | S & F in repairs Aluminium Anodised 150mm size barrel tower bolt complete all as specified and directed. |
| 34 | S & F in repairs 150mm size aluminium anodised handles complete all as specified and directed. |
| 35 | S & F in repairs floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece fixed in floor, over all length of cover plate 140mm complete all as specified and directed. |
| 36 | S & F in repair for 200mm long Mild steel, semi-barrel tower bolt, open cover, with sheet pressed barrel, stove enamelled black with bright bolt and fixed complete all as specified and directed. |
| 37 | S & F in repairs 300 mm long aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. Please Enable Macros to View BoQ information |
| 38 | S & F in repairs 300 mm long aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender