Tender For Repair Replacement Of Drain/Fencing Gate, Boundary Wall, Footpath And Misc Work At Admin Area Cpe And Tech Area Taku Cpe Itarsi Under Ge Bhopal
Tender Value
35 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
0 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Replacement Of Drain/Fencing Gate, Boundary Wall, Footpath And Misc Work At Admin Area Cpe And Tech Area Taku Cpe Itarsi Under Ge Bhopal
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Dismantling of old chain link fencing including flat iron, line wire complete all as specified and as directed. |
| 3 | Dismantling posts or struts (wood, steel or RCC,), any section, including taking out embedded portion and making good disturbed ground; posts embedded in concrete, brick work, masonry, etc complete, complete all as specified and directed. |
| 4 | Excavation in post holes (or similar holes) each n exc 0.5cum, getting out hard/dense soil and returning , filling and ramming earth or broken rubble mixed with earth with around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface complete all as specified and directed. |
| 5 | M&L for PCC (1:3:6) type C2 40 mm graded aggregate in foundation and mass concrete in post holes complete all as specified and directed. |
| 6 | S/F Mild steel work conforming to Fe-290-0 GdeE-165 complete, in nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed. |
| 7 | Supply only GI chain link fencing of any size and any type, straining bolts & fixed to angle iron post complete all as specified. |
| 8 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified directed. |
| 9 | S&F mild steel bolts screw (Machine made) wth hexagonal or square head at one end and screw the other or screw both ends, each screwed ends to be fitted with washer and one hexagonal or square length of nut exceeding 5cm and not exceedigng 10cm and diameter of neck in mm 11 to 15mm complete all as specified and directed. |
| 10 | Supply only MS 10mm dia TMT bar Fe-410-w (grade E-250) quality as line wire for holding chain link mesh complete all as specified and as directed. |
| 11 | Supply and fixing galvanised, 2 strand steel barbed wire 2.24mm dia barbard with 2mm dia barbs at 75 mm spacing straining and fixing to any type of standard rails straining bolts, including and tying at crossing with and provision of galvnised mild wire, staples or steel pins etc complete all as specified and directed including distmantling of unservisable barberdd wire. (Each line of wire to be measured). |
| 12 | M&L for Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and directed. |
| 13 | Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description n.exc. 10cm width or girth including preparation of new surfaces complete all as specified and directed. |
| 14 | Concertina Coil Fencing with punch tape concertina coil 450mm dia, stretched to 6.0 metre length having 50 Nos spiral turns per 6.0 metre length, spring core wire (2.59mm thick) of high tensile strength of 1620 N/Sqm with tape (0.52mm thick) hot dip galvanised upto 20 microns and weight of each coil coil 7.5 to 8.0 Kgs) and fixing the same on 'Y shaped angle iron 8 horizontal R.B.T (Reinforced Barbed Tape) stud tied with GI staple stud tied with GI staple and GI |clips to retain horizontal clips shall a 5.0 Nos per 2 spiral turns approximate 125 clips per coil including necessary bolts all as specified and as directed. |
| 15 | Dismantling of wrought iron or mild steel work of any description not other wise provided complete all as specified and as directed. |
| 16 | S&F Framed work of rolled mild steel conforming to Fe-410-W (Gde-E-250) quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete all as specified and directed. |
| 17 | Taking down and Fixing only Framed work of rolled mild steel conforming to Fe-410-W (Gde-E-250) quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete all as specified and directed. |
| 18 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 19 | Material and labour for providing cement concrete 1:4:8 type D2 (40 mm stone aggregate) as in foundations, filling and mass concrete including forms, curved/flat complete all as specified and as directed. |
| 20 | Material and labour for providing cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) for surface channel and drain including forms curved/flat complete all as specified and as directed. |
| 21 | M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 22 | All as per item No.20.00 here-in-before but exc 30cm inner girth/width of part there of over. |
| 23 | Providing cement concrete type B1 1:2:4 (using 12.5 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including forms curved/flat, as directed. |
| 24 | Demolition of brick work built in cement mortar for security wall and similar works portion ordered to be dismantled complete all as specified and as directed. |
| 25 | M&L for Brickwork with Modular bricks, straight or curved on plan exc 6m mean radius built in 1:4 complete all as specified and as directed. |
| 26 | M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan exc 6m mean radius complete all as specified and directed. |
| 27 | All as per item No. 25.00 here-in before but except Modular bricks. Note :- Old serviceable bricks obtained from item above, cleaned and shall be reused. |
| 28 | Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 29 | Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 30 | Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 31 | Supply only intregal water proofing compound as specified and directed. |
| 32 | M&L for two coats of cement base paint on newly plastered surfaces of wall including preparation of surfaces over one coat of alkali resistant primer all as specified and directed. |
| 33 | M&L for two coats of white wash on newly plastered surfaces of wall including preparation of surfaces all as specified and directed. |
| 34 | M&L 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in subbase of flooring complete all as specified and directed. |
| 35 | M&L 20mm thick screed bed in CM (1:6) as in sub base of floor complete all as specified and directed. |
| 36 | M & L Chequered cement concrete Factory made tiles pre polished lacuqer and rubber/glossy finish 30cmx30cmx22-25mm thick, set ,jointed and pointed in neat cement slurry with grey cement and pigment in floors complete all as specified and directed. |
| 37 | Material and labour for exterior parking/path tiles 10mm thick jointless, colour/ design as per site requirement, over including 15 mm thick screed bed, complete all as specified and directed. |
| 38 | M&L for sand filing for cushing of paver block all as specified and directed. |
| 39 | M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80mm thickness,complete all as specified and directed. |
| 40 | Deduct Schedule of credit (calculation will be done off line) Rs. 63904.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender