Tender For Provn Of Tiling, Roof Wk & False Ceiling With Panel Lights Of Bldg No T-33 At Hq 77 Mtn Bde C , 02 X Toilet And 02 X Bathroom At Mt Area, Garage (05 X 2.5 Ton Vehs) At Mt Area At 2/5 Gr, Wall Paneling At Bldg No T-141 Of Single Offrs Livin
Tender Value
47.42 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
19 days left
EMD
94900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Tiling, Roof Wk & False Ceiling With Panel Lights Of Bldg No T-33 At Hq 77 Mtn Bde C , 02 X Toilet And 02 X Bathroom At Mt Area, Garage (05 X 2.5 Ton Vehs) At Mt Area At 2/5 Gr, Wall Paneling At Bldg No T-141 Of Single Offrs Living And Bldg No T-127 Jcos Club Of 11 Grenadiers And Floor Tiles In Bldg No T-173 & T-176 Of 11 Grenadiers At Sect 1B (Mil Stn Thakurbari) Under Ge (N) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | BoQ BOQ Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER TEZPUR (NORTH) NAME OF WORK : PROVN OF TILING, ROOF WK & FALSE CEILING WITH PANEL LIGHTS OF BLDG NO T-33 AT HQ 77 MTN BDE CAMP, 02 X TOILET AND 02 X BATHROOM AT MT AREA, GARAGE (05 X 2.5 TON VEHS) AT MT AREA AT 2/5 GR, WALL PANELING AT BLDG NO T-141 OF SINGLE OFFRS LIVING AND BLDG NO T-127 JCOs CLUB OF 11 GRENADIERS AND FLOOR TILES IN BLDG NO T-173 & T-176 OF 11 GRENADIERS AT SECT 1B (MIL STN THAKURBARI) UNDER GE (N) TEZPUR Contract No : GE(N)/TEZ/ OF 2026-2027 (8310) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Description of items of works Item Code / Make Approx No. of quentity required. Units Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures to be entered by the Bidder Rs. P. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT (In INR) TOTAL AMOUNT With Taxes TOTAL AMOUNT (In Words) |
| 2 | Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and directed. |
| 3 | Excavation in trenches n.exc 1.50m wide and n.exc 1.5m depth for foundation etc and getting out in soft/loose soil complete all as specified and directed. |
| 4 | Excavation in trenches exc 1.50m and n.exc 3.0m depth for foundation etc and getting out in soft/loose soil complete all as specified and directed. |
| 5 | Returning filling in including spreading, levelling, watering well ramming in layers n.exc 25cm thick complete all as specified and directed. |
| 6 | Removing excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 7 | M&L for cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundation etc. complete all as specified and directed. |
| 8 | M&L for Reinforced cement concrete (nominal mix)Type B1 1:2:4 (20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 9 | M&L for Reinforced cement concrete Type B1 1:2:4 (20 mm graded crushed stone aggregate, nominal mix) in Foundations, including rafts footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 10 | M&L for Reinforced cement concrete Type B1 1:2:4 (20 mm graded crushed stone aggregate ,nominal mix) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 11 | M&L for TMT bars , 10 mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 12 | M&L for Mild steel TMT bars 6 to 8 mm dia as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 13 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams in flat surface; and similar work; vertical or to batter complete all as specified and directed. |
| 14 | M&L for Formwork to sides of pillars,posts, struts, piers, columns and stanchions in Square, rectangular or polygonal complete all as specified and directed. |
| 15 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. in flat surface complete all as specified and directed. |
| 16 | M&L for cement concrete 1:3:6 type C2 using 40mm graded crushed stone aggregate as in surface channels/drain complete all as specified and directed. |
| 17 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement complete all as specified and directed. |
| 18 | M&L for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in plinth protection/ path etc (75mm thick) finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 19 | Forming constraction (Dummy) joints 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed. |
| 20 | M&L for AAC Block made with fine aggregates, cement and aeration agent, straight or curved on plan exc 6 m mean radius built in Cement mortar 1:6 or with chemical mortar adhesive complete all as specified and as directed. |
| 21 | M&L for AAC Block made with fine aggreagates, cement and aeration agent, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 or chemical mortar adhesive, complete all as specified and as directed. |
| 22 | M&L for rendering 15 mm thick on stone masonary and other than fair faces of brick work/concrete/AAC Block surfaces in cement mortar (1:6) finished even & fair complete all as specified and directed. |
| 23 | M&L for rendering 15 mm thick in cement mortar 1:4 in two layers of 10mm and 5mm using WPC in finishing layer on brick/AAC Block or concrete surfaces finished even & fair (WPC for finishing layer will be paid seperately as supply only). |
| 24 | Supply only integral water proofing compound complete all as specified and directed. |
| 25 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 26 | M&L for hardcore of guage n.exc 63mm deposited, spread and levelled, watered, well rammed to a uniform smooth surface n.exc 15cm thick using broken stone or boulders complete all as specified and directed. |
| 27 | M&L for providing 100 mm thick cement concrete type D-2, 1:4:8 using 40mm graded aggregrate as in sub in base of floors complete all as specified and directed. |
| 28 | M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.11sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed on brick or concrete or stone surfaces in cement mortar (1:6) as in screed bed/backing coat for laying wall finishes complete all as specified and directed. |
| 29 | M&L coloured glazed ceramic tiles 200x 300x7 mm thick, in vertical surfaces, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing plaster on brick or concrete or stone surfaces in cement mortar (1:4) as in screed bed/backing coat for laying wall finishes complete all as specified and directed. |
| 30 | S&F for Rolled sections Fe 410-w (grade E-250) quality-A as in main and cross beams, hip and jack rafters; purlins, tank staging where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 31 | S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulleywheel complete all as specified and directed. |
| 32 | S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed. |
| 33 | M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering fixed with self tapping screws complete all as specified and directed. |
| 34 | M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering fixed with self tapping screws complete all as specified and directed. |
| 35 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall complete all as specified and directed. |
| 36 | S&F 15mm bore medium grade tubes, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 37 | S&F 20mm bore medium grade tubes, galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 38 | S&F Stop valve 20mm bore with long shank & cup (concealed type) of PTMT any colour screwed for iron pipe & fixed. (min. weight 20mm-112gms) complete all as specified and directed. |
| 39 | S&F Chromium plated shower roses 125mm size of Std quality and approved make with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 40 | S&F in repair CP tubular towel rail 600 mm long complete all as specified and directed. |
| 41 | S&F in repairs Soap dish complete all as specified and directed. |
| 42 | S&F Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. |
| 43 | S&F Vitreous China wash basin, white, flat back, size 630x450mm (flat back or angle back type) including brackets, cutting for and pinning 'in brackets waste coupling, waste pipe, grating complete all as specified and directed. |
| 44 | S&F wash down water closet (pedestal pan) including connection to drain pipes and to flushing pipes anti-syphonage pipe etc excluding flushing cistern incl flush pipe, jet and seat cover complete as as specified and directed |
| 45 | S&F in repair vitreous china squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete (excluding flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc. complete all as specified and directed. |
| 46 | S&F 10 litres PVC Syphonic action type, Flushing cistern, high level, with inlet, ball valve, float chain and pull incl flush pipe and brackets complete all as specified and directed. |
| 47 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 48 | S&F Waste coupling 32mm bore of PTMT (half or full threaded) min. weight 32mm-45gms) complete all as specified and directed. |
| 49 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs withchromium plated brass screws and cup washers complete all as specified and directed. |
| 50 | S&F 15mm bore bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 51 | S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 52 | S&F 15mm bore stop valves/angle cock, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 53 | S&F PVC connections 15mm size with PTMT nuts of length 300/450mm complete all as specified and directed. |
| 54 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement including grating complete all as specified and as directed. |
| 55 | S&F PVC (SWR) gully trap 125/110 mm incl grating setting and jointing with solvent cement complete all as specified and directed. |
| 56 | M&L for PCC 1:3:6 type C1 as in concrete bed to drain pipe incl packing under haunching against the sides of pipes after are laid and tested for 110mm dia pipe complete all as specified and directed. |
| 57 | S&F for 75mm bore PVC ( SWR) pipes single socketed ,in any length with rubber ring joints, fixed to wall or laid in trenches or floors complete all as specified and as directed. |
| 58 | S&F for PVC (SWR) bends of radius 75mm bore complete all as specified and directed. |
| 59 | S&F for PVC (SWR) junction single,(Single T) equal or unequal of radius 75mm bore complete all as specified and directed. |
| 60 | S&F for PVC (SWR) vent cowl 75mm bore complete all as specified and directed. |
| 61 | S&F for 110MM PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or laid in trenches or floors complete all as specified and as directed. |
| 62 | S&F for PVC (SWR) bends of radius 110mm bore. |
| 63 | S&F for PVC (SWR) junction single,(Single T) equal or unequal of radius 110mm bore complete all as specified and directed. |
| 64 | S&F for PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 65 | S&F for 1000 litre capacity ,rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) in position all specified in SSR Part –I complete all as specified and as directed. |
| 66 | M&L for Ball valves (20 mm) high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed complete all as specified and as directed. |
| 67 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.complete all as specified and directed. |
| 68 | S&F factory made solid panel Prelam PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both face prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 69 | S&F of 75 mm size mild steel butt hinges medium weight complete all as specified and directed. |
| 70 | S&F of 150mm size aluminium handle cast type,anodised complete all as specified and directed. |
| 71 | S&F of 150mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified and directed. |
| 72 | M&L for two coats of synthetic enamel painting to new steel surface over a coat of red oxide primer including preparation of surfaces area exc 10cm width & girth complete all as specified and directed. |
| 73 | M&L for two coats of synthetic enamel painting to new steel surface over a coat of red oxide primer including preparation of surfaces area not exc 10cm width & girth complete all as specified and directed. |
| 74 | M&L for Preparation of new plastered surfaces and applying two coats of OBD over a coat of alkali resistant primer complete all as specified and directed. |
| 75 | M&L for applying two coat of cement based paint paint on new surface including preparation of surface complete including priming plastered and other surfaces with alkali resistant priming paint complete all as directed. |
| 76 | Excavating post holes (or similar holes ) each n.exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 77 | M&L for rendering 15 mm thick,in CM 1:6. on fair faces of brick work/AAC Block or finished concrete surfaces even & smooth without using extra cement complete all as specified and directed. |
| 78 | M&L plain cement concrete type 1:3:6 type C2( 40mm agg) in foundations, filing & mass concrete complete all as specified and directed. |
| 79 | M&L 75mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base concrete complete all as specified and directed. |
| 80 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 81 | M&L PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in coping, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 82 | S&F for steel work in tubular trussess / posts including special shaped washers etc complete using ERW or including butt welded tubes confirming to IS 1161 - 1979 grade St -240., structural steel is painted one shop coat of zinc chromate primer paint (incl preparation of surface) at contractor's workshop before fabrication complete all as specified and directed. |
| 83 | M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over one coat of red oxide primer complete all as specified and directed. |
| 84 | M&L for preparing of new plastered wall surface and treated with three coat white wash complete all as specified and directed. |
| 85 | Dismantling of asbestos cement (corrugated or semi corrugated ) sheets in roof covering any thickness complete all as specified and directed. |
| 86 | S&F anodised GI snap grid (Size of grid 605mmx605mm ) frame work for false ceiling including GI wire 4mm thick as a suspender for GI snap grid framing including S&F 4 mm thick Non asbestos fibre cement building board decorative type( e-board) fixed in aluminium snap grid frame work with screws complete all as specified and directed. |
| 87 | S&F MS steel work in (MS round/square/rectangular pipe,angle) posts,truss ,purlin and water tank stagging including special shaped washers etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint including dismantling old unserviceable iron frame work complete all as specified and directed. |
| 88 | S&F Fe 410-W (Gde-E-250) quality mild steel plate plain or chequered, 5 mm thick or over in thickness including dismantling old unserviceable iron frame work complete all as specified and directed. |
| 89 | S&F Mild steel screw bolts (machine made) with hexagonal /square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut,length of bolt exc 5cm but n exc 10cm long dia of shank 5 to 10 mm complete all as specified and directed. |
| 90 | M&L for 40mm thick hard wood planed at both sides boarding as in rafters,truess and members including dismantling old unserviceable boarding complete all as specified and directed. |
| 91 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 92 | M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.18sqm but not exceeding 0.36 sqm, as in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing plaster on brick or concrete or stone surfaces in cement mortar (1:4) as in screed bed/backing coat for laying wall finishes complete all as specified and directed. |
| 93 | Dismantling of floor hearth or wall tiling incl cement mortar bedding ( but not backing) and removing debris and rubbish off the premises complete all as specified and directed. |
| 94 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 95 | M&L for 25 mm thick cement concrete (1:2:4) type B1 ( 20mm graded stone aggregate) as in floor finished rough to receive floor finishes complete all as specified and directed. |
| 96 | M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceding 0.18sqm but not exceeding 0.36 sqm, in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing plaster on brick or concrete or stone surfaces in cement mortar (1:4) as in screed bed/backing coat for laying wall finishes complete all as specified and directed. |
| 97 | M & L for 2nd class soft wood in plain fillets square rectangular or triangular in section exc 13 cm sq & n cxc 25 cm sq clean sawn secured with nails or brads and fixed with screws complete all as specified & as directed by Engr-in-Charge |
| 98 | M&L for preparing surace of wood and wood based materials new or old of any description and girth not otherwise described and treated with creosote oil complete as all specified and directed. |
| 99 | M&L for 2 nd class hard wood scantling wrought finished in any position over and 40 sq. cm & over in section,complete all as specified and directed. |
| 100 | M&L preparation of new surface & applying two coat of synthetic enamel paint to wooden surfaces exc 10 cm girth complete all as specified and directed. |
| 101 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to PVC frame as per specification and drawing all as specified & as directed by Engr-in-Charge. |
| 102 | S&F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing all as specified & as directed by Engr-in-Charge |
| 103 | Gl wire netting 0.90mm dia & 12mm mesh lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting & waste complete all as specified and directed. |
| 104 | M&L Rendering 10mm thick on stone masonry surfaces or surface other than one face of lathing in CM (1:6) including taking down old unserviceable plaster/lathing complete all as specified and directed. |
| 105 | M&L Rendering 10mm thick on stone masonry surfaces or other side of lathing of lathing in CM (1:6) including taking down old unserviceable plaster/lathing complete all as specified and directed. |
| 106 | S&F 2nd class softwood 30 mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); to chowkats complete all as specified and directed. |
| 107 | S&F for second class hardwood plain,solid,straight,chowkats and frames,wrought,framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints complete all as specified and directed. |
| 108 | M & L for point wiring in replacement with 1.5 sqmm FRLSH, PVC insulated stranded copper conductor single core including non metalic PVC casing caping (MMS ISI) of size not less than 20 mm on wall/over ceiling,modular metal boxes of required size and with modular plates incl of all accessories and all as specified including 1.5 sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dolly for light / fan/ bell point controlled by one switch including taking down old unserviceable existing point wiring.Note:- (i) Cost of PVC casing caping, modular plates,frames, cover plates etc; are deemed to be included in the quoted rate. |
| 109 | All as per item above but for 3 pin 5 Amps switch socket on independent board with 1.5 sq mm copper cable complete all as specified and directed. |
| 110 | All as per item above but for 3 pin 16 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and directed. |
| 111 | All as per item above but with 4.0 sq mm copper cable for AC/Geyser complete all as specified and directed. |
| 112 | All as per item above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed. |
| 113 | S & F in replacement of modular switch 10A,1 module single pole, one way complete all as specified and directed. |
| 114 | S & F in replacement of modular socket outlet 5 pin ,10 Amps,2 module, 240 Volts complete all as specified and directed. |
| 115 | S & F in replacement of modular socket outlet 5 pin ,16 Amps,2 module, 240 Volts complete all as specified and directed. |
| 116 | S & F in replacement of modular switch 16A,1 module single pole, one way complete all as specified and directed. |
| 117 | S & F in replacement of ceiling rose polycarbonate type three terminals complete all as specified and directed. |
| 118 | S & F in replacement of modular step type electronic fan regulator ,two module 120 watt single pole 240 Volts complete all as specified |
| 119 | Supply & Fix (S&F) in replacement of Lamp holder PVC/Polycarbonate type with cord grip cap including 10W LED bulb B22 suitable for pendent fitting complete all as specified and directed |
| 120 | S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 121 | S&F in replacement mirror light batten type 10/11 W 230V AC, 50Hz, Pf >0.98, THD <10% on wall complete all as specified and directed by Engineer in charge. |
| 122 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC in warm white color recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer in charge. |
| 123 | Supply and fixing in replacement LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engnr-in-charge. |
| 124 | M&L in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area6 sq. mm 2core complete all as specified and directed. |
| 125 | M&L in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area10 sq. mm 2core complete all as specified and directed. |
| 126 | Material and labour for sand cushioning for cable protection using clean dry sand complete all as specified and directed. |
| 127 | Supply and laying in trenches brick common burnt clay building brick, sub class 'B' designated- 75 with width equal to length of brick for cable protection complete. |
| 128 | M&L for 25mm dia GI tubing light grade with all necessary fittings laid in trenches fixed to walls/poles/under road/floor etc for cable protection with suitablke clamp, complete all as specified and directed. |
| 129 | S&F for 25mm bore stop valve cast copper alloy screwed down, high pressure with crutch or butter fly handle, crewed both ends for iron pipe or unions fixed of 25 mm bore dia of pipe chromium plated fancy type complete all as specified and directed. |
| 130 | Supply and fix electric water heater storage type ABS body(as directed by Engineer-In-charge) with glasslined stainless steel inner tank capacity 25 litres, heating element of 2 KW, BEE 5 star rated with all accessories such as safety valve , thermostat , NRV , SS 304 connection pipe , nut bolt with metalic anchor fasterner etc for fixing on wall & testing, complete all as specified and directed. Note: Warranty of 2 year on geyser and 07 year on geyser tank shall be submitted by the contractor. |
| 131 | Supply and fix of exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers. Necessary connection like hole cutting and connecteion to existing wiring deemed to be incld in quoated rate complete all as specified and directed. |
| 132 | Supply and draw submain wiring in replacement with two single core 4 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor on wall surface PVC casing caping medium grade of 20-25 mm wide, with double locking type including 4 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete all as specified and as directed.Note:- Cost of PVC casing caping on walls and making good disturbed wall surfaces matching with the existing shade / tint are deemed to be included in the rates quoted. |
| 133 | Supply and draw submain wiring in replacement with two single core 6 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor on wall surface PVC casing caping medium grade of 20-25 mm wide, with double locking type including 6 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete all as specified and as directed.Note:- Cost of PVC casing caping on walls and making good disturbed wall surfaces matching with the existing shade / tint are deemed to be included in the rates quoted. |
| 134 | S & F sheet metal enclosure double door for MCB DBs SPN 6 way 240 V, complete flush mounted all as specified and as directed. |
| 135 | S & F sheet metal enclosure double door for MCB DBs SPN 8 way 240 V, complete flush mounted all as specified and as directed. |
| 136 | S & F sheet metal enclosure double door for MCB DBs SPN 4 way 240 V, complete flush mounted all as specified and as directed. |
| 137 | S & F MCB single pole (SP) 6 to 32 Amps, 240 volts , C curve , AC , 50 Hz ,10 kA complete all as specified and directed. |
| 138 | S & F MCB Single pole & neutral (SPN) 63-100 Amps, 240 volts , C Curve, AC , 10 kA complete all as specified and directed. |
| 139 | S & F MCB Single pole & neutral (SPN) 32-40 Amps, 240 volts , C Curve, AC , 10 kA complete all as specified and directed. |
| 140 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as shown on electrical plate No. 3 of SSR part - I , including taking out old U/s complete alll as specified and directed . Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender