Tender For Repairs To Wooden/ Upvc/ Aluminium Joinery, Cupboards, Aluminium/ Iron Grill And Att Work Etc At Inhs Patanjali Amdalli, Mes Area & Site E Of Naval Base Area Karwar.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
14 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uttara Kannada → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Wooden/ Upvc/ Aluminium Joinery, Cupboards, Aluminium/ Iron Grill And Att Work Etc At Inhs Patanjali Amdalli, Mes Area & Site E Of Naval Base Area Karwar.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats/frames with shutters of any description (without taking off shutters from the frames), not exceeding 1.5 Sqm each, including making good disturbed portions of walls to match the existing surfaces. The rate quoted shall be deemed to include the same, complete all as specified and directed. |
| 2 | Taking down chowkats/frames with shutters of any description (without taking off shutters from the frames), exceeding 1.5 Sqm and not exceeding 4 Sqm each, including making good disturbed portions of walls to match the existing surfaces. The rate quoted shall be deemed to include the same, complete all as specified and directed. |
| 3 | Dismantling of wooden scantlings exceeding 40 Sqcm in section, in any position, as in framed work, complete all as specified and directed. |
| 4 | M&L for second class hardwood plain, solid, straight chowkats and frames, wrought, framed and rebated on the solid, rounded or chamfered, put together with glue and pinned at joints, complete all as specified and directed. |
| 5 | S&F second class hardwood factory-made plain framed and panelled shutters, 35 mm thick, using BWP commercial plywood or 12 mm veneered particle board with commercial veneering on both faces. Size of rails and stiles as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 6 | S&F second class hardwood glazed skeleton shutters, 35 mm thick, open rebated, without sash bars, all as specified in Clause 8.24(a) of SSR Part I, Section 8, for doors, complete all as specified and directed. |
| 7 | M&L for second class hardwood glazed and skeleton shutters, 30 mm thick, for windows/ventilators, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. Sizes of members as per SSR Part I, Section 8, Clause 8.24(a), complete all as specified and directed. |
| 8 | Providing and fixing factory-made uPVC white colour sliding windows, not exceeding 2 Sqm each, three-track, made of extruded profiles with wall thickness 2.3 mm (±0.2 mm), with multi-chamber hollow sections. Frame size 88 mm × 52 mm, sliding sash 42 mm × 67 mm, sliding mesh sash 42 mm × 57 mm, sliding interlock (one vertical length in each shutter) 45.5 mm × 28 mm, glazing bead 24.6 mm × 16 mm, mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water, making arrangements for fixing hardware, EPDM gasket, and 1.2 mm (±0.2 mm) thick galvanised steel reinforcement: frame (30 mm × 18 mm) – 2 Nos, sliding sash (30 mm × 18 mm), sliding mesh sash (26 mm × 10 mm). Frame fixed to wall with 8 mm × 100 mm long fasteners, complete with hardware (zinc alloy touch lock with white powder coating), steel roller system, stainless steel wire cloth of 0.36 mm nominal diameter and average aperture width 1.40 mm, and all accessories, complete all as specified and directed. |
| 9 | S&F in repairs 18 mm thick WPC board, one side laminated, as in cupboards, including solvent cement, stainless steel hinges/handles, SS screws, etc., as per manufacturer’s instructions, complete all as specified and directed. |
| 10 | S&F in repairs stainless steel drawer channels, 50 cm to 60 cm long, suitable for smooth movement of drawers, complete all as specified and directed. |
| 11 | M&L for 6 mm thick external teak wood lipping fixed to 18/19 mm thick block board or veneered particle board, fixed with nails, complete all as specified and directed. |
| 12 | S&F in repairs extruded aluminium alloy butt hinges, 100 mm size, with galvanised mild steel hinge pin, Type C-21, complete all as specified and directed. |
| 13 | S&F in repairs aluminium anodised barrel tower bolts of extruded section, with length of bolt 200 mm, fixed, complete all as specified and directed. |
| 14 | S&F in repairs aluminium alloy sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm diameter, including a minimum of 6 Nos bolts and nuts (four on bolt plate and two on staple plate), length of bolt 300 mm, fixed, complete all as specified and directed. |
| 15 | S&F in repairs aluminium anodised cast type handles, 150 mm size, complete all as specified and directed. |
| 16 | S&F in repairs aluminium anodised cast type handles, 100 mm size, complete all as specified and directed. |
| 17 | S&F in repair aluminium powder coated frames (minimum powder coating thickness 50 microns) for doors, windows, ventilators with one or more rebates, including joining cleats for fixing, complete all as specified and directed. |
| 18 | S&F aluminium powder coated window/ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55 kg/m, including necessary jointing cleats, glazing clips, rubber/neoprene packing, aluminium snap beading, screws, etc., complete all as specified and directed. |
| 19 | S&F anodised aluminium grills (anodised transparent or dyed to required shade as per IS: 1868 with minimum anodic coating of Grade AC-15), of approved design/pattern, with approved standard sections, fixed to existing window frames with chromium plated brass/stainless steel screws at 200 mm centres, including cutting grills to proper opening size for operation of handles and providing approved anodised aluminium standard section around the opening, complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F in repairs aluminium alloy wire cloth, 0.45 mm nominal diameter of wire with average aperture width 1.40 mm, fixed with aluminium wire staples, complete all as specified and directed. |
| 21 | M&L for 5 mm thick sheet glass, ordinary quality, and glazing with aluminium beading, not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 22 | M&L for 4 mm thick sheet glass, ordinary quality, and glazing not exceeding 0.5 Sqm in each pane, including wooden beading, complete all as specified and directed. |
| 23 | M&L for toughened glass, 12 mm thick, as in hinged doors, railings, partitions, automatic doors and similar works, including cutting to shape and drilling holes as required, complete all as specified and directed. |
| 24 | M&L for applying two coats of synthetic enamel paint by using mechanical spray (maximum working pressure of 3300 PSI) over a coat of pink primer on new wooden surfaces of girth exceeding 10 cm, including preparation of surfaces, complete all as specified and directed. |
| 25 | M&L for providing and injecting chemical emulsion for post-construction anti-termite treatment along the external walls below concrete or masonry apron, at the rate of 2.25 litres per linear metre, including drilling holes and plugging with cement mortar and making good to match the existing surface, complete all as specified and directed. |
| 26 | M&L for providing and injecting chemical emulsion for post-construction anti-termite treatment at points of contact of wood with masonry/concrete surfaces, using chemical emulsion mixed with oil or kerosene at the rate of 0.5 litres per hole, including drilling 6 mm diameter holes at a downward angle of 45° at 150 mm centres and plugging with cement mortar (1:2) to match the existing surface, complete all as specified and directed. |
| 27 | S&F auto-closing hinges, 35 mm, of 0 crank or 8 crank, opening up to 110°, for kitchen cabinet shutters, complete all as specified and directed. |
| 28 | S&F stainless steel handles, 100 mm size, for kitchen cabinet shutters, complete all as specified and directed. |
| 29 | S&F in repairs aluminium powder coated curtain rods, fancy type, 20–25 mm diameter, complete all as specified and directed. |
| 30 | S&F brackets suitable for fancy type curtain rods, complete all as specified and directed. |
| 31 | S&F PVC fancy knobs for curtain rods, suitable for fixing to curtain rods, complete all as specified and directed. |
| 32 | Dismantling structural steel work, including doors and gates but excluding framed trusses, complete all as specified and directed. |
| 33 | S&F stainless steel railing (Grade 304) made of hollow tubes, channels, plates, etc., including welding, grinding, buffing, polishing and bending to required curvature (wherever required), fitted with necessary stainless steel nuts and bolts, including fixing with suitable arrangement using stainless steel dash fasteners/bolts of required size on top of floor or side of waist slab, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender