Tender For Special Repair Of Damaged Water Supply Pipeline & Connected Works At Hussainiwal Line And Damaged Earthing Of Distribution Boxes At Various Accns At Namkum Under Ge Ranchi
Tender Value
42.72 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
19 days left
EMD
85500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Damaged Water Supply Pipeline & Connected Works At Hussainiwal Line And Damaged Earthing Of Distribution Boxes At Various Accns At Namkum Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out for foundation ect. Or for shafts, well, cesspits, mainholes ect. In any type of soil for foundation and getting out and levelling of bottom surface to required level all as specified and directed by engineer-in-charge. |
| 2 | Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed. |
| 3 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed. |
| 4 | Cutting the existing road of any kind straight by manual, depth and width not less than 30 cm for pipes up to 50 mm dia and filling back with excavated soil up to 75 % road portion and 25 % shall be made with cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate complete all as specified and directed. |
| 5 | M&L for road crossing/ drain crossing by adopting trench less tunnelling work through specified pipe jacking method by erecting the equipment to true to the alignment and gradient by hydraulic pipe jacking technique complete including tunnelling, excavation in any type of soils including hard rock, TO CROSS WATER PIPE LINE UP TO 60 mm dia in any length including jointing materials and necessary conveyance charges of machinery and other required materials in co-ordination with the concerned authorities complete all as specified and as directed INCLUDING MAKING GOOD OF DISTURBED SURFACE.NOTE: Pipe will be measured and paid separately under relevant items. |
| 6 | Taking up or down steel tubing and connections, from trench or wall/floor including cleaning the pipes free from scaling for re-fixing or removal complete with all fittings and connections of the following sizes :-Note : (a) Excavation and Earth work shall be measured and paid separately. |
| 7 | 20 mm dia |
| 8 | 25 mm dia |
| 9 | 32 mm dia |
| 10 | 40 mm dia |
| 11 | 50 mm dia |
| 12 | Supply, laying, jointing, fixing, testing and commissioning of three-layer Polypropylene Random Copolymer (PP-R) pipes, comprising inner antimicrobial layer, middle PP-R pressure layer, and outer UV-stabilized protective layer, ISI marked and conforming to IS:15801, SDR-7.4 (PN-16), including PP-R plain fittings such as elbows, tees, bends, reducers, couplers, sockets, end caps, unions & necessary fittings for connections with existing GI Pipeline etc., complete.The pipes and fittings shall be laid in trenches, chases, walls, ceilings, shafts or floors, either concealed or exposed, including cutting, grooving/chasing, making openings, fixing with clamps/hangers/supports, and jointing by heat fusion welding using approved welding machine as per manufacturer’s recommendations. The item includes testing the complete pipeline system to the required pressure, flushing, commissioning, and making good all disturbed surfaces such as plaster, concrete, flooring, brickwork, and finishes to match the existing, including all necessary accessories, consumables, tools and labour, complete all as specified and as directed by Engineer-in-Charge, of the following sizes :- |
| 13 | 20 mm dia |
| 14 | 25 mm dia |
| 15 | 32 mm dia |
| 16 | 40 mm dia |
| 17 | 50 mm dia |
| 18 | Supply and laying steel water tubing medium grade, galvanised with all fittings such as bends, elbow, tee, socket, reducers, unions etc as required at site laid in trenches, fixed to wall and ceilings and testing for leakages complete all as specified and directed for the following sizes:-Note : (a) Excavation and Earth work shall be measured and paid separately. |
| 19 | 40 mm dia |
| 20 | 50 mm dia |
| 21 | Supply and fix in replacement of unserviceable Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed for the following sizes:- |
| 22 | 40mm dia bore |
| 23 | 50mm dia bore |
| 24 | Supply, fixing, testing and commissioning of PP-R gate valves with brass insert suitable for PP-R piping system, including jointing by heat fusion welding, complete all as specified and directed for the following sizes:- |
| 25 | Description all as per Srl items No.10 here-in-before but of size 25 mm dia |
| 26 | Description all as per Srl items No.10 here-in-before but of size 40 mm dia |
| 27 | Description all as per Srl items No.10 here-in-before but of size 50 mm dia |
| 28 | Supply and fixing ball valve of specified size, PPR, with brass insert suitable for PP-R piping system, including jointing by heat fusion welding, complete all as specified and directed |
| 29 | M&L drilling and tapping Ductile iron/ Cast iron water mains 20 mm bore in position for branch connections of following internal dia size complete all as directed at site. |
| 30 | S&F in repair straight plain brass ferrules 20 mm bore (or connecting screws)screwed both ends of following size dia complete all as directed at site. |
| 31 | Supply and fixing in replacement of 20mm dia float valve brass, high pressure with polythene float and fly nut complete screwed for iron pipe complete all as directed at site. |
| 32 | Construction of valve pit of sizes 600mmx600mmx600mm (internal dimentions), any type soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50m and depositing where directed, 100mm thick PCC in foundation of the mix (1:4:8), type D-2, (using 40mm graded crushed stone aggregate) brick masonry in cement mortar (1:4), rendering, 12 mm thick cement mortar (1:4) internally, finished even and fair & pointing flush externaly as the work proceeds in the same mortar, mild steel frame, MS sheet cover 5mm thick with handle and locking arrangement, painting all the exposed MS work with two coats of synthetic enamel paint of the tint as approved by the GE over a coat of red oxide primer and painting all the MS embedded in PCC with two coats of black bituminous paint including dismantling old unsv valve pit, complete all as specified. Please Enable Macros to View BoQ information |
| 33 | Construction of valve pit of sizes 600mmx600mmx600mm (internal dimentions), any type soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50m and depositing where directed, 100mm thick PCC in foundation of the mix (1:4:8), type D-2, (using 40mm graded crushed stone aggregate) brick masonry in cement mortar (1:4), rendering, 12 mm thick cement mortar (1:4) internally, finished even and fair & pointing flush externaly as the work proceeds in the same mortar, mild steel frame, MS sheet cover 5mm thick with handle and locking arrangement, painting all the exposed MS work with two coats of synthetic enamel paint of the tint as approved by the GE over a coat of red oxide primer and painting all the MS embedded in PCC with two coats of black bituminous paint including dismantling old unsv valve pit, complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender