Tender For Repair/ Maintenance Of Bathroom Leakage, Seepage And Modular Kitchen In Certain Accoumodation At Arjan Vihar & Area Of Age B/R-Ii Under Ge (Central) Delhi Cantt-10 Including Repair/Replacement Of Old Unsv Electric Fitting/Fixtures And Repl
Tender Value
40 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
5 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Bathroom Leakage, Seepage And Modular Kitchen In Certain Accoumodation At Arjan Vihar & Area Of Age B/R-Ii Under Ge (Central) Delhi Cantt-10 Including Repair/Replacement Of Old Unsv Electric Fitting/Fixtures And Replace In Modular Type Internal Wiring, Db, Mcb, Mccb & Other Allied E/M Work At Arjan Vihar Offrs Md Accn And Adjoining Area Under Ge (Central) Delhi Cantt-10
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Aug-2026 | Revised BOQ | BOQ | 20-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | S&F 18/19mm thick factory made PVC moulded solid board one side pre-laminated for cabinet boxes, crockery almirahs, books shelves etc with self and shutter full size fitted under/above the kitchen cooking platform and other rooms directed incl provn of fixing arrangement etc, complete all as specified and directed. |
| 2 | “S&F Modular Cabinet Kitchen accessories of Stainless Steel grade-304,6mm size rod thickness including :-(i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) of size as per site requirement all spd and directed by Engr in charge. |
| 3 | M & L for 18-20 mm thick Black Granite stone work (table rubbed and polished) over and including15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab moulded and polished including dismantling the existing stone slab with screed/ backing , complete all as specified and as directed by the Engineer-in-Charge.Note- The cost of making hole for Gas pipe in cooking plateform is included in unit cost of item and nothing extra shall be paid on this account. |
| 4 | M & L for reinforced cement concrete 1 :2:4 type B-I nominal mix design for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 5 | Supply and fix TMT bars,6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified. |
| 6 | M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for finish surface (Horizontal or sloping) complete all as specified. |
| 7 | S&F sinks made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed. |
| 8 | S&F in repair 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all as specified. |
| 9 | S&F in Soft closing ball bearing telescopic channel of size 20 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs |
| 10 | S&F Continuous (piano) hinges MS bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified and as directed by Engr-in-charge. |
| 11 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as directed |
| 12 | S & F for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 all as specified and as directed. |
| 13 | M&L for Glazed ceramic tiles in vertical surface 600x 300x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:3) complete all as specified and as directed. |
| 14 | M&L glazed ceramic colour (non skid) tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm ( 300 mmx300mm x 7mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed. |
| 15 | M&L for coloured/white ceramic Non Skid tiles of size 600x600x 7 to 8mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:4 complete all as directed. |
| 16 | Demolition of brick work built in cement mortar in any description and position, complete all as specified. |
| 17 | M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified. |
| 18 | Taking down existing chowkats or frames of any description and in any position exceeding 1.5 sqm n-exc 4.0 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed. |
| 19 | Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified. |
| 20 | Taking down shutters of any description and in any position exceeding 1 sqm & not exceeding 2 sqm each complete all as specified and directed. |
| 21 | Resecuring or easing & adjusting of shutters without taking down of any description n. exc 1.0 Sqm each complete all as specified and directed. |
| 22 | S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 23 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 24 | S & F for anodised aluminium frame (minimum 50 micron powder coating) for doors windows ventilators with one or more rebates including cleat for fixing etc complete all as specified and directed by Engr in charge |
| 25 | S & F aluminium powder coated of any colour (thickness or powder coating not less than 50 micron) windows and ventilator shutters with aluminium grill side hung type without sash bars aluminium section weighing 0.55KG/Sqm including necessary jointing cleats glazing clips rubber packing anodised snap beading screws anodised aluminium fitting such as peg stay 150 mm long (01 No) hinges type B2 100 mm long(02 No) suitable handle (01 No) complete all as specified and directed. |
| 26 | S & F 5.5 mm thick sheet glass selected quality and glazing with oil putty in squareds exc 0.50 sqm in each pane complete all as specified and directed. |
| 27 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed including taking down old one. |
| 28 | S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made”. |
| 29 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headedcounter sunk S.S screws, all as per direction of EngineerIn- Charge. |
| 30 | S&F 100 mm long (size) butt hinges, Aluminium, complete all as specified. |
| 31 | S & F 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, complete all as specified. |
| 32 | S&F in repair stainless steel AISI 304 grade floor door stopper with hard drawn steel spring 140mm long complete all as specified and directed. |
| 33 | S & F in repair aluminium anodised floor door stopper 140 mm long |
| 34 | S&F in repair mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller plate complete all as specified |
| 35 | S&F in repair MS roller with \\"C\\" shape staple, chromium plated for 5.5mm thick sheet glass complete allas specified |
| 36 | S&F in repair 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 37 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 38 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as directed. |
| 39 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 40 | Taking down cement plaster of any description and in any position of brick or stone wall/concrete surfaces on walls ,ceiling etc including raking out joints ,hacking for key scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed |
| 41 | M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces/stone masonry and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 42 | M&L for preparation of the newly plastered surfaces of walls & applying two coats distemper oil- emulsion , white or tinted over a coat of primer surfaces of wall complete all as specified and directed. |
| 43 | M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 44 | M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed. |
| 45 | M&L Providing and applying cement base plaster of Paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as directed. |
| 46 | Supply only water proofing compound (WPC- ISI Mark) |
| 47 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar |
| 48 | M&L for 16-18mm thick Udaipur green marble laid over and including 15mm thick screed bed in CM 1: 6 as in floors /treads/risers of steps in one piece including cutting, jointing, moulding and granite polishing, laid in designed complete all as specited and directed |
| 49 | Taking up or down 15 mm dia GI tubing and connections including cleaning for re-fixing or removal to store in any position upto G+5 storey bldg complete all as specified. |
| 50 | S&F 15 mm dia GI tubing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc as in horizontal or vertical surfaces upto G+5 storey bldg complete, all as specified. |
| 51 | Supplying and laying of CPVC 20mm OD pipes SDR 11 & Plain/Brass CPVC SDR 11 fittings as required on walls/ceiling or laying in floors complete all as specified complete with fitting as required. |
| 52 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 53 | S&F in repair PVC connection pipe of 15mm x 600mm long with 2 Nos brass check nuts with washers, complete all as specified. |
| 54 | S&F in repairs vitreous chinaware wash hand basin flat back with full pedestal of size 550mm x 400mm complete including, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Engr in charge. |
| 55 | S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified. |
| 56 | S&F in repair fancy type brass chromium plated soap dish, complete all as specified. |
| 57 | S&F in repair CP grating 125mm dia, complete all as specified. |
| 58 | S&F in repair fancy type 15mm dia brass chromium plated quarter turn basin mixer with braided hose for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified. |
| 59 | S&F in repair 15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. |
| 60 | S&F in repair fancy type 600mmx450mm bevelled edge mirror of selected quality glass mounted on 4mm thick and rectangular shape and fixed to wooden plugs with chromium plated brass screw and cupwashers, all as specified. |
| 61 | S&F in repair fancy type chromium plated quarter turn brass angle valve type suitable for 15mm bore pipe complete all as specified |
| 62 | S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified . |
| 63 | S&F in repair bib tap, cast copper alloy chromium plated, screwed down high pressure with crutch of butter fly handle fancy type CP for 15 mm bore dia complete all as specified and directed. |
| 64 | Taking down care fully copper/aluminium point wiring from wooden batten or conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer in charge. |
| 65 | M & L for Point wiring complete with 1.5 sqmm single core PVC unsheathed insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new/existing and metalic/non-metalic rigid PVC conduit medium grade ISI Marked not less than 20 mm dia including all conduit accessories surface /concealed in wall/ceiling/fixed to roof/truss/columns etc by cutting chases and including provision of 1.5 sqmm PVC unsheathed insulated copper cable FRLS as earth continuty, suitable fabricated branded modular metal flush box / M S steel terminal boxes duly make embossed, concealed in wall and making the adjacent surfaces smooth through POP work & painting as per site requirement incl provision of modular inner and outer cover plates with laminated top sheet cover for housing switches , socket out let and fan regulators etc concealed in walls with suitable , all as specified and as directed for the followings:- |
| 66 | One light/ fan point controlled by one way switch |
| 67 | One bell point controlled by one bell push |
| 68 | One light point controlled by two Nos two way switches |
| 69 | One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board. |
| 70 | One 3 pin 5 Amps socket outlet point controlled by one way switch on same board. |
| 71 | All as per item No 65 but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board complete. |
| 72 | Supply & fixing in replacement of white cover plate with frame 1 module/ 2 module complete all as specified and directed by Engineer in charge. |
| 73 | Supply & fixing in replacement of white cover plate with frame 3/4 module complete all as specified and directed by Engineer in charge. |
| 74 | Supply & fixing in replacement of white cover plate with frame 6 module complete all as specified and directed by Engineer in charge. |
| 75 | Supply & fixing in replacement of white cover plate with frame 8 module complete all as specified and directed by Engineer in charge. |
| 76 | M&L switch Modular type 6 Amps 1 Way,1 module, 230V AC complete all as specified. |
| 77 | M&L Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified. |
| 78 | M&L switch modular type 6 amp SP two way, 1 module complete all as specified. |
| 79 | M&L Modular Bell push button SP with indicator 6 Amps, 1 module 230V AC complete. |
| 80 | M&L switch Modular type 16 Amps 1Way, 1 module with modular plat, 230V AC complete. |
| 81 | M&L Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete. |
| 82 | M&L modular stepped type electronic fan regulator 120W, 1/2 module complete. |
| 83 | M&L Switch piano flush button type single pole one way 6 Amps complete all as specified. |
| 84 | M&L switch piano flush button type single pole 16 Amps complete all as specified. |
| 85 | M&L socket outlet, 2 in 1, 3 pin 6 and 16 Amp single pole complete all as specified. |
| 86 | M&L socket outlet 6 Amp flush button type complete all as specified. |
| 87 | M&L regulator electronic 5 steps type suitable for 1200/1400 mm sweep 230 volts.. |
| 88 | M&L bell electric (dingdong) 230 volt, SP all complete all as specified and directed . |
| 89 | M&L insulated body, angle/batten holder with back plate complete. |
| 90 | S&F ceiling rose surface PVC type with three terminals complete all as specified and directed . |
| 91 | M&L sheet metal enclosure, modular/non modular as per site requirment single pole and neutral with a two pin and earth plug and socket 230 Volts grade complete with one single pole MCB 'C' series 20 A capacity complete all as specified and directed. |
| 92 | S & F LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2000 systems lumen outputwith lifetime of 25000 burning hours with, Power Factor > 0.9, colour temperature - 6500K, surge protection 2.5KV in CM, meets LED IS specifications, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 93 | S & F LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, > 1000 systems lumen outputwith lifetime of 25000 burning hours with, Power Factor > 0.9, colour temperature - 6500K, surge protection 2.5KV in CM, meets LED IS specifications, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed. |
| 94 | S & F LED 9/10 watts bulkhead fitting with non yellowing polycarbonate cover, IP 65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 25,000 burning hours , Power Factor >0.9, driver with Voltage range 150-270V, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. |
| 95 | S&F in replacement of decorative type wall mounted luminaire (Comet) with unbreakable poly carbonate materials suitable for 1x14 watt LED bulb B22 base complete all as specified and directed by Engineer in charge. |
| 96 | S & F surface ceiling mounted, LED down light fitting 12 watts , system efficacy at luminary level ≥ 70 Lumens/watt, 25000 burning hours with Power Factor > 0.90, with high voltage variation range - 150 to 270 Volts AC and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. . |
| 97 | S & F LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified. |
| 98 | S & F LED bulb 14 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified. Please Enable Macros to View BoQ information |
| 99 | S & F LED bulb 14 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 20, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender