Tender For Special Repair Of Bldg No P - 127 At Ranjit Vihar, Brichgunj Mil Stn, Sri Vijaya Puram
Tender Value
63.28 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
26 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Bldg No P - 127 At Ranjit Vihar, Brichgunj Mil Stn, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 2 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 3 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 4 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engineer-in-Charge. |
| 5 | Dismantling mild steel work of any description not otherwise provided complete all as specified and directed by Engineer-in-Charge. |
| 6 | S&F Roof trusses (framed), trussed, purlins, trusses gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engineer-in-Charge. |
| 7 | S&F MS works as in wind ties for roof including securing bolts etc complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for painting two coats of synthetic enamel paint over one coat of red oxide including preparation to new or previously untreated steel and surfaces of any description, not otherwise described, over10 cm width or grith complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L for painting one coat of synthetic enamel paint including preparation to previously treated old steel surfaces of any description, not otherwise described, over10 cm width or grith complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L for preparation new steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. |
| 11 | Dismantling of ceiling boards of any description and any thickness, fixed in any position incl cover fillets if any size complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for false ceiling with aluminium grid work (size of grid 600x600mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle Hangers 6mm dia. G.I (upto 1200mm length) adjusting level fixed to roof slabs means of ceiling cleats made out of G.I flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engineer-in-Charge. |
| 13 | S&F in repairs Eco board 600 X 600 X 4mm thick fixed in aluminium frame work with screws or nails etc complete all as specified and directed by Engr-in-charge. |
| 14 | Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L for screed bedding 10mm thick in CM 1:4 using water proof compound on roof finished even and smooth (WPC will be measured and paid separately) complete all as specified and directed by Engineer-in-Charge. |
| 16 | M & L for water proofing treatment with the following specifications as per manufacturers instructions:- (i) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primed surface using glass fibre base bitumen felt, grade 2. (ii) Laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application, with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iii) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane. |
| 17 | S&F Rotational moulded polyethlene water storage tank 500 litres capacity (cylindrical vertical with closed top Float, gate valve ) hoisted and fixed in position all as specified in SSR part I including dismantling the same complete all as specified and directed by Engineer-in-Charge. |
| 18 | Taking up or down 15mm dia bore steel tubing galvanised and connections complete all as specified and directed by Engineer-in-Charge. |
| 19 | Taking up or down 20mm dia bore steel tubing galvanised and connections complete all as specified and directed by Engineer-in-Charge. |
| 20 | S & F 15mm dia bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl etc complete all as specified and directed by Engineer-in-Charge. |
| 21 | S & F 20mm dia bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and directed by Engineer-in-Charge. |
| 22 | S & F in repairs Pillar taps , cast copper alloy , with capstan heads , chromium plated , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm incl necessary fittings, complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F in repair vitreous china wash hand basin white flat back size 630x450mm incl brackets, PTMT coupling, 32 mm GI pipe waste pipe complete all as specified and directed by Engineer-in-Charge. |
| 24 | S & F in repairs sink, made up of stainless steel, 1mm thick for kitchen or laboratory with plug, waste pipe, washer, including bedding in cement mortar 1:3 into dwarf wall or cantilever brackets and connecting union to pipe, over all size 495 x 420mm, bowl size 410 x 330 x 160mm etc, complete all as specified and as directed by Engineer-in-Charge. |
| 25 | S & F in repairs stainless steel, plate rack of size 750 x 780mm with all fittings as per sample kept in GE's office complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F in repairs 20mm dia Gun metal globe or gate valve with iron wheel head, screwed both end for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 27 | M&L in repairs for 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by Engineer-in-Charge |
| 28 | S&F 15mm dia Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) including taking down angle stop valves of any description complete all as specified and directed by Engineer-in-Charge. |
| 29 | S & F in repairs shower rose cast copper alloy chromium plated, of size 125mm complete all as specified and directed by Engineer-in-Charge. |
| 30 | S & F in repairs Bib tap cast copper alloy chromium plated, 15 mm dia with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge. |
| 31 | S & F in repairs Mirror of selected quality glass 600 mm x 450 mm bevelled edge mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs and CP brass screws & cup washers complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F PVC connections of 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge. |
| 33 | S&F vitreous china water closet, pedestal type, white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc including taking down existing water closet squatt pattern complete all as specified and directed by Engineer-in-Charge |
| 34 | S&F in repairs 2 in 1 bib cock chromium plated 15mm dia bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge. |
| 36 | S& F in repairs PVC flushing cistern 10 litres capacity syphonic action type, low level, white with inlet, ball valve, float, handle and flush pipe, etc complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L for pvc floor trap,75mm outer dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer-in-Charge. |
| 38 | M&L for cast iron Nahani trap,75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F in repairs Aluminium anodised tubular towel rail 20mm dia complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F in repairs aluminium anodised brackets for towel rail complete all as specified and directed by Engineer-in-Charge. |
| 41 | Dismantling of CI drain pipes,50-100 mm dia jointed in cement mortar complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply and fix PVC (SWR) pipes 110 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 43 | All as per item No. 42 above but 75mm bore of pipe complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply and fix 110mm PVC (SWR) bends any radius with access door complete all as specified and directed by Engineer-in-Charge. |
| 45 | All as per item No. 44 above but 75mm bore of pipe complete all as specified and directed by Engineer-in-Charge. |
| 46 | Supply only 110mm dia PVC (SWR) single/Tee branch pieces(Equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches and jointed complete all as specified and directed by Engineer-in-Charge. |
| 47 | All as per item No. 46 above but 75mm bore of pipe complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F only PVC (SWR) 75mm bore vent cowl complete all as specified and directed by Engineer-in-Charge. |
| 49 | M&L for removing loose and broken concrete by chiselling /picking etc upto a depth of 80 to 100 mm from columns, beams and similar structural members cutting edges cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure and removal of debries to a distance not exc 50 m including necessary scaffolding etc complete all as specified and directed by Engr-in-Charge. |
| 50 | M&L for applying one coat of anti corrossive primer @ 0.25 Lit/Sqm for the steel area to exposed old and new reinforcement to the full circumfrance and length of bars to form unbroken 40 Micron thick film complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L for applying one coat epoxy bonding agent @ 2.6 sqm/lit or as per manufactures instruction to old concrete surfaces of columns, beams and similar structural members complete all as specified and directed by Engineer-in-Charge. |
| 52 | M&L for non shrink, cementitous micro concrete mixed with 12.5 graded stone aggregate using Renderoc RG or equivalent by weight (18 Kg Aggregate :25 Kg Renderoc RG) respectively (as per manufatures instruction) laid in average thickness 80 to 100 mm in surface complete all as specified and as directed by Engineer-in-Charge. |
| 53 | M&L for spraying curing compound as per manufactures instruction on freshly cast concrete surfaces complete all as specified and directed by Engr-in-Charge. |
| 54 | M&L for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 20 mm from floor/roof slab/chajjas and similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure and removal of debries to a distance not exc 50 M all as specified and directed by Engr-in-Charge, including necessary scaffolding etc complete. |
| 55 | M&L for application of high build polymer modified cement mortar (1:2.5) mixed with 3 kg SBR per bag of cement in ceiling surfaces 10 to 20mm thick in two layers surfaces over a coat of bonding agent Nito Bond SBR (1 Ltr SBR + 1 Ltr) water + 3 kg cement) (as per manufacturer's instructions)complete all as specified and directed by Engineer-in-Charge. |
| 56 | M&L for drilling holes in slabs/wall/column/beams for anchor steel reinforcement incl washing with water, inserting lock set 'P' in the holes and all as specified and directed by Eng-in- Charge. |
| 57 | M&L mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 58 | M&L Mild steel TMT bars 6-8mm dia. And over upto & including 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips as in stirrups binders and spacers complete all as specified and directed by Engr-in-Charge. |
| 59 | Demolition of RCC in Roof, chajja,Beams fins, facia column edges including cutting reinforcement etc., complete all as specified and directed by Engineer-in-Charge. |
| 60 | M&L fair finished flat Form work to RCC Chajjas and similar items including edges complete all as specified and directed by Engr-in-Charge. |
| 61 | M & L for RCC M-30(using 20mm graded stone aggregate) including chajja complete all as specified and directed by Engr-in-Charge. |
| 62 | M&L extra for drip mould 40mm x 10mm and similar work not exc 15cm width for RCC chajjas etc complete all as specified and directed by Engr-in-Charge. |
| 63 | M&L Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in roof kerbs, mud stops or chamfered on edges complete all as specified and directed by Engr-in-Charge. |
| 64 | M&L fair finished flat Form work to RCC ,fins facia, para pets and similar items including edges complete all as specified and directed by Engr-in-Charge. |
| 65 | M & L for RCC M-30 (using 20mm graded stone aggregate) including, fins, complete all as specified and directed by Engr-in-Charge. |
| 66 | S & F coloured joint free non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set, jointed and pointed in white or coloured cement to match over screed bed in cement mortar 1:4, 15 mm thick, complete all as specified and directed by Engineer-in-Charge. |
| 67 | M & L for machine cut kota stone slab 20 to 25mm thick in treads of steps in stair laid and jointed with white cement slurry mixed with pigments to match the shade of the slab incl rubbing and mirror polishing laid over cement screed bed in cement mortar 1:4, 20mm thick, complete all as specified and directed by Engineer-in-Charge. |
| 68 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 69 | Dismantling of Stone slabs laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-Charge.. |
| 70 | S & F coloured glazed ceramic tiles 450 mm x 300mm x 7mm to 8mm thick on vertical surfaces such as skirting & dados etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces etc including backing coat of 10mm thick CM 1:3 complete all as specified and directed by Engr-in-Charge. |
| 71 | M & L for machine cut kota stone slab 20 to 25mm thick in rise/steps, skirting, dado and pillar laid and jointed with white cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishing laid over cement screed bed in cement mortar 1:3, 10mm thick, complete all as specified and directed by Engr-in-Charge. |
| 72 | M & L for granite slab 20 mm thick as in cooking platforms, bedded 20 mm thick ,in cement mortor 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and as directed by Engineer-in-charge |
| 73 | Grinding, rubbing and mirror polishing of existing granite stone slabs complete all as specified and as directed by Engineer-in-charge. |
| 74 | Grinding, rubbing and mirror polishing of edges of existing granite stone slabs complete all as specified and directed by Engineer-in-Charge. |
| 75 | Taking down chowkats or frames with shutters area n.exc 4.00 Sqm each(without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge. |
| 76 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube including taking down existing PVC door frame with shutter of any description as per drawings complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having at PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge. |
| 78 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge. |
| 79 | S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 100mm Size complete all as specified and directed by Engr-in-Charge. |
| 80 | S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge. |
| 81 | S & F Hasp and staple 100mm size, safety type, Alluminium anodised with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge. |
| 82 | S & F 100mm long Extruded Aluminium alloy handles, Fabricated type, anodised complete all as specified and directed by Engr-in-Charge. |
| 83 | S & F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates incl joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge. |
| 84 | S&F Powder coated aluminium door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed by Engineer-in-Charge. |
| 85 | S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos), hinges type B-21 100mm long (2 Nos) suitable handle (1 no) complete all as specified and directed by Engineer-in-Charge. |
| 86 | S & F 4 mm thick ACP board (Aluminium Composite Panel ) fixed to aluminium frames complete all as specified and directed by Engineer -in-Charge. |
| 87 | S & F 4mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-charge. |
| 88 | S & F 4mm thick figured glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-charge. |
| 89 | S & F aluminium alloy wire mesh 0.45 nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as specified and directed by Engineer-in-Charge. |
| 90 | S&F Powder coated aluminium grill (anodised transparent or dyed to required shad according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 91 | S & F in repair floor door stopper of length 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-Charge. |
| 92 | S&F in repairs 25mm dia stainless steel curtain rod incl bracket, complete all as specified and directed by Engineer-in-Charge. |
| 93 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 94 | M&L rendering 5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6 on external surfaces of block masontry even and fair without using extra cement.(WPC shall be added in only 5mm thick top layer of plaster @ 3% by weight of cement content or as per manufacturers instructions.) |
| 95 | Supply only integral water proofing compound complete all as specified and directed by Engr-in-Charge. |
| 96 | M&L for rendering 5 mm thick in CM 1:3 finished even and smooth without using extra cement on ceiling complete all as specified and directed by Engr-in-Charge. |
| 97 | M & L for two coats of OBD over a coat of primer on newly plastered surfaces of walls including nesessary preparation of surfaces complete all as specified and directed by Engineer-in-Charge. |
| 98 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including prepartion and applying priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-Charge. |
| 99 | M & L for three coats of white wash on newly plastered surfaces of ceiling including nesessary preparation of surfaces complete all as specified and directed by Engineer-in-Charge. |
| 100 | M & L for preparing old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed by Engineer-in-Charge. |
| 101 | M & L for two coats of OBD over one coat of 1 mm wall care putty on old plastered surfaces of walls including complete removing existing treatment complete all as specified and directed by Engineer-in-Charge. |
| 102 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including complete removal of existing treatment and applying priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces |
| 103 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge. |
| 104 | M&L for PCC 1:3:6, type C2, (Using 40 mm graded stone aggregate), 75mm thick as in plinth protection/Sub base flooring, finishing surface fair and even, in panels & filling joints with mortar, etc., complete all as specified and directed by Engineer-in-Charge. |
| 105 | Material & labour for chequred cement concrete tiles of size 20 cm x 20 cm x 25 mm with size of chips up to 12 mm jointed and pointed in neat cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 106 | M&L for Demoliotion of Reinforced cement Concrete parapet wall of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge. |
| 107 | Supply and Fix Stainless Steel railing, (SS 316 grade) of safety railing consists of vertical and horizontal bars of thickness not less than 2.0mm, welded to base plate , MS plate, maintenance free, corrosion resistant, aesthetic looking stainless steel extruded sections complete all as specified and directed by Engineer-in-charge. |
| 108 | Taking down carefully copper point wiring (light, fan, socket or power) DBs, light fittings complete offering credit, making good disturbed surfaces of walls, floors, etc, complete all as specified and directed by Engineer-in-Charge. |
| 109 | M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including concealed PVC conduit and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including ISI marked modular GI flush box of suitable size with inner and outer white plastic plate (Same make of approved switch and socket) concealed in walls, with modular cover plate for housing the switches, socket outlets,fan regulators etc., complete all as specified and directed by Engr-in-Charge for the following :-Note:-Modular cover plate will be measure seperately |
| 110 | One light/ bell point controlled by one switch |
| 111 | One exhaust fan point controlled by one switch |
| 112 | One light point controlled by two 2 way switch |
| 113 | One fan point controlled by one switch and one regulator |
| 114 | (One 3 pin switch socket outlet point 5 amps on same board with other switches |
| 115 | One 3 pin switch socket outlet point 5 amps on independent board |
| 116 | All as per item No 109 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and directed by Engineer-in-Charge. |
| 117 | Supply and fixing Modular switch 1 way 6 A, 1 module complete all as specified and directed by Engineer-in-Charge. |
| 118 | Supply and fixing Modular switch 1 way 16 A, 1 module complete all as specified and directed by Engineer-in-Charge. |
| 119 | Supply and fixing Modular switch 2 way 6 A, 1 module complete all as specified and directed by Engineer-in-Charge. |
| 120 | Supply and fixing Modular Bell push 5A, 1 module complete all as specified and directed by Engineer-in-Charge. |
| 121 | Supply and fixing modular socket outlet, 2/3 pin combined , 6/16 Amps, combined 2 module, 230 volts complete all as specified and directed by Engineer-in-Charge. |
| 122 | Supply and fixing modular socket outlet, 2/3 pin combined , 6 Amps, combined 2 module, 230 volts complete all as specified and directed by Engineer-in-Charge. |
| 123 | S & F modular white cover plate with frame, 3 module complete all as specified and directed by Engineer-in-Charge. |
| 124 | S & F modular white cover plate with frame, 6 module complete all as specified and directed by Engineer-in-Charge. |
| 125 | S & F modular white cover plate with frame, 8 module complete all as specified and directed by Engineer-in-Charge. |
| 126 | Supply and fixing modular fan step regulator, 230 V, AC, 120W - 2 module complete all as specified and directed by Engineer-in-Charge. |
| 127 | Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified and directed by Engineer-in-Charge. |
| 128 | Supply and fix bell Ding Dong 240 Volts 50 Hz complete all as specified and directed by Engr-in-Charge. |
| 129 | Taking down serviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site with new clamps, nuts, washers, safety wire of size not less than 1.00mm & bolts including cotter pin for complete all as specified and directed by Engineer-in-Charge. |
| 130 | Supply and fix exhaust fan suitable for on working of AC 230 V, 50 HZ 225 mm sweep light duty , with metal body complete all as specified and directed by Engineer-in-Charge. |
| 131 | Taking down serviceable exhaust 300 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades complete and refixing back at site with new clamps, nuts, washers & bolts complete all as specified and directed by Engineer-in-Charge. |
| 132 | Supply and fix sheet metal enclosures Loadline vertical distribution board TPN,4 ways 415 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs and in and including 100A MCCB ,16KA as incomming complete all as specified and as directed including taking down old MCB DBs complete including cutting chases pinning in making good to facings where required and pointing in cement mortar 1:3 ends of edges of landing,steps, cills sunsades,shelves,lintels,etc and cutting for concealed conduit wiring etc and making good,cutting not exc 10 cm girth in brick wall complete all as specified and directed by Engr-in-Charge. |
| 133 | Supply and fix metal enclosure distribution board SPN, 12 way 240 volts, with 200 amps rated bus bar, double door suitable for mounting MCBs including taking down old MCB/DB complete all as specified and directed by Engineer-in-Charge.Note-: Incoming & outgoing connections from the DB shall be provided with proper lugs/ thimbles etc |
| 134 | Supply and fix MCB single pole 240 volts, 6 to 32 amps \\"B\\" series complete all as specified and directed by Engineer-in-Charge |
| 135 | Supply and fix single pole and netural 240 Volts 40 amps complete all as specified and directed by Engineer-in-Charge |
| 136 | Supply and fix lamp holder(angle type) PVC body with back plate suitable for batten fittings, complete all as specified and directed by Engineer-in-Charge. |
| 137 | Supply and fix LED lamp of 9/10 watt complete all as specified and directed by Engineer-in-Charge. |
| 138 | Supply and fixing aluminium housing LED batten 22 /20 Watt mounted batten fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose complete all as specified and directed by Engineer-in-Charge. |
| 139 | Supply and fixing LED batten 1 X 20 Watt 4ft inverter LED batten square profile and polycarbonate channel. Lithium Ion battery with charging time 8 hours- 10 hours and back up time upto 4 hours including 3 core 1 sqmm PVC insulated multi stranded copper conductor sleeve color matching to fitting and connecting up complete all as specified and directed by Engineer-in-Charge. |
| 140 | Supply and fixing aluminium housing LED Smart bright batten 10 Watt mounted batten fitting 2 ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose complete all as specified and directed by Engineer-in-Charge. |
| 141 | S&F 25 W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 building secuirity luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on wallscomplete all as specified and directed by Engineer-in-Charge. |
| 142 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed by Engr-in-Charge. Electrical plate No. 3 of SSR part - I |
| 143 | M & L for sub main wiring complete with two runs of 6 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including concealed PVC conduit and all accessories fixed to wall/ roofs/ floors etc with one run of 6 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit one run of earth continuity conductor shall be measured as one running metre. |
| 144 | supply & Lay in repair of XLPE insulated, heavy duty 1100 volt grade electric armoured LT UG cable with aluminium conductor of size 25 Sqmm 3.5 Core in trenches/along the wall/including making all connections, saddles, spacers including scaffolding if any required for saddling the cable in walls of building of height up to 25 meter, complete with aluminium lugs as required at site complete all as specified and directed by Engineer-in-Charge. |
| 145 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out Soft/loose Soil complete all as specified and directed by Engineer-in-Charge. |
| 146 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cm soil / hard dense soil complete all as specified and directed by Engineer-in-Charge. |
| 147 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point.Soft Soil / hard dense soil complete all as specified and directed by Engineer-in-Charge. |
| 148 | Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked complete all as specified and directed by Engineer-in-Charge. |
| 149 | Disconnecting the electric connection ,taking down the existing Electric Energy meter of any type and size carefully , refix the same incl electric connection to the meter at existing / new location complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender