Public Administrative Department Government Departments Closing in 4 days TDR #56759168

Tender For Construction Of 50 Kld Capacity Stp And 10 Kld Etp In Esi Hospital Bhopal

Issued by Government Departments · Bhopal, Madhya Pradesh
Tender Value
1.02 Crore
Estimated cost
Bid Submission
10 Aug 2026
4 days left
EMD
1.02 Lakhs
Bank guarantee accepted
Document Fee
2425
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Construction Of 50 Kld Capacity Stp And 10 Kld Etp In Esi Hospital Bhopal

BOQ

Name of Work:- CONSTRUCTION OF 50 KLD CAPACITY STP AND 10 KLD ETP IN ESI HOSPITAL BHOPAL
Sl. No. Item Description
1Eatth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of sutplus excavated soil as directed, within a lead of 50 m.
2All kinds of soil.
3Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exteeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
4Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, wateting, etc. and disposing of sUJplus excavated soil as directed, within a lead of 50 111 :
5All kinds of soil
6Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mmdia
7Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutte1ing - All work up to plinth level :
81:5:IO(I cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size de1ived from natural sources)
9Extt-a for providing and mixing water proofing matciial in cement concrete work in doses by weight of cement as per manufacturer's specification.
10Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
11Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centeting, shutteiing, finishing and reinforcement - All work up to plinth level :
121:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)
13Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement
141:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
15Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate20 mm nominal size derived from natural sources).
16Centering and shuttering including strutting, propping etc. and removal of form for
17Foundations, footings, bases of columns, etc. for massconcrete
18Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
19Suspended floors, roofs, landings, balconies and accessplatform
20Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
21Thermo-Mechanically Treated bars of grade Fe-500D or more.
22Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
23Cement mortar 1:4 (1 cement : 4 coarse sand)
24Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
25Hot finished welded type tubes
26Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
27Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
28In stringers, treads, landings etc. of stair cases, includinguse of chequered plate wherever required, all complete
29Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
30Providing and fixing precoated galvanised steel sheet roofingaccessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
31Ridges plain (500 - 600mm)
32Flashings/ Aprons.( Upto 600 mm)
3315 mm cement plaster 1:2 (1 cement : 2 stone dust) on the rough side of single or half brick wall.
34Neat cement punning.
35Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
36Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
37Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
3825 mm nominal dia Pipes
3950 mm nominal dia Pipes
40Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
41Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes
42110 mm diameter
43Providing and fixing square-mouth S.W. gully trap class SP-1complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
44150 x 100 mm size P type
45With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
46Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps
47150 mm diameter
48Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
49250 mm dia. R.C.C. pipe
50Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
51Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
52With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
53Extra for depth for manholes :
54Size 90x80 cm
55With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
56Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete
57For pipes 100 to 250 mm diameter
58Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer-in-charge:
59Rectangular manhole 90x80 cm and 45 cm deep
60Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge
6140 MM DIA
6250 MM DIA
63Providing and Fixing CPVC Ball valve of approved quality complete as per the direction of engineer encharge
6450 mm nominal dia
65Providing and Fixing CPVC Union in CPVC pipe including cutting and jointing of pipe & fitting with one step one step CPVC solvent cement and testing of joints complete as per direction of Engineer Incharge
66Unions 50 mm OD
67Supply and filling of Kopra of Approved quality in trenches plinth side of foundation etc in layer not exceeding 20 cm in depth consolidating each lyer by ramming and watering for all lead and lift all complete as per direction of engineer inchrge.
68Consent to Stablishment along with NOC from Polution control Board.
69Architecture Consultancy Fee
70Bar Screen for STP and ETP
71Providing Stainless Steel (SS304) Perforated Fine Bar Screen .The hole size of screen shall be for soild handling capacity of 8-10mm sewage flow.
72Size : DDE
73MOC : SS-304
74Qty - 02 Nos (for STP and ETP)
75Application - To trap the larger and small particles/ debries upto 8-10mm size from the effluent.
76Note - Bar Screen Clean Manually
77Raw Sewage Transfer Pump for STP
78Providing non clogging submersible type Wastewater lifting pump in single phase having CI casing & CI impeller complete with and foundation bolts all accessories, motor of required capacity. Pressure gauge on delivery line with isolation cock, level controller to control the level of sump automatically. Pumps shall have following duty: Three Phase.
79Application - To transfer the sewage from Equalization/ Collection tank to Aeration (MBBR-1) tank
80Quantity - 02 Nos (1W + 1S)
81Type - Submersibe Pump
82Flow Rate : Upto 3.5 M3/Hr
83Head : 8-10 mtr
84Solid handling : 18 MM
85RPM- 2900
86Make - CRI/ Kriloskar/ Lubi
87Recirculation/ Sludge Transfer Pump for STP
88Providing non clogging monoblock type Wastewater lifting pump in single phase having CI casing & CI impeller complete with and foundation bolts all accessories, motor of required capacity. Pressure gauge on delivery line with isolation cock, level controller to control the level of sump automatically. Pumps shall have following duty: Three Phase.
89Application- To transfer the slurry from bottom of tube settler tank to the Sludge Holding Tank and also recirculate the slurry to MBBR 1 Tank to maintain MLSS.
90Quantity - 02 Nos (1W + 1S)
91Type - Selfpriming/ Monobloc
92Flow Rate : Upto 3.5 M3/Hr
93Head : 10-12 mtr
94RPM- 2700
95Solid handling : 5 MM
96Make - CRI/ Kriloskar/ Lubi
97Effluent Transfer Pump for ETP
98Providing non clogging monoblock type Wastewater lifting pump in single phase having CI casing & CI impeller complete with and foundation bolts all accessories, motor of required capacity. pressure gauge on delivery line with isolation cock, level controller to control the level of sump automatically. Pumps shall have following duty: Three Phase.
99Application - To transfer the effluent from Equalization/ Collection tank to Flash Mixer Tank
100Quantity - 02 Nos (1W + 1S)
101Type - Selfpriming/ Monobloc
102Flow Rate : Upto 1 M3/Hr
103Head : 8-10 mtr
104RPM- 2700
105Solid handling : 5 MM
106Make - CRI/ Kriloskar/ Lubi
107Chemical Dosing System for ETP Plant
108Note:- The Agitation in Chemical Dosing tanks/ Flash Mixer/ Flocculation Tank through Air Blower.
109Lime Dosing System-
110Providing and fixing of dosing system consisting one HDPE tank of 100 liters capacity .The Dosing of Chemical through Gravity with complete UPVC piping, valves, strainers & fittings.
111Application - Dosing of Lime at Flash Mixer Tank to balance the pH of effluent during reaction.
112Dosing Tank MOC - HDPE
113Make of HDPE tank - Plasto/ Ganga/ Sheetal
114Coagulant Dosing System
115Providing and fixing of dosing system consisting one HDPE tank of 100 liters capacity .The Dosing of Chemical through Gravity with complete UPVC piping, valves, strainers & fittings.
116Application - Dosing of coagulant like Alum/ PAC/ Ferrous Sulphate/ etc to the Flash Mixer tank to aggregate the impurities and suspended soilds and precipitate it.
117Dosing Tank MOC - HDPE
118Make of HDPE tank - Plasto/ Ganga/ Sheetal
119Focculant Dosing System
120Providing and fixing of dosing system consisting one HDPE tank of 100 liters capacity .The Dosing of Chemical through Gravity with complete UPVC piping, valves, strainers & fittings.
121Application - Dosing of Flocculant like polyelectrolyte to the Flocculation tank to aggregate the flocs into larger/ heavier flocs.
122Dosing Tank MOC - HDPE
123Make of HDPE tank - Plasto/ Ganga/ Sheetal
124Complete Air Diffusion System including Air Blower (Common for both STP and ETP Plant
125Air Blower for both STP and ETP
126Twin Lobe Rotary type Air Blowers capable of delivering of free air driven through “V” belt or directly coupled through flexible coupling to a TEFC motor of suitable HP, for 415 ± 10% volts, phase, 50 cycles A/C supply. Including foundation and foundation bolts work. Single Phase.
127Application: For suplying of air to Equalisation/ Aeration Tank/ Flash Mixer/ Flocculation Tank/ Chemical Dosing Tanks.
128Quantity - 02 Nos (1W + 1S)
129Pressure - 0.5kg/cm2
130Capacity - Upto 130 m3/hr
131Make- Akash/Beta/Airvac
132Air Dispersion System
133Non Clog Tubular Type Air Dispersion System capable of handling 3-5 cfm of Air with Oxygen Transfer efficiency of 3-4% per meter water depth. Air dispersion grid shall be assembled in modular form so that they can be replaced / repaired easily from platform at the top. (fine bubble membrane diffusers)
134Application : Air dispersion system shall be provided to transfer the air to Equalization tank/ Aeration tank/ Flash Mixer/ Flocculation Tank/ Chemical Dosing Tanks.
135Course Bubble Diffusers
136Diameter-150mm
137Type-Disc
138Moc-EPDM
139Application- To mix sewage in equal proportion (Homozonised Mixture)
140For Equalization Tank (Course Bubble Diffusers)
141For Flash Mixer/ Flocculation tanks (Course Bubble Diffusers)
142For Sludge Holding Tank (Course Bubble Diffusers)
143Fine Bubble Diffusers - For Moving Bed Bio-media Reactor (MBBR Tank)
144Diameter-63mm
145Length- 610mm
146Type- Cylinderical shape
147Application- Transfer the Oxygen/ Air to aeration tank to kill mocrobs, reduce BOD level and also mentain MLSS level.
148Moc-EPDM/Cilicon
149Media
150MBBR Media for STP
151Providing MBBR/ FAB media to be installed in MBBR reactor alongwith suitable sludge removal arrangement either by sludge transfer pump or air lifting pumps.
152MOC-PVC
153Type- Bio Pack Media
154Application- To enhance surface area and Maintain MLSS level
155Tube Deck Media for both STP and ETP
156Providing suitable PVC tube deck settling media to be installed in Secondary Tube Setller tank alongwith suitable sludge removal arrangement either by pumps or air lifting pumps
157Application- To separate liquid and solid part in tube Settler tank
158Purpose: For Better Settlement of Sludge
159Length- 750 mm
160Type- Hexagonal chevron
161MOC- PVC
162Filtration Unit Common for both STP and ETP Plant
163Filter Feed Pump
164Providing Horizontal centrifugal non clog water pumps with CI casing and CI Impeller along with motor, pressure gauge with isolation valve, NRV on delivery line, stainer (with by-pass) at suction. Mechanical seal, suitable vibration elimination pads of approved design, for the pump. The pump shall be suitable for 415±10% volts Three phase AC supply. Including foundation bolts
165Quantity - 02 Nos (1W + 1S)
166Capacity : Upto 4 M3/Hr
167Type of Pump : Monoblock
168Head :25-30Mtr
169Make - CRI/ Kriloskar/ Lubi
170Multigrade Sand Filter Unit (MGF)
171Vertical Filter with adequate dirt holding capacity (suitable for 3 Kg/Sq cm operating pressure). Vertical filter As per manufacturer's specifications complete with initial charge filter media including. The filter shall also be provided with set of internals for raw water inlet and bottom collecting system. Complete with frontal piping (UPVC/ SCH-40) and Multiport valves designed
172To remove the total suspended solids, dirt, iron and reduce silt density index which can foul the membranes
173Quantity - 01 Set
174MOC - FRP (Poly Glass)
175Dia - 21 inch
176HOS - 62 inch
177Type - Top/ Bottom Mounted
178Operationals- Manual
179Media - Sand Media, Pebble, Gravel
180Media Quantity - As per required
181MPV Make - Inititive/ Midas
182Activated Carbon Filter Unit (ACF)
183Vertical Filter with adequate dirt holding capacity (suitable for 3 Kg/Sq cm operating pressure). Vertical filter As per manufacturer's specifications complete with initial charge filter media including. The filter shall also be provided with set of internals for raw water inlet and bottom collecting system. Complete with frontal piping (UPVC/ SCH-40) and Multiport valves designed
184Application : To remove the Color and Odour.
185Quantity - 01 Set
186MOC - FRP (Poly Glass)
187Dia - 21 inch
188HOS - 62 inch
189Type - Top/ Bottom Mounted
190Operationals- Manual
191Media - Activated Carbon, Pebble, Gravel
192Media Quantity - As per required
193MPV Make - Inititive/ Midas
194Hypo Dosing System for disinfection of treated water.
195Providing Hypo/Chlorine Dosing System consist 100 ltrs HDPE tank with 0-6 lph electronic metering pump.
196Cap- 0- 6LPH
197Application- To kill Bacteria, viruses etc (As a disinfectant)
198Dosing Tank Make- Plasto/Ganga
199Dosing Pump Make- E Dose/Equil
200Note - Fresh water line upto dosing tank (in client scope)
201Sludge Dewatering System (Common for STP and ETP Plant)
202Poly Dosing System
203Providing polyelectrolyte Dosing System consist 100 ltrs HDPE tank with 0-6 lph electronic metering pump.
204Capacity- 0-6 LPH @ 2.5kg pressure
205Application- For Making Sludge thick.
206Dosing Tank Make- Plasto/Ganga
207Note - Fresh water line upto dosing tank (in client scope)
208Filter Press Feed Pump/Screw Pump
209Providing Positive Displacement type Screw Pump or Sludge Feed Pump for Sludge feed from Sludge Holding tank to Filter press, V belt motor derive.
210Flow rate - Upto 1 m3/hr
211Head - 30-35 Meter
212MOC-CI
213Application- feed sludge from sludge holding tank to filter press unit
214Make- Miniflow/ Eq
215Filter Press Machine-
216Providing Filter Press for suitable capacity of STP, including filter press of Suitable Capacity with CI frame, PP plates complete with filter cloth complete with interconnecting piping, taps and drainage collector pipe system.
217No. of Plates- 17 Nos
218Plate Size - 18 inch
219MOC- MS
220Type- manual operation
221Application- To make dry sludge
222Instrumentation common for both STP and ETP Plant
223Flow Meter (Digital)
224Providing & fixing of Flow Meter mounted at final treated water line to record the outlet flow.
225Size- 1 inch
226Type- Digital
227Application- To measure final treated water.
228Make- Aster/ Eq
229Float Sensor
230Providing & fixing Electronic Type Level Indicator and Controller for Automatic Operation of the complete system with high/low level alarm complete with auxillary NO/NC contacts.
231For required tanks
232Application : For required tanks
233Make :Aster/ Eq
234Pressure Guages
235Providing and fixing Pressure Guages in STP System to making the installation complete.
236MOC-SS
237Range- 0-7kg/cm2
238Size- 1 inch
239Application- To calaculate Pressure for each unit in STP & ETP system
240Make- Hguru/ Eq
241Piping & Fitting for both STP and ETP Plant
242MSEP Piping & Fitting for Non Submerged Air Blower Line (for STP)
243MSEP Header with piping and fitting in MS is completed with fittings such as tees, Butterfly valves, crosses, sockets, elbows & making good.
244Size of header - 3/ 4inch
245Size of MS Pipe- 1/ 1.5/ 2/ 2.5 inch
246MOC- MS
247Application- For Maintaining air Pressure after blowing Air in UPVC Pipelines to Equalization tank, Aeration Tank, Sludge Holding tank
248Make MS - Jindal/tata
249UPVC Pipe & Fitting (for STP and ETP)
250Providing and fixing all piping (as described below) and isolation control valves for making the system complete.
251MS Header for ETP: MS Header for airblower
252uPVC : Submerged air piping
253uPVC : Air blower line after MS Header (Non submerged)
254UPVC Pipe : Interconnecting pipe line after delivery header of pump/ filter
255UPVC/PVC Pipeng : Pumped sewage (submerged) & tank overflow pipe line
256Make- UPVC - Ajay/ Prince
257Centralized Electrical Control Panel (Common for both STP and ETP Plant)
258Design, Fabrication, Assembling, Wiring, Supply, Installation, Testing and Commissioning of Motor Control Centre shall be Fabricated out of 16 Gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and/or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Galvanised hardware with zinc passivation shall be used in fabrication of panels.
259Incoming (1 no.)
26032 Amps TPN Load break Isolator with the following accessories:
261A set of 0-240 volts 96 x 96 mm square digital electronic voltmeter with selector switch shall be protected by suitable MPCBs
262A set of 0-32 amps 96 x 96 mm square digital electronic ammeter with selector switch and 200/5 Amps 5VA CL: 1 CTs.
263A set of R.Y.B. Phase indicating lamps shall be protected by suitable MPCBs
264Notes:
265All MCBs shall be of 10 KA breaking capacity and suitable for motor duty application.
266All motor starter shall be provided with Automatic level controller.
267Provision shall be made for providing potential free contacts to all pumps starters for connection to BAS
268MCC- STP & ETP as described above
269Installation/Commissioning and Training
270CABLE & Wiring with Cable Trays Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56759168
AUTHORITY Government Departments
TENDER VALUE 1.02 Crore
LAST DATE 10-08-2026
Authority
Authority Name Uttar Pradesh Small Industries Corporation Limited
Work Description Tender for Construction Of 50 Kld Capacity Stp And 10 Kld Etp In Esi Hospital Bhopal
Basic Detail
Tender No 95/CE/26-27
Bidding Type Tender
Location
City Bhopal
State Madhya Pradesh
Key Dates
Publish Date 30 Jul 2026
Submission Date 10 Aug 2026
Open Date 11 Aug 2026
Finance
Tender Value 1.02 Crore
Tender Fee 2425
EMD 1.02 Lakhs
Exemption Not Available
Document List
8693620d-af05-4aaf-a2e3-72e162598cee.html
BOQ_2204446.xls
NITSTPandETPESICHospitalatBhopal.pdf
Tendernotice_1.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 30, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Aug 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

8693620d-af05-4aaf-a2e3-72e162598cee.html

xls

BOQ_2204446.xls

pdf

NITSTPandETPESICHospitalatBhopal.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders