Tender For Repair And Maintenance Related Civil Works In Indira Priydarshini Auditorium
Tender Value
50 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
8 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chittorgarh → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Related Civil Works In Indira Priydarshini Auditorium
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying un-reinforced, plain cement concrete mix with Concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints etc including all material, labour, machinery, lighting, guarding and maintenance of diversion. PCC M-25 |
| 2 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red / Chocolate Colour) Above 3601 Cm2 Slabs |
| 3 | P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufacture) with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grouting the joints with white cement and matching pigment etc complete. Size 600 mm X 600 mm |
| 4 | Providing and fixing of precast concrete interlocking tiles of desired shape of M 30 grade manufactured from fully computerized automatic stationery hydraulic vibrio pressed machine and fully computerized automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer in-charge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. Tensile splitting strength, abrasion and braking load etc. as per BS 6717:2001, Grey cement. 100mm thick |
| 5 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 6 | Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification. Two or more coats on new work. |
| 7 | Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thick 12 mm thick Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked. |
| 8 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formaldehyde resin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure 'A' : Decorative teak veneer both side |
| 9 | Providing and fixing precast cement concrete M-20 grade (Using mechanical Concrete Mixer) kerb stone top and bottom width 115 and 165 mm respectively, 250 mm high on 150 mm thick PCC M-10 grade foundation as per design, including fixing at site as per clause 408 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 10 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. |
| 11 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. |
| 12 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. |
| 13 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 14 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 15 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia. nominal bore |
| 16 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 25 mm dia. nominal bore |
| 17 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 15 mm dia. nominal bore |
| 18 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 25 mm dia. nominal bore |
| 19 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore. |
| 20 | Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. |
| 21 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 22 | Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cut-outs made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in-charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I, |
| 23 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 24 | Painting one thin coat with white lead of approved brand and manufacture on wet or patchy portion of plastered surfaces |
| 25 | Providing & fixing of double leaf acoustic doors made using 75 mm thick seasoned hard wood hollow framing tilled with 75 mm x 32 kg/m3 density Ecouse fiber glass wool fixied with 8 mm GWP & Termite resistant ply wood on both sides finally pasted with veneer on both sides duly polished using PU spray Polish having automatic drop seal with neoprene seal consisting of peripheral approved neoprene jamp seals all around on 150 mm wide Sal chowkhat with small 150 mm x 150 mm glass window, with complete hardware including steel Panic bar lockhinges with ball bearings latches, lock 1500 mm long metal handles on both sides etc complete in all respect and as directed by the consultant. The Chowkhat will be finished with teak wood lipping on all sides duly polished All hardware fittings veneer and polish shade and finish will be as per consultants drawings & instractions. The polish shade and finish will be as per consultant And as instruction given by site encharge Engineer and as per enclosed drawing. |
| 26 | Providing and fixing flocked carpet flooring having a straight Nylon 6.6 pipe, fixed using flock adhesive to a backing of non woven fiberglass net on PVC backing having a thickness of 4 mm suatable commercial use roll width 2.0 m roll length 30 m, weight 1.8 kg/m2 Abrassion resistance to>1000 cycles as per EN 1307 annex F having very low slip restance Acoustical performance as per EN ISO 717-2 confirming to EN 14041, suitable for wet cleaning using wet vaccum cleaner duly pasted to the ready floor base as per on manufactures pepecifications. The shade & design of the carpet will be confirmed by the consultant and intruction given by site Engineer Incharge. |
| 27 | Supply, Installation, testing & commissioning of Tip Up Type Cinima Chair high back and headrest are Must be made From generous super-soft, deep cushioned foam and fibres, creating a superior seating position. chair operates without the need for electric motors, Width (Out to Out) - 60 CM Height - 101 CM Overall Depth - 64 CM Auto tipup Seat mechanism 14 gauge and 16 gauge with no disturbing noise All the metal parts will be black powder coated Fully upholstered Arms along with Foam backing and with CupHolder Piping in contrast color High Density Foam Seat. Back with high quality conjugated siliconized polyfill for excellent in comfort and best in slider class. Seat chase with super softy foam for sunkin feeling while seated for best comfort during long hours. High quality Nylon Nivar webbing in seat for best resilience. Colour selct by Engineer inchage Quoted price Mustbe include all related hardware and Acessorys Make :- Godrej, Wipro, Relaxin .as per engineer in charge |
| 28 | Supply and Installation of Woody wool Fabrico of black colours Kerf edge, Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, installed by using H-spline against wall to perfect fit.Panels shall be backlined with acoustical infill of Echowool 10x25mm thick adhered to the wall using adhesive (surrounding wall of stage).as per engineer in charge |
| 29 | Wall Sides & Back - upto 2.00 m (Lower reach), Product: Woody Flute 27.19x2) + 25.11 ) x 2.00 Supply & installation of Woody Flutes, made of pinewood E1 grade, fiberboard, Melamine laminated finish, groove Flutes F16-2 - (2mm grove @16mm pitch) , tongue-groove edge for a seamless look, FR grade, of size 128x2440x20mm thick having base density 800Kg/m3, weight 12Kgs/m2 installed by using GI strut system.Framing The GI strut system includes GI Ceiling Section (CS 25) having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically at every 600mm centers. Aluminium core Flute Acceseries (FA18) having thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & centre brackets is then fixed perpendicular to the CS 25 with the help of fasteners at every 450mm centers. Woody Flutes of size 128x 2440x16mm in then fixed perpendicular to FA18 with suitable edge & centre clips. Expansion joints of 3mm at every 5mtrs bothways should be provided.Frame cavity insulation Panels shall be backlined with acoustical infill of Echo Wool 10x25mm thick adhered to the wall using adhesive.as per engineer in chargeFabric of width 1400mm is then aligned to the Stretch tracks by following the fabric thread line or pattern. The fabric is stretched and tucked into the Gripper tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module wall fabric width would be 1300mm.as per engineer in charge |
| 30 | Wall Sides and Back - Above 2.00 m , Product: Stretch Insitu 40mm thick System (27.19x2) x 9.29) + (25.11x 6.80) Supply and installation of Stretch In situ Fabric, wall fabric system by using of size 1400mm width , shall be stretched by using wooden base 15mm thick, 30mm wide plywood strip, Grippers 15mm (GP15)Tracks, 25mm thick Woodywool board and 10 mm thick Echowool infill with requisite accessories & tools. Woodywool square edge magnesite bonded pinewood fiber panels of size 600x1200x25mm having density 400kg/m3, weight 7.20 kg is fixed over GI Frame work with suitable fasteners. Echowool 10x10mm thick adhered on Woodywool panel by using adhesive.Fabric of width 1400mm is then aligned to the Stretch tracks by following the fabric thread line or pattern. The fabric is stretched and tucked into the Gripper tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module wall fabric width would be 1300mm.as per engineer in charge |
| 31 | Supply and installation of wooden proscenium in front of stage Construction of frame work Proscenium frames are fabricated by using metal tubular section of 100 x 50 x 2mm thick fixed to form a square grid of size 600 x600mm. Proscenium width shall be minimum 5meters (walls) along the sides and minimum of 1.5mtrs drop from the false ceiling Frames are grouted to stage floor/wall by using suitable fasteners.Cavity Filling Boarding Proscenium frame is then covered with 12mm thick plywood from both sides and covered with 1mm thick laminate, finished with polish of approved shade.. as per engineer in charge |
| 32 | 2 seater sofa with fabric finish for stage |
| 33 | Supply installation testing & commissioning 65x15 thick 2nd class Teak wood plants flooring with Tongue and Groove Joints (concealed screwing) over 50 x 50mm section Sal wood framing @ 600mm c/c in both directions with 12mm thick commercial ply (Green or eq.) The framing to be filled with 50 mm thick fiberglass resin bonded insulation of density 24 kg/cum. Malamine polishing of teckwood on exposed surface.In horizontal/Vertical plane (Rate for flooring shall includeproviding additional framework required for housing microphone and power outfit junction boxes includeing providing and fixing hinged 15mm thick teakwood civer for the junction boxes |
| 34 | SITC of MAINCURTAIN made out of velvet curtain cloth with horizontal sliding arrangement complete with fixing curvedrails, brackets, sliding arrangement & motorised operation complete with runners, masterrunners, pullies, 3mm steel wire rope, 1HP motor (Crompton) 2nos. air breaker contactors (L&T/SIEMENS), 2nos. micros witches for auto stop, 3nos push buttons for forward, rever seand stop positions. The curtain should be draped to half area when in closed position. Minimum over lapat centre should be 900mm and should be stitched in double gathering, with Main Frill. Make: Modern Stage Service/Stage Technologies/Waagner-Biro/Shiva Stage Light etc. |
| 35 | SITC of CENTRECURTAIN made out of glazed cotton cloth with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement & motor is ed operation complete with runners, master runners, pullies, 3mm steel wirerope, 1HP single phase motor (Crompton) 2nos. air breaker contactors (L&T/SIEMENS), 2nos. micro switches for auto stop, Dual 3nos push buttons for forward, reverse and stop positions. The curtain should be draped to half are awhenin closed position. Minimum over lapatcentre should be 900mm and should be stitched in double gathering. Make: Modern Stage Service/Stage Technologies / Waagner-Biro/ Shiva Stage Light etc. |
| 36 | SITC of REAR CURTAIN made out of glazed cotton cloth with horizontal sliding arrangement complete with fixing rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP single phase motor (Crompton) 2nos. air breaker contactors (L&T/SIEMENS), 2nos. micro switches for auto stop, Dual 3 nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900 mm and should be stitched in double gathering. Make : Make : Modern StageService / Stage Technologies / Waagner-Biro etc. |
| 37 | SITC of Providing and fixing average frills made out of double gathering glazed cotton cloth to be installed above the stage on 40 mm dia dual barrel MS pipe duly powder coated/Painted with manual hoist system . Make : Modern Stage Service / Stage Technologies / Waagner-Biro/ Shiva Stage Light etc. |
| 38 | SITC of CYCLORAMA CUM SCREEN :- Cyclorama Screen in Plastic Perforated /Plain Material. The screen to be fixed on tubular frame made out of 40mm dia MS pipe and Cross MS Pipe 25mm dia (custom). SIze 1400mm*6500mm Make of screen : Galalite / Dalite / Rosco/Shiva Stage Light etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 31, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysAug 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender