Tender For General -Sabarimala Devaswom - Supply, Fabrication, Erection, Testing And Commissioning Of Water Treatment Plant, Relocation Of Existing Condensate Tank, Repositioning Of Aravana Preparation Dish Pans, And Rearrangement Of Steam And Conden
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Aug 2026
5 days left
EMD
50000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathanamthitta → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General -Sabarimala Devaswom - Supply, Fabrication, Erection, Testing And Commissioning Of Water Treatment Plant, Relocation Of Existing Condensate Tank, Repositioning Of Aravana Preparation Dish Pans, And Rearrangement Of Steam And Condensate Lines For The Newly Installed Standby Steam Boilers-Reg
BOQ
| Sl. No. | Item Description |
| 1 | Supply and installation of boiler feed water treatment system comprising of the following DUAL MEDIA FILTER, SOFTENER, and Feed water pump- Technical specifications as follows Water softner : Flow rate : 6 m3/hr Inlet/outlet size : 40 MM Dimensions : 550mm dia x2000 mm ht Resin qty : 400 Ltrs Type of valve : MPV, side monted Max working pr: : 3.5 kg/cm2 Max raw water hardness : 100 ppm Brine tank : 100 ltrs Pressure guage 0-7 kg/cm2 : 1 no |
| 2 | Supply and installation of boiler feed water treatment system comprising of the following DUAL MEDIA FILTER, SOFTENER, and Feed water pump- Technical specifications as follows Dual media filter Vessel MOC : FRP Flow rate : 6 m3 hr Inlet/outlet size : 40 NB Dimensions : 770mm dia x2070mm ht filter media : Anthracite, Fine sand, Quartx sand and pebbles Type of valve : MPV, Side mounted Max working pressure: 3.5 kg/cm2 Pressure gauge 0-7 kg/cm2 : 1 no |
| 3 | Supply and installation of boiler feed water treatment system comprising of the following DUAL MEDIA FILTER, SOFTENER, and Feed water pump- Technical specifications as follows Filter Feed water pump flow rate : 6000 LPH Head : 35 Mt |
| 4 | Supply, erection and fabrication of steam line, Fuel line. Water line, condensate, etc. ( Non IBR) with MS ‘C’ class pipe, including the charges for cutting, welding and grinding, etc. 80 NB |
| 5 | Supply, erection and fabrication of steam line, Fuel line. Water line, condensate, etc. ( Non IBR) with MS C class pipe, including the charges for cutting, welding and grinding, etc. 65 NB |
| 6 | Supply, erection and fabrication of steam line, Fuel line. Water line, condensate, etc. ( Non IBR) with MS C class pipe, including the charges for cutting, welding and grinding, etc. 50 NB |
| 7 | Supply, erection and fabrication of steam line, fuel line. Water line, condensate, etc. ( Non IBR) with MS C class pipe, including the charges for cutting, welding and grinding etc. 40 NB |
| 8 | Supply, erection and fabrication of steam line, fuel line. Water line, condensate, etc. (Non IBR) with MS C class pipe, including the charges for cutting, welding and grinding etc.25 NB |
| 9 | Supply, erection and fabrication of steam line, fuel line. Water line, condensate, etc. (Non IBR) with MS C class pipe, including the charges for cutting, welding and grinding etc.20 NB |
| 10 | Supply, erection and fabrication of steam line, fuel line. Water line, condensate, etc. (Non IBR) with MS C class pipe, including the charges for cutting, welding andgrinding etc.15 NB |
| 11 | Fabrication and erection of IBR steam line from each boiler to the PRS using IBR Sch:40 pipe, including all necessary fittings like bends, flanges, nut, bolt, High Quality Gaskets and Barrel Nipple etc. The rates include the charges for cutting,welding and grinding etc.50 NB |
| 12 | Fabrication and erection of IBR steam line from each boiler to the PRS using IBR Sch:40 pipe, including all necessary fittings like bends, flanges, nut, bolt, High Quality Gaskets and Barrel Nipple etc. The rates include the charges for cutting,welding and grinding etc.40 NB |
| 13 | Supply, fabrication and erection of flue gas duct made of 3mm MS sheet 250 mm dia with necessary flanges, bends all with 2 coats of heat-resistant aluminium painting. |
| 14 | Installation of Steam Separator with necessary flanges, gaskets, bends, including allcutting and welding charges, etc |
| 15 | Supply fabrication and erection of steam trap assembly comprising 15 NB T D trap, ball valves, flanges, 15 NB MS C class Pipes, nipples and nut bolt, etc |
| 16 | Supply, fabrication, and erection of auxiliary line using 25 NB ms C class pipe, bends, flanges, barrel nipples, nuts, bolts, and necessary gaskets, etc. |
| 17 | Supply, fabrication, and erection of safety valve outlet line using 40 NB MS C class pipe, bends, flanges, barrel nipples, nuts, bolts, and necessary gaskets, etc. |
| 18 | Supply, fabrication, and erection of economiser drain line using 15 NB MS C class pipe, bends, flanges, barrel nipples, nuts, bolts, and necessary gaskets, etc. |
| 19 | Supply, fabrication, and erection of blowdown line using 20 NB ms C class pipe, bends, flanges, barrel nipples, nuts, bolts, and necessary gaskets, etc. |
| 20 | Supply, fabrication, and erection of economiser air vent using 25 NB, 40NB,50NB,and 65NB MS C class pipe, bends, flanges, barrel nipples, nuts, bolts, and necessary gaskets, etc |
| 21 | Supply, fabrication and erection of structural supports for water tank, steam, water line and HSD tank, using MS channel, MS angle, etc |
| 22 | Supply and fixing of IBR steam pressure reducing valves with necessary valves,strainers, flange, nut, bolt, washer, high-quality gaskets, including cutting and welding consumables, etc.40 NB PRV IBR |
| 23 | Supply and fixing of IBR steam pressure reducing valves with necessary valves,strainers, flange, nut, bolt, washer, high-quality gaskets, including cutting and welding consumables, etc.40 NB Moitur separator |
| 24 | Supply and fixing of IBR steam pressure reducing valves with necessary valves,strainers, flange, nut, bolt, washer, high-quality gaskets, including cutting and welding consumables, etc.40 NB Steam Globe Valve F/E IBR |
| 25 | Supply and fixing of IBR steam pressure reducing valves with necessary valves,strainers, flange, nut, bolt, washer, high-quality gaskets, including cutting and welding consumables, etc.40 NB Y Srtainer IBR |
| 26 | Supply and fixing of IBR steam pressure reducing valves with necessary valves,strainers, flange, nut, bolt, washer, high-quality gaskets, including cutting and welding consumables, etc.65 NB Globe valve |
| 27 | Supply and fixing of IBR steam pressure reducing valves with necessary valves,strainers, flange, nut, bolt, washer, high-quality gaskets, including cutting and welding consumables, etc.40 NB Globe valve |
| 28 | Supply and fixing of IBR steam pressure reducing valves with necessary valves,strainers, flange, nut, bolt, washer, high-quality gaskets, including cutting and welding consumables, etc.25 NB Safety valve |
| 29 | Supply and fixing of IBR steam pressure reducing valves with necessary valves,strainers, flange, nut, bolt, washer, high-quality gaskets, including cutting and welding consumables, etc.Pressure gauge 0-25 kg/cm2 100mm dial, bottom connections with siphon & fittings |
| 30 | Supply and fixing of IBR steam pressure reducing valves with necessary valves,strainers, flange, nut, bolt, washer, high-quality gaskets, including cutting and welding consumables, etc.Pressure guage 0-10 kg/cm2 100mm dial, bottom coneections with siphon & fittings |
| 31 | Supply and fixing of valves, and fittings for water line, steam line, condensate line,fuel line, etc20 NB Float trap |
| 32 | Supply and fixing of valves, and fittings for water line, steam line, condensate line,fuel line, etc25 NB Steam ball Valve with SS Ball &Stem and Forged Carbon Steel Body PTFE seat S/E |
| 33 | Supply and fixing of valves, and fittings for water line, steam line, condensate line,fuel line, etc50 NB Cast steel ball valve scrwed end |
| 34 | Supply and fixing of valves, and fittings for water line, steam line, condensate line, fuel line, etc50 NB CI Y strainer |
| 35 | Supply and fixing of valves, and fittings for water line, steam line, condensate line, fuel line, etc40 NB Cast steel ball valve screwed end |
| 36 | Supply and fixing of valves, and fittings for water line, steam line, condensate line, fuel line, etc40 NB CI Y strainer |
| 37 | Supply and fixing of valves, and fittings for water line, steam line, condensate line,fuel line, etc25 NB Cast steel ball valve screwed end |
| 38 | Supply and fixing of valves, and fittings for water line, steam line, condensate line,fuel line, etc15 NB GM NRV |
| 39 | Supply and fixing of valves, and fittings for water line, steam line, condensate line,fuel line, etc3/8 x 40 Metallic braided hose with end fittings |
| 40 | Supply and fixing of valves, and fittings for water line, steam line, condensate line,fuel line, etc1/2 x20 Metallic braided hose with end fittings |
| 41 | Supply and fixing of valves, and fittings for water line, steam line, condensate line, fuel line, etc Pressure guage 0-20 kg.cm2/ 4\\" dial, bottom coneections with siphon & fittings |
| 42 | Supply and fixing of valves, and fittings for water line, steam line, condensate line,fuel line, etc20 NB steam safety valve 0-3. kg/cm2 |
| 43 | Supply and fixing of the automatic level control system for the HSD tank inside the boiler room. The scope of work includes Providing magnetic type float switch, solenoid valve, isolation valve etc with control panel |
| 44 | Dismantling and shifting the existing condensate tank for constructing the new boiler room- The work includes dismantling the pipes, pump, tank etc, shifting to the new location and providing condensate/drain line with pump |
| 45 | Labour charges for dismantling steam pipeline, condensate line valves, trap flanges and insulation etc |
| 46 | Charges for dismantling and re arranging dish type aravana preparation dish pan inside the existing aravana plant. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender