Tender For Supply, Erection, Testing And Commissioning Of Smart Features At Newly Proposed Smart Market Sector 46 Ward No-14 Under The Jurisdiction Of Municipal Corporation Gurugram
Tender Value
99.27 Lakhs
Estimated cost
Bid Submission
17 Aug 2026
17 days left
EMD
1.98 Lakhs
Bank guarantee accepted
Document Fee
15180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Erection, Testing And Commissioning Of Smart Features At Newly Proposed Smart Market Sector 46 Ward No-14 Under The Jurisdiction Of Municipal Corporation Gurugram
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Erection, Testing and Commissioning of Smart features at newly proposed smart market sector 46 ward No-14 under the Jurisdiction of Municipal Corporation Gurugram |
| 2 | Supply and erection of 2.5 sqmm 3 core unard FRLS PVC insulated ISI Marked copper conductor cable complete as per entire satisfication of engineer in charge.Make RR / Havells / Polycab/Grandley. 2.5 Sq. mm 3 Core Cable. |
| 3 | Providing trench less boring below existing road / pavement including laying of 65 mm dia GI pipe B class required to complete the job in all respect |
| 4 | Restoring the road cut, in level with the existing road surface, including preparation of subgrade laying and relaying of soiling and laying and consolidation of wearing coats to water bound macadam specification and laying 20mm thick premix carpet, on top including cost of tack and sealcoat complete in all respects... |
| 5 | Providing trench less cuttting by Hydraulic Drilling Device boring/ Manual OR through some suitable alternate method with insertion of HDPE Pipe including supply, Delivery of HDPE pipe at work site and laying of 50mm internal diameter HDPE pipe inside road for road corssing of cable by Hydraulic Drilling Device without opening of the road top surface, laid at a depth of at least 900mm below the road surface from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective street light pole including cost of all accessories for road crossing for laying of cables.. |
| 6 | Erection Testing and commissioning of Three phase CCMS panel petty material required for installation of ccms panel i.e clamp,nut and bolts,thimble ,wire etc complete in all material required for installation on PCC pole or Pedstal. complete in all material required for installation on PCC pole or Pedstal. |
| 7 | Providing and fixing of 4G/5G Sim Card and recharse fees per month for street lights CCMS panel Compelte in all respect required for proper operation of CCMS panel. 500 Nos x 60 |
| 8 | Defect liablity period for Replacement of burnt/faulty cables of various sizes 25 X 4 core and 50x4 core cable, HDPE pipe, felxible wire, MCB, MCCB, Earthing, etc., SPMCB, EPMCB, contractor, wiring and other item required for CCMS panel and Installation of material supplied by the M/s Surya Co. as per rate contract term and Condition i.e SPMCB, EPMCB, contractor, wiring etc and other item required for CCMS panel and maintaining the connectivity of CCMS panel with the GMDA/other portal through sim and removing of fault in ccms panel for 1st and 2nd year free of cost complete in all respect of 3rd year @6% of capital cost |
| 9 | Defect liablity period for Replacement of burnt/faulty cables of various sizes 25 X 4 core and 50x4 core cable, HDPE pipe, felxible wire, MCB, MCCB, Earthing, etc., SPMCB, EPMCB, contractor, wiring and other item required for CCMS panel and Installation of material supplied by the M/s Surya Co. as per rate contract term and Condition i.e SPMCB, EPMCB, contractor, wiring etc and other item required for CCMS panel and maintaining the connectivity of CCMS panel with the GMDA/other portal through sim and removing of fault in ccms panel for 1st and 2nd year free of cost complete in all respect of 4th year @7% of capital cost |
| 10 | Defect liablity period for Replacement of burnt/faulty cables of various sizes 10x3core,e and 25X 4 core cable SPMCB, EPMCB,contractor, wiring and other item required for CCMS panel and Installation of material supplied by the M/s Surya Co. as per rate contract term and Condition i.e SPMCB, EPMCB, contractor, wiring etc and other item required for CCMS panel and maintaining the connectivity of CCMS panel with the GMDA/other portal through sim and removing of fault in ccmspanel for 1st and 2nd year free of cost |
| 11 | Supply and erection of 4 mtr Pre-GI Pole with total height above ground level, having 4mm thickness, wherein the pole bottom section shall be 2000mm, square section of 200x200x4mm, and the upper section shall be 2000mm, square section of 150x150x4mm, with the top portion having a laser-cut highlighter design extending 300mm from the top with two-side reflection, and having a laser-cut MCG markup design extending 300mm with two-side reflection as per drawing. The pole shall be fitted with a Double-arm bracket of 150x150mm, 600mm long, with a street light of 60 watts on each side, forming a double-sided smart street light pole as per the attached detail drawing. The pole shall have provision for mounting arrangements of 200mm long, 32mm dia square section for a suitable camera up to 4 mtr from the bottom, as well as a suitable speaker at 3.5 mtr from the bottom, and shall be provided with a base plate of size 400x400x25mm. The pole shall have two lockable access windows at the bottom part — one for lighting purposes, extending up to 1900mm from the bottom, and the second for electronic items, extending up to 1000mm from the bottom — to accommodate a built-in connection box and facilitate maintenance, with the control gear tray prewired with MCB and terminal connectors for a loop-in/loop-out arrangement for camera and audio system including 2.5x3 sq mm copper wire for lights and ambient connections.The fitting shall be IP66 and IK10 rated, with lenses for beam angle as per IESNA Type II, wired with branded OSRAM/Lumiled/CREE/APT make LED and Fulham/Philips constant current driver, having efficiency greater than 85%, power factor greater than 0.9, temperature not exceeding 90°C, and THD less than or equal to 10%. The light output of the source shall be more than 130 lumens/watt with CRI greater than 80, surge protection of 5kV internal, and Fulham/Philips make SPD of 10kV external, operating voltage range of 140-270V, and lumen maintenance as per LM79, LM80, and L70 @ |
| 12 | Supply and erection of 4 mtr Pre-GI Pole with total height above ground level, having 4mm thickness, wherein the pole bottom section shall be 2000mm, square section of 200x200x4mm, and the upper section shall be 2000mm, square section of 150x150x4mm, with the top portion having a laser-cut highlighter design extending 300mm from the top with two-side reflection, and having a laser-cut MCG markup design extending 300mm with two-side reflection as per drawing. The pole shall be fitted with a Single-arm bracket of 150x150mm, 600mm long, with a street light of 60 watts on each side, forming a Single -_ sided smart street light pole as per the attached detail drawing. The pole shall have provision for mounting arrangements of 200mm long, 32mm dia square section for a suitable camera up to 4 mtr from the bottom, as well as a suitable speaker at 3.5 mtr from the bottom, and shall be provided with a base plate of size 400x400x25mm. The pole shall have two lockable access windows at the bottom part — one for lighting purposes, extending up to 1900mm from the bottom, and the second for electronic items, extending up to 1000mm from the bottom — to accommodate a built-in connection box and facilitate maintenance, with the control gear tray prewired with MCB and terminal connectors for a loop-in/loop-out arrangement for camera and audio system including 2.5x3 sq mm copper wire for lights and ambient connections.The fitting shall be IP66 and IK10 rated, with lenses for beam angle as per IESNA Type II, wired with branded OSRAM/Lumiled/CREE/APT make LED and Fulham/Philips constant current driver, having efficiency greater than 85%, power factor greater than 0.9, temperature not exceeding 90°C, and THD less than or equal to 10%. The light output of the source shall be more than 130 lumens/watt with CRI greater than 80, surge protection of 5kV internal, and Fulham/Philips make SPD of 10kV external, operating voltage range of 140-270V, and lumen maintenance as per LM79, LM80, and L70 @ |
| 13 | Supply, Erection, Testing and Commissioning of Smart features at newly proposed smart market sector 46 ward No-14 under the Jurisdiction of Municipal Corporation Gurugram Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender