Tender For special Repair Of Retaining Wall Infront Of Single Living Offrs Accn At Arunachal Scouts And Latrine Block (Lt-1 To Lt-13) At Transit Camp Of Age B/R And Age E/M Under Ge Tenga
Tender Value
33.70 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
3 days left
EMD
67400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kameng → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Retaining Wall Infront Of Single Living Offrs Accn At Arunachal Scouts And Latrine Block (Lt-1 To Lt-13) At Transit Camp Of Age B/R And Age E/M Under Ge Tenga
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floor and paving not exc 15 cm thick (below or above ground). |
| 2 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 3 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge , Gutter, Gable flashing, corner flashing etc, fixed with self tapping screws as specified and directed. |
| 4 | M&L for 25 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in floorings, as in sub base of floor tiles in ground floor complete all as specified and directed. |
| 5 | M&L for 15mm thick screed bed in CM 1:4 for laying floor tiles. |
| 6 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding .11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed. |
| 7 | M&L for 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection surface finished even and smooth using with extra cement complete all as specified and directed. |
| 8 | M&L for 10mm thick rendering in CM 1:3 finish even and fair for laying wall tiles. |
| 9 | M & L for 450 x 350 x 07 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed. |
| 10 | Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar |
| 11 | M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed. |
| 12 | M&L for precast cement concrete 1:3:6 type C1 using 20 mm graded aggregate block solid building blocks or slabs in not exc 10cm thick (with plain or interlocking joints as directed ) complete set in CM 1:4 complete all as specified and directed. |
| 13 | Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. |
| 14 | M & L 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 15 | M & L 15 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 16 | Dismantling of CI soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings. |
| 17 | S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls |
| 18 | S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls |
| 19 | S&F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm bore. |
| 20 | S&F PVC (SWR) bends any radius, 110mm bore |
| 21 | S&F PVC (SWR) bends any radius, 75 mm bore |
| 22 | S&F PVC (SWR) junction single, (single T) equal or unequal with access door 75mm bore. |
| 23 | S&F PVC (SWR) vent cowl 110 mm bore |
| 24 | S&F PVC (SWR) couplers 110mm bore. |
| 25 | S&F PVC (SWR) WC connector 110mm bore lip ring. |
| 26 | S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement. |
| 27 | Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store. |
| 28 | S & F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 29 | S & F in repairs ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified |
| 30 | Taking up or down 15 mm bore steel water tubing and connections including clfor refixing or removal to store |
| 31 | S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 32 | Taking up or down 20 mm bore steel water tubing and connections including cleaning or refixing or removal to store |
| 33 | S&F 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 34 | S & F in repair looking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 35 | S&F in repairs Wash basins, Vitreous China(flat back or angle back type) of size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified & directed |
| 36 | S&F PVC connections 15 mm size with PTMT nuts of length 450 mm. |
| 37 | Supply and fixing in repair vitreous China squatting pan, \\"Orissa\\" pattern size 580 X 440 mm, white, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and complete all as specified and directed. |
| 38 | S & F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete. |
| 39 | S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 40 | S&F in repair 15 mm dia stop valve external threaded,cast coppper alloy ,screwed down high pressure with crutch or butterfly handle ,screwed both ends for iron pipe or for uninos . |
| 41 | S & F in repairs 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed. |
| 42 | S & F in repairs 15mm dia Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specifed. |
| 43 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm. |
| 44 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.50 Sqm. |
| 45 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing. |
| 46 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat mouleded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rain, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supling & fixing in the frame at site as per specification & drawing. |
| 47 | S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete |
| 48 | M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 49 | S & F 30mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I section 8 clause 8.24(a) supplied and fitted to chowkhats |
| 50 | S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 51 | S/F 150 mm long aluminium anodised barrel tower bolts of extruded section. |
| 52 | S/F 150 mm long aluminium handles cast type anodised. |
| 53 | S & F 3mm thick figured glass, pin head glazing with oil putty /wooden beads in squares n exc 0.50 Sqm in each pane. |
| 54 | M&L for Two coats of cement base paint over a coat of primer on new wall surfaces including all necessary preperation of new wall surfaces wetting and curing, complete all as specified. |
| 55 | M&L for Two coats of acrylic distemper/ distemper oil emulsion (OBD) on new plastered wall surfaces of any description over a coat of alkali resistent priming paint all as specified including preperation of surfaces as specified. |
| 56 | M&L for Two coats of acrylic distemper/ distemper oil emulsion (OBD) on old wall surfaces including preparation of old plastered surface complete all as specified. |
| 57 | M&L for complete removal of existing treatment and appling two coat of cement base paint on wall surface complete all as specified |
| 58 | S&F CP towel rail 450mm long, fixed with chromium plated brass screws and wooden/ plastic cleats (Minimum wt 170 gms) |
| 59 | Demolition of stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as directed |
| 60 | M&L for walling of random rubble uncoursed (stone retrived from dismantling), well bonded,bedded and solidly hearted built in CM 1:6, complete all as specified and directed.NOTE: Stone retrived from dismantling/Demolition to be used for RR masonry. |
| 61 | M&L, for walling of random rubble uncoursed, well bonded,bedded and solidly hearted built in CM 1:6, complete all as specified and directed. |
| 62 | Extra over stone for hammer dressing with maximum depression on face of stone wall and dressing of face bed and joints of random rubble walling , uncoursed or brought upto courses not exceeding 40 mm depression complete all as specified and directed . |
| 63 | M & L for hand packing with broken stone/ boulder behind backing of retaining wall,in layers etc complete all as directed |
| 64 | Demolition of cement Concrete(unreinforced) of any description and in any position not otherwise specifically provided for,complete all as specified and directed. |
| 65 | M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate ) as in foundation bed concrete, complete all as specified and directed. |
| 66 | M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, complete all as specified and directed . |
| 67 | M&L for raised pointing to random rubble masonry , unsourced or brought upto courses in CM 1:4, complete all as specified and directed. |
| 68 | Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches (Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 69 | Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. |
| 70 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. |
| 71 | Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed. |
| 72 | Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed. |
| 73 | S&F LED lamp 9 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). |
| 74 | Supply and fix exhaust fan,steel body AC single phase, 230V of size 250mm sweep heavy duty with blades, and frame and louvers complete all as specifed and directed. |
| 75 | Supply and fix sheet metal enclosures for DBs,double door when MCBs to be used 230 volts 12 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 76 | Supply and fix sheet metal enclosures for DBs,double door when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 77 | S&F MCB SPN having braking capacity 10KA, 40-63 Amps, 240 V complete all as specified and directed. |
| 78 | S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 V complete all as specified and directed. |
| 79 | S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed. |
| 80 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
| 81 | S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 6 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 6 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run.) |
| 82 | Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric cables with stranded aluminium conductor, 1100 volts grade, of 10 Sqmm 2 core inclduing protection pipe where required complete all as specified and directed. |
| 83 | Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/ cables/ poles/fencing posts etc and getting out complete all as specified and as directed. |
| 84 | Returning filling in any type of soil including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed. |
| 85 | Removing excavated soils to a distance n.exc. 50 mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed. |
| 86 | M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particals in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shall be measured 18 cm after punning. |
| 87 | Supplying and laying un-reinforced precast concerete cable cover, class LV, type 1 flat size 250mm x150mm x 40mm for cable protection , laid flat ie length of cable cover shall be laid across the cable all as specified and directed |
| 88 | Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc) |
| 89 | Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC. |
| 90 | Taking down sub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender