Tender For Renovation Of Entrance Lobby Of The Hop Office, Teesta-Vi H.E. Project At Ground Floor Of Administrative Building Of Teesta-V Power Station, Balutar, Sikkim.
Tender Value
19.92 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
20 days left
EMD
40000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sikkim → Sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Entrance Lobby Of The Hop Office, Teesta-Vi H.E. Project At Ground Floor Of Administrative Building Of Teesta-V Power Station, Balutar, Sikkim.
BOQ
| Sl. No. | Item Description |
| 1 | A) CIVIL WORKS |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: In cement mortar. |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead : For thickness of tiles 10 mm to 25 mm. |
| 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of area 3 sq. metres and below |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : of area beyond 3 sq. metres. |
| 7 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 8 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 coarse sand) |
| 9 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 10 | Providing and Laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1 cement and 5 clean coarse sand) as per the direction of Engineer in Charge including curing etc all complete. |
| 11 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1cement and 4course sand) including carriage of bricks upto work site, curing etc all complete. |
| 12 | Providing and Laying 12mm thick cement plaster of specified mix with Recorn 3S having a fiber length of 4.8 mm ( 100 gm /bag of cement) in single coat including finishing even and smooth and curing complete . 1:4 mix. |
| 13 | Providing and Laying 15mm thick cement plaster of specified mix with Recorn 3S having a fiber length of 4.8 mm ( 100 gm /bag of cement) in single coat including finishing even and smooth and curing etc all complete.1:4 mix. |
| 14 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size) |
| 15 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size - Size of Tile 600 x 1200 mm |
| 16 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm |
| 17 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm |
| 18 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily., in tread of stair (Tiles of mat finished 30x120 cm size) |
| 19 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete., in riser of stair (Tiles of mat finished 20x120 cm size) |
| 20 | Providing and laying full body Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily., in landing of stair (Tiles finished 60x120 cm size) |
| 21 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/ Ruby red. Area of slab over 0.50 sqm |
| 22 | Providing and laying Vitrified Glossy Tiles for wall lining over 12 mm thick bed of cement mortar 1:3 tiles in wall of 60 x 120 cm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily including pointing in white cement complete. (Based on Market rate, DAR 2023 8.9.1 ) |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 24 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer |
| 25 | Providing and Providing and painting with plastic Emulsionpaints one or more coats on old surface of required shade to give even shade in- including brushing the surface clean of all dirt, dust and smoothened by sand paper etc complete. |
| 26 | Providing and distempering with oil bond washable acrylic distemper on old surface of approved brand and manufacture to give an even shade including preparation of surface etc complete. |
| 27 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,, excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks) |
| 28 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,, excluding the cost of painting with : PVC ceiling board with different size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification. |
| 29 | Providing and installation of wall panelling made of Timber (Pinewood or equivalent) panel (Tongue and Groove panelling) with minimum size of 127 x 12 mm with Furring Strips as framework system with provision of wainscotting at the top and skirting and base shoe at the bottom with necessary nails, screw ,etc including varnishing on the finished surface all complete as per drawing and direction of the Engineer incharge. |
| 30 | Providing and fixing anodized aluminum works for doors, windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, Al snap beading for glazing / paneling CP brass / stainless screws, all complete as per design and drawings and the direction of the Engineer - in - Charge. |
| 31 | Providing and fixing glazing in Al. doors and windows ventilaor shutters and partitions etc. with PVC / neosprene gasket with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in- Charge. |
| 32 | Providing, fitting and fixing of dressed local timber (tooni, katusequivalent) in all types of frames complete. With locally available timber |
| 33 | Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete. 32mm |
| 34 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). (6mm thick commercial plywood) |
| 35 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. (1mm thick mica) |
| 36 | Providing, fitting and fixing. Tower bolts 250x10mm with necessary screw etc complete. Brass (Bright Finish)) |
| 37 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. Size 250x16mm Brass (bright Finish) |
| 38 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete. MS |
| 39 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete : 100 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 40 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. (i) 75 mm dia. PRINCE / SUPREME or equivalent soil pipe |
| 41 | Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes. 100 mm dia. Supreme / Prince |
| 42 | Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes. 75 mm dia. Supreme / Prince |
| 43 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan W.C. pan European Bidets constellation CAT NO 30006 |
| 44 | Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE 55 cm x 40 cm |
| 45 | Providing, fitting and fixing white vitreous white china counter top wash basin of size 480 x 365mm complete including cutting and making good the walls wherever required and as per direction of Engineer in charge. |
| 46 | Providing, fitting and fixing white vitreous white china Urinal (size 375cmx390cmx590cm) complete with CP waste coupling, cutting and making good the walls wherever require. |
| 47 | Providing, fitting and fixing Straight 8mm thick frosted glass Urinal Division - Wall Hung (Size 450/300mm Ht. 900mm) including all fittings and making good the walls wherever require. |
| 48 | Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets (600x450) ground and fixed to timber cleats with CP screws, washer etc complete. |
| 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall - 20 mm nominal outer dia Pipes. |
| 50 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. - 15 mm nominal outer dia Pipes. |
| 51 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL). (i) BIB COCK 15 MM DIA |
| 52 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL). (ii) STOP COCK 15 MM DIA (CONCEALED WORKS) |
| 53 | Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL). (iii) CONNECTING PIPE |
| 54 | Providing and fixing PTMT grating of approved quality and colour - Circular type - 100 mm nominal dia |
| 55 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge |
| 56 | Providing and fixing hand shower (health faucet) of approved quality & make as per the direction of Engineer-incharge |
| 57 | Providing, fitting & fixing of AUTOMATIC SLIDING DOOR SYSTEM (Model - SP GSD - 200-5) consisting of Aluminum Base Plate Track (with 2nd rail) 4.2 Meter, Motorized,1 sets of Rack Belt ( 7000 mm ), 2 pcs Motion Sensors, ,1 pc remote key , 1 Pair Photo Beam Sensor etc, 1 Pair Floor Guide & accessories and including Installetion and delivery, 12mm taughen glass (saint gobin), Glass delivery charge with loading unloading, Fixed glass fixing and installation charge, Hole and fixer fitting charges complete as per the direction of Engineer-in-Charge. |
| 58 | B) ELECTRICAL WORKS |
| 59 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. |
| 60 | (i) GroupC |
| 61 | Wiring for 16 A plug point with 2X2.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quqlity in best quality reccessed alkathine pipe and earthing the point with 1X2.5 sqmm HRFRLS PVC insulated Copper Conductor single core cable as required. |
| 62 | Wiring for sub main light/fan/call bell/& 6A plug pointwith 2X2.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quqlity in best quality reccessed alkathine pipe and earthing the point with 1X2.5 sqmm HRFRLS PVC insulated Copper Conductor single core cable as required. |
| 63 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. |
| 64 | (i) 12 Module (200mmX150mm) |
| 65 | (ii) 8 Module (125mmX125mm) |
| 66 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 67 | (i) 5/6 A switch |
| 68 | (ii) 3 pin 5/6 A socket outlet |
| 69 | Supply and fixing two module stepped type electronic fan regulator on the existing modular plate swich box including connections but excluding modular plate etc.as required. |
| 70 | Supplying and fixing Modular Blanking Plate on the existing blanking Plate & Switch Boxes exluding modular plate as required. |
| 71 | Supply and fixing Surface LED fitting 12 watts including connection etc as required |
| 72 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 73 | Supply,Installation, testing and commissioning of ceiling fan 1200 mm with complete accesaries including connection as required |
| 74 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored |
| 75 | Supply and fixing wall mounting mirror light including connection etc as required |
| 76 | Supply,Installation, testing and commissioning of ventilation fan 250 mm with complete accesaries including connection as required |
| 77 | Supplying and inatallation of MCB Distribution Board Double/Single door (confirming to CPWD/NBC/Relevent IS&BIS Code) |
| 78 | (i) 12 Way SPN (Single Door) |
| 79 | Supplying,inatallation,Testing & commissioning of Miniuature Circuit Breaker(confirming to CPWD/NBC/Relevent IS&BIS Code) |
| 80 | (ii) Single Pole 6-32 amp Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender