Tender For Hvac & Lift Work Of Proposed Regional Office Building For Pollution Board At Dehradun.
Tender Value
75.99 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
12 days left
EMD
1.52 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Hvac & Lift Work Of Proposed Regional Office Building For Pollution Board At Dehradun.
BOQ
| Sl. No. | Item Description |
| 1 | VRF SYSTEM |
| 2 | OUTDOOR UNIT |
| 3 | Supply Installation, Testing & Commissioning of modular typeVariable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules, microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP atAHRI conditions shall not be less than 3.1 and IEER not less than 6.5. |
| 4 | INDOOR UNIT - CASSETTE |
| 5 | Supply, installation, testing and commissioning of followingminimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree CWB temperature. |
| 6 | 1.6 TR |
| 7 | 2.4 TR |
| 8 | INDOOR UNIT - HIGH WALL TYPE |
| 9 | Supply, installation, testing and commissioning of followingminimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. |
| 10 | 1. TR |
| 11 | 1.45 TR |
| 12 | COPPER REFRIGERANT PIPING |
| 13 | Supply, Installation, testing and commissioning includingvaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : |
| 14 | 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 15 | 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 16 | 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 17 | 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 18 | 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 19 | 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 20 | 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 21 | 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation |
| 22 | DRAIN PIPING |
| 23 | Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge |
| 24 | 25 mm outer dia pipes. |
| 25 | 32 mm outer dia pipes. |
| 26 | Supplying & laying of 3x1.5 sqmm armoured cable( to be used as control cabling),600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required |
| 27 | Design Supply Installation Testing and Commissioning of 8 Passenger Machine Roome Less Lift capacity 544 KG, Gearless, Glass doors, 1 meter/sec, No. of landing and opening/stops - 5 , simplex, operation Collective Selective (Full Collective), drive type STANDARD - V3F, car door type AUTO 2 PANEL CENTER OPENING (ACO 2P), CAR ENCLOSURE SS Hairline - Standard, Glass Door-With Frame SS Hairline, LED ceiling light, Handrail Rear side with Stainless Steel Hairline finish, ventilation Cross Flow Fan, COP & Display Type - Full Ht COP and Mirror,Overload With Indicator,ARD,Intercom Required complete with required wiring , power points, lighting at shaft and distribution box, MCB/RCCB, 2 NOS GI Earthing with GI strip/wire and minimum 6 sqmm copper cable for 3 phase supply to lift DB from electric source. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender