Housing Urban and Rular Development Government Departments Closing in 7 days TDR #56747589

Tender For Upgradation Of Birla To Tirmali Road Km. 2/00 To 4/00 (Sh:- Construction of Earth Work,Protection Work,Cross Drainage Work,V-Shape Drain,Metalling & Tarring,Road Safety Works In Km. 2/000 To 4/000)

Issued by Government Departments · Sirmaur, Himachal Pradesh
Tender Value
2.03 Crore
Estimated cost
Bid Submission
07 Aug 2026
7 days left
EMD
4.08 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sirmaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Upgradation Of Birla To Tirmali Road Km. 2/00 To 4/00 (Sh:- Construction of Earth Work,Protection Work,Cross Drainage Work,V-Shape Drain,Metalling & Tarring,Road Safety Works In Km. 2/000 To 4/000)

BOQ

Name of Work:- Upgradation of Birla to Tirmali Road Km. 2/00 to 4/00 (SH:- C/O Earth Work,Protection work,Cross Drainage work,V-Shape Drain,Metalling & Tarring,Road Safety Works in Km. 2/000 to 4/000)
Sl. No. Item Description
1Excavation in soil in hilly area in all heights and depths in all kinds of soil including saturated soil comprising of mixed soil , ordinary rock and hard rock .All work of rock cutting by blastingshall be carried out by taking all necesary precautions against soil erosion ,damages to hill side ,water pollution etc. and to protect stability of hill side .Rock shall be excavated with chiseling and wedging out of rock (where blasting is prohibited) .All earth work in cutting /excavation including rock excavation shall be carried out true to lines ,grades ,sides slopes,width,camber,super-elevation and level as shown on the drawing and as directed by the Engineer-in-Charge in conformity with the requirement of MoRD technical specification for Rural Road, Section. 300 & 1600 to achive designed formation width including hauling and stacking of materials useful for constrcution at suitable sites safe manner and disposal of all surplus material to the approved dumping sites through all modes of transportation including head load and animal transport and mechanical means along with its levelling, fine dressing and carriage of machineries, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour if required. The land for dumping sites shall be arranged by the contractors himself and nothing extra shall be paid on this account,filling of unevenness blind age and finishing of the road to specified dimensions or as directed by the Engineer-in-charge for smooth riding. The recovery for stones ,whether usefule or not for 1046.17 cum. (One Thousand forty six point one seven Cubic Metre) in all cases, @ Rupees 300/= only (Rupees three hundred) per cubic metre shall be effected on prorata basis in all circumstances .Any loss to the public and private property during the course of excavation shall be the absolute responsibility of the contractor ,which shall have to be duly compensated by him in all cases.
2Providing and laying concrete Mechanically mixed and vibrated PCC 1:4:8 (One Cement : four sand : eight graded crushed stone aggregate 40 mm (forty milimetre) nominal size for plain /reinforced concrete in open foundations and plinths or similar works complete as per drawing and MoRD technical specification rural roads section 800, 900, 1200 and 1600 including carriage of materials upto all leads lifts and as per the direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
3Providing and laying of boulder apron laid in wire crates with 4 mm (four millimetre) dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10 % (ten percent) extra for laps and joints laid with stone boulders weighing not less than 40 kg (forty kilogram) each as per drawing and MORD technical specifications section 1300 including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
4Back filling behind abutment, wing wall and return wall and retaining wall with granular material complete as per drawings and MORD technical specification Section 1200 &1600 including carriage of materials with in all leads and lifts and as per the direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
5Providing weepholes in brick masonry /stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100mm (one hundred milimetre) dia (inner dia) PVC pipe extending through the full width of the structures with slop of 1(v);20 (H) towards drawing face complete as per drawings and MoRD technical specifications section 1200 and as per entire satisfaction,directin by Engineer-In-Charge and including carriage of materails with in all leads and lifts.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
6Providing and laying concrete Mechanically mixed and vibrated 1:6:12 (one cement: six sand : twelve graded stone aggregates 40 mm (forty millimetre) nominal size) for plain/reinforced concrete in open foundations complete as per drawing and technical specification section 800 and 1200 curing complete including the cost of form work and hauling of materials in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
7Providing and laying concrete mechanically mixed and vibrated PCC M-10 (Ten) in 1:3:6 (one cement: three sand : six graded stone aggregates 40 mm (forty millimetre) nominal size) design mix with cement contents not less than 220kg (two hundred Twenty kilogram per cubic metre) with 40mm (Forty millimeter) nominal size for plain/reinforced concrete in open foundation and plinths or similar works complete as per drawings and MoRD technical specification section 800, 900, 1200 and 1600 and curing complete including the cost of form work and hauling of materail in all leads and lifts as per the entire satisfication and direction of Engineer in charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
8Providing and laying mechanically mixed and vibrated plain cement concrete in foundation grade M-15 (M-fifteen) design mix with cement contents not less than 275 kg (two hundred seventy five kilogram per cubic metre) with 40 mm (forty millimetre) nominal size graded stone aggregate on ground or under water including curing complete including pumping or bailing out water de-watering removal of slush as required at site, which may arises at the time of laying concrete complete for all heights/depths including cost of form work in parapets and toe wall etcetra as per drawing and MORD technical specification section 800, 900 and 1200 including carriage of materials within all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government .
9Providing and Laying reinforced cement concrete pipe IS (Indian Standard ) class NP2 (Non Pressure-two) of 1000 (one thousand) milimetre internal dia metre for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (one cement is to two sand ) but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets as per drawings and MoRD technical specifications section 1100 including carriage of materials with in all leads and lifts as per the entire satisfaction and direction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
10Construction of Granular Sub-Base(Grade-1) by providing well graded materials, as per table 401 spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three Wheel 80-100 (Eighty-hundred) kN static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I Material, as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
11Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site,laying in uniform layers in subbase/ base course on a well prepared subbase and compacting with smooth wheel roller of 80 to 100 kN (Eighty to hundred Killo Newton) weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. including carriage of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
12Prime Coat : Providing and applying primer coat with bitumen emulsion (Durapave Emulsion SS-1(H)) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm (Zero point seventy to one killogram per square metre) using mechanical means as per Technical Specification Clause 502. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
13Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm (zero point twenty to zero point twenty five killogram per square metre) on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
14Providing and laying surface dressing as wearing course consisting of a layer of bituminous binder laid on the prepared surface, followed by a cover of crushed stone aggregates of specified size and rolling with three wheel 80-100 kN (eighty to hundred kilo Newton) static roller including cleaning the road surface as per Technical Specification Clause 507. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government , including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.
15Providing and laying bituminous concrete 30 mm thick ( thirty milimetre ) with 100-120 (one hunderd -one hundred twenty ) TPH batch type hot mix plant producing an average output of 75 ( seventy five ) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 ( five point four to five point six ) per cent of mix and filler, and filler with Zycotherm 0.1% (zero point one percent) by weight of Bitumen transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respect. , including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
16Providing and laying concrete mechanically mixed and vibrated PCC M-20 (Twenty) in 1:2:4 (one cement: two sand : four graded stone aggregates 40 mm (forty millimetre) nominal size) with 40mm (Forty millimeter) nominal size for plain/reinforced concrete in open foundation and plinths or similar works complete as per drawings and MoRD technical specification section 800 and 1200 and curing complete including the cost of form work and hauling of materail in all leads and lifts as per the entire satisfication and direction of Engineer in charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
17Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm (Eighty milimeter) as per drawings and Technical Specification Clause 1504. complete in all respect.including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate including octroi, royality, Malkana, toll tax, or other taxes imposed by the Government .
18Providing and erecting W metal beam crash barrier comprising 3 mm (three millimetre) thick corrugated sheet metal beam rail 70 cm (seventy centimetre) above road/ground level fixed on ISMC series Channel vertical part of 150 mmx75 mmx 5 mm (one fifty millimetre into seventy five millimetre into seventy five millimetre) special 2.00 metre (two metre) center to center 1.80 metre (one point eighty metre) high 1.10 metre (one point ten millimetre) below ground road level all steel parts and filaments to be galvanized by hot dip process, a fitting to confirm to IS 1367 and IS-1364 metal beam rail to be fixed on the vertical post with a space of channel section 150 mmx75 mmx5 mm (one fifty millimetre x seventy five millimetre x five millimetre), 330 mm (three hundred thirty millimetre) long complete as per MORTH Specification section 800 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
19Providing and fixing \\"Citizen Information Boards\\" as per specifications and drawings Two MS Plates of 1.60mm (one point sixty milimeter) thick duly welded with MS angle iron frame 25mmx25mmx5mm (twenty five millimetre x twenty five millimetre x five millimetre) on edges supported with 2 (two) Nos horizontal posts made of 75mmx75mm (seventy five millimetre x seventy five millimetre) of 125 (one hundred twenty five) SWG Steel tube duly embanded in and including cement concrete M-15 (fifteen) grade blocks of 600mm x600x750mm (six hundred millimetre x six hundred millimetre x seven hundred fifty millimetre) below ground level. All MS will be stove enameled both side lettering and printing arrows border etc will be painted with ready synthetic enamel paint of superior quality in required shade and colur. all sections of posts and steel tube will be primer and two coats of epoxy point as per drawing. and technical specification section 1700 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. the rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
20Providing and erecting direction and place identifications of semi reflective sign boards with area not exceeding up to 0.90 sqm (zero point nine square metre) as per IRC:67 made of 2 mm (two millimetre) thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm (seventy millimetre)width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm (forty seven millimetre x forty seven millimetre) of 12 SWG Square tube of 3050 mm (three thousand fifty millimetre) height duly strengthened by 25 mm x 5 mm (twenty five millimetre x five millimetre) M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 (fifteen) grade cement concrete 450 mm x 450 mm x 600 mm (four fifty millimetre x four fifty millimetre x six hundred millimetre), 600 mm (six hundred millimetre) below ground level as per approved drawing and MoRD Technical Specification Section 1700 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
21Providing and erecting direction and place identifications of semi reflective sign boards with area up to 0.90 sqm (zero point nine square metre) as per IRC:67 made of 2 mm (two millimetre) thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm (seventy millimetre)width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm (forty seven millimetre x forty seven millimetre) of 12 SWG Square tube of 3050 mm (three thousand fifty millimetre) height duly strengthened by 25 mm x 5 mm (twenty five millimetre x five millimetre) M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 (fifteen) grade cement concrete 450 mm x 450 mm x 600 mm (four fifty millimetre x four fifty millimetre x six hundred millimetre), 600 mm (six hundred millimetre) below ground level as per approved drawing and MoRD Technical Specification Section 1700 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
22Providing and laying of Hot applied thermoplastic compound 2.5 mm (trwo point five milimeter) thick including reflectorising glass beads at the rate of 250 gms (Two hundred fifty grams) per sqm area, thickness of 2.5 mm (two point five milimeter) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government .
23Reinforced cement concrete Mechanically mixed and vibrated M-15 (fifteen) grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and MORD technical specifications rural roads section 1700. (Ordinary kilometer stone precast). as per drawings. including carriage of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government.
24Reinforced cement concrete Mechanically mixed and vibrated M-15 (fifteen) grade kilometer stone local stone of standard design as per IRC :8 fixing in position including painting and printing etc. as per drawing and MORD technical specifications rural roads section 1700. 200 (Two Hundred meter) stone pre cast including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government . Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56747589
AUTHORITY Government Departments
TENDER VALUE 2.03 Crore
LAST DATE 07-08-2026
Authority
Authority Name Public Works Department
Work Description Tender for Upgradation Of Birla To Tirmali Road Km. 2/00 To 4/00 (Sh:- Construction of Earth Work,Protection Work,Cross Drainage Work,V-Shape Drain,Metalling & Tarring,Road Safety Works In Km. 2/000 To 4/000)
Basic Detail
Tender No SANGRAH 332-47 DATED 29.07.2026
Bidding Type Tender
Location
City Sirmaur
State Himachal Pradesh
Key Dates
Publish Date 30 Jul 2026
Submission Date 07 Aug 2026
Open Date 07 Aug 2026
Finance
Tender Value 2.03 Crore
Tender Fee 7000
EMD 4.08 Lakhs
Exemption Not Available
Document List
9fcfc17f-126f-4baa-80f3-baf72f6044c5.html
BOQ_207846.xls
SBD.pdf
Tendernotice_1 (10).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 30, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 07, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Aug 07, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

9fcfc17f-126f-4baa-80f3-baf72f6044c5.html

xls

BOQ_207846.xls

pdf

SBD.pdf

pdf

Tendernotice_1 (10).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders