Tender For Estimate For Laying Up Gradation Pipeline For Outlet At Rd 22810/L Of Phul Disty
Tender Value
1.07 Crore
Estimated cost
Bid Submission
14 Aug 2026
2 days left
EMD
2.14 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Laying Up Gradation Pipeline For Outlet At Rd 22810/L Of Phul Disty
BOQ
| Sl. No. | Item Description |
| 1 | Lowering, jointing of RCC NP-2 plain end pipes 700 mm dia laying same to correct gradient and alignment and jointing end sand fixing collars with cement mortar 1:2 as per IS 458:2003 in all depths complete in all respect. |
| 2 | Lowering, jointing and cutting of RCC pipes 150 mm dia for vent pipe into Trenches and laying same to correct alignment as per IS 458:2003 (@2.5m/No) |
| 3 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. |
| 4 | Dismantling brick work, tile masonry or tile lining .in cement |
| 5 | Earthwork excavation in foundation, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and side of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres. |
| 6 | PCC 1:4:8 with Stone Ballast 40 mm gauge using concrete mixer volume metric type |
| 7 | C. Conc. 1:2:4 with stone ballast using concrete mixer volume metric type |
| 8 | First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth. |
| 9 | 10mm thick cement plaster 1:4 |
| 10 | 10mm thick cement plaster 1:4 floors |
| 11 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 12 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in super structure. |
| 13 | Foot rest For manhole Providing orange colour safety footrest of minimum 6mm thick plasticencapsulated as per IS 10910 on 12mm dia steel bar confirming to IS 1786 having minimum cross section as 23mm x 25mm and over all minimum length 263mm and width as 165 mm with minimum 112 mm space b/w protruted legs having 2mm tread on top surface by ribbing or chequrring besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture permanant identifaction mark to be visble even after fixing i/c fixing un manholes with 30x150x75 cm cement concrete block 1:2;4 complete as per design |
| 14 | Providing and fixing Riser/Alfa valve (nakka) complete in all respect as per entire satisfaction of engineer-in charge and fixing riser/alfa valve fixer (700mm) |
| 15 | Wrought iron or MS ladders, framed grills, gratings etc. ends of bars riveted or molded forged framed window guards, barred iron doors, stair case iron railing etc. i/c cost of bolts and nuts, screws, welding rod complete fixing in position |
| 16 | providing and fixing of steel shutter gate assembly for 700 mm i/d pipes for pipelines complete in all respects. |
| 17 | Cold twisted deformed(Ribbed/TOR Steel) Bars (Fe 500 grade as per IS 1786:2008), For RCC works i/c bending binding and placing in position complete in all respects Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender