Tender For Construction Of One Room At Councilor Ward Office In Ward No.31 Pateog (Sh:- Construction of One Room)
Tender Value
7.66 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
7 days left
EMD
15300
Bank guarantee accepted
Document Fee
413
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of One Room At Councilor Ward Office In Ward No.31 Pateog (Sh:- Construction of One Room)
BOQ
| Sl. No. | Item Description |
| 1 | Centering and shuttering including strutting, propping etc. and removal of form work for : Columns, Pillars, Piers, Abutments, Posts and Struts including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 2 | Suspended floors, roofs landings balconies and access platfrom including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 3 | Edges of slabs and breaks in floors and walls Under 20 cm wide including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 4 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:1½:3 (1 cement : 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size). |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size). |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 8 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class D/wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 9 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 40 mm thick 2nd Class D/Wood including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 11 | Providing and fixing aluminium Handle, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 125 mm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 12 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm Approved quality including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 14 | 6 mm cement plaster to celling in cement mortar 1:3 (1 Cement :3 sand) including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 15 | 15 mm cement plaster in single coat on Rough side of brick/Concrete /stone walls for interior plastering up to all floor level including arises internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth in cement motar 1:6 (1 cement : 6 Sand) |
| 16 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 17 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 18 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: water thinable cement primer including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 19 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 20 | Finishing walls with weather proof water based acrylic Emulsion of apex asian paint/Nerolac paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 Sqm including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 21 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixingnecessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.steel 80x1.25 mm M.S. laths with 1.25 mm thick work in single section, fixed with or top cover including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. |
| 22 | Providing and fixing ball bearing for rolling shutters including carriage of materials within all leads lifts and other incidentals as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender