Tender For New Construction Of Day Care Sub Center Cum Health Wellnes Center Building At Sikharapur Of Khandapada Block In The District Of Nayagarh For The Year 2023 24
Tender Value
51.25 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
11 days left
EMD
51255
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nayagarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for New Construction Of Day Care Sub Center Cum Health Wellnes Center Building At Sikharapur Of Khandapada Block In The District Of Nayagarh For The Year 2023 24
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in hard soil in the structures upto 3m depth as per drawing and technical specification clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials, dressing of sides and bottom and backfilling with approved materials including cost, conveyance, royalty of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge. (Ground Floor) |
| 2 | Providing and filling in foundation and plinth with sand including watering & ramming with cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and cost of labour, T&P, etc. required for the work complete as per specification & direction of the Engineer-in-charge. (Ground Floor) |
| 3 | Providing and laying of cement concrete of prop. (1:3:6) using 4cm size black hard granite crusher broken stone aggregate including watering, curing and ramming with cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge. (Ground Floor) |
| 4 | Masonry work using Flyash Bricks of size 250mm X 125mm X 80mm having crushing strength not less than 75 kgs/ cm2 in cement mortar (1:6) in Foundation & Plinth with portland slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per specification & direction of the Engineer-in-charge. (Ground Floor) |
| 5 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. i) Column Base |
| 6 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. ii) Plinth Beam |
| 7 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. iii) Column (Ground Floor) |
| 8 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. iii) Column 1st Floor |
| 9 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. iv) Lintel (Ground Floor) |
| 10 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. iv) Lintel 1st Floor |
| 11 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. v) Chajja (Ground Floor) |
| 12 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. v) Chajja 1st Floor |
| 13 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. vi) Beam (Ground Floor) |
| 14 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. vi) Beam 1st Floor |
| 15 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. vii) Stair Case (Ground Floor) |
| 16 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. vii) Stair Case 1st Floor |
| 17 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. viii) Roof slab (Ground Floor) |
| 18 | R.C.C. work of M-20 grade using 20mm and down graded size black hard granite crusher broken stone chips including hoisting, lowering, laying, compacting concrete, watering & curing for 28 days with centering & shuttering & finishing the exposed surface smooth providing grooves for beads wherever necessary including cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount & cost of all labour, T&P etc. required for the work complete in all respect but excluding cost of M.S.rods or Tor Steel & binding wieres & labour charges for bendng & binding & tying the grills as per specification & direction of the Engineer-in-charge. viii) Roof slab 1st Floor |
| 19 | Cutting, straightening coiled or bent up M.S. rods, HYSD steel or Tor Steel of grade Fe-500-D confirming to I.S.-1786 - 1985 welding or jointing if necessary, bending, binding, tying the grills as required for RCC works, and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading of M.S. rods, HYSD steel or Tor steel and binding wires of 18 to 20 gauge required for the work including cost of all materials, labour charges, sundries, T&P etc. and scaffolding complete in all respect as per specification and direction of the Engineer-in-Charge (payment will be made according to the actual weight of M.S. rod or HYSD steel or Tor steel & binding work consumed in the work) (Ground Floor) |
| 20 | Cutting, straightening coiled or bent up M.S. rods, HYSD steel or Tor Steel of grade Fe-500-D confirming to I.S.-1786 - 1985 welding or jointing if necessary, bending, binding, tying the grills as required for RCC works, and hoisting, lowering and placing in proper position according to approved designs and drawings including cost, conveyance, loading, unloading of M.S. rods, HYSD steel or Tor steel and binding wires of 18 to 20 gauge required for the work including cost of all materials, labour charges, sundries, T&P etc. and scaffolding complete in all respect as per specification and direction of the Engineer-in-Charge (payment will be made according to the actual weight of M.S. rod or HYSD steel or Tor steel & binding work consumed in the work) 1st Floor |
| 21 | Masonry work using Flyash Bricks of size 250mm X 125mm X 80mm having crushing strength not less than 75 kgs/ cm2 in cement mortar (1:6) in Super Strcutre with portland slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per specification & direction of the Engineer-in-charge. (Ground Floor) |
| 22 | Masonry work using Flyash Bricks of size 250mm X 125mm X 80mm having crushing strength not less than 75 kgs/ cm2 in cement mortar (1:6) in Super Strcutre with portland slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries, T&P etc complete as per specification & direction of the Engineer-in-charge. 1st Floor |
| 23 | 16 mm. thick cement plaster in c.m.(1:6) to inside surface in all floors at all height with approved grade of cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials with additional charges as decieded by the District Administration,DMF & EMF @15% on royality amount, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete with providing grooves as per specification and direction of the Engineer in charge. (Ground Floor) |
| 24 | 16 mm. thick cement plaster in c.m.(1:6) to inside surface in all floors at all height with approved grade of cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials with additional charges as decieded by the District Administration,DMF & EMF @15% on royality amount, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete with providing grooves as per specification and direction of the Engineer in charge. 1st Floor |
| 25 | 12 mm. thick cement plaster in c.m.(1:6) to outside surface in all floors at all height with approved grade of cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials with additional charges as decieded by the District Administration,DMF & EMF @15% on royality amount, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete with providing grooves as per specification and direction of the Engineer in charge. Ground Floor |
| 26 | 12 mm. thick cement plaster in c.m.(1:6) to outside surface in all floors at all height with approved grade of cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials with additional charges as decieded by the District Administration,DMF & EMF @15% on royality amount, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete with providing grooves as per specification and direction of the Engineer in charge. 1st Floor |
| 27 | Providing 06mm thick cement mortar(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment including watering, curring with cost,conveyance, roylity of all materials with additional charges as decieded by the District Administration,DMF & EMF @15% on royality amount, labour charges, T&P etc. required for the work complete in all respect as per specification and direction of Engineer-in-charge. (Ground Floor) |
| 28 | Providing 06mm thick cement mortar(1:4) to RCC surface finished smooth including closed deep chiping and slury treatment including watering, curring with cost,conveyance, roylity of all materials with additional charges as decieded by the District Administration,DMF & EMF @15% on royality amount, labour charges, T&P etc. required for the work complete in all respect as per specification and direction of Engineer-in-charge. 1st Floor |
| 29 | Priming one coat using water bound cement primer in all floors and heights to wall surface to receive weather coat painting/ Distempering of approved make and shade including cost of scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the specification and direction of the Engineer-in-charge. (Ground Floor) |
| 30 | Priming one coat using water bound cement primer in all floors and heights to wall surface to receive weather coat painting/ Distempering of approved make and shade including cost of scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as per the specification and direction of the Engineer-in-charge. 1st Floor |
| 31 | Finishing walls with two coats of weather coat paint over priming surface (outside) of approved shade to outside surface with cost, conveyance, of all materials, labour charges, T&P etc.required for the work complete as per specification and direction of the Engineer-in-charge. (Ground Floor) |
| 32 | Finishing walls with two coats of weather coat paint over priming surface (outside) of approved shade to outside surface with cost, conveyance, of all materials, labour charges, T&P etc.required for the work complete as per specification and direction of the Engineer-in-charge. 1st Floor |
| 33 | Wall painting two coats with Plastic Emulsion paint over priming surface (inside) including sand papering, polishing the surface with cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. (Ground Floor) |
| 34 | Wall painting two coats with Plastic Emulsion paint over priming surface (inside) including sand papering, polishing the surface with cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. 1st Floor |
| 35 | Providing and laying in floors Non-skid matt finish vertrified step tiles of 12-15mm thick full body bull nose edges of approved made & colour like somany Kajaria or Johanson laid on 20mm thick cement mortar (1:1) including grouting the joints with white cement and matching pigment and washing with oxalic acid etc.complete including cost, conveyance of precast vertified tiles & other materials with all labour T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. (Ground Floor) |
| 36 | Providing and laying in floors Non-skid matt finish vertrified step tiles of 12-15mm thick full body bull nose edges of approved made & colour like somany Kajaria or Johanson laid on 20mm thick cement mortar (1:1) including grouting the joints with white cement and matching pigment and washing with oxalic acid etc.complete including cost, conveyance of precast vertified tiles & other materials with all labour T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. 1st Floor |
| 37 | Supplying, fitting and fixing of vertified tiles in floors of size 600mm x 600mm coloured/printed series (Homogenous) of approved make with application of polymer modified cement based water resistant adhesive bed of requied thickness of 10mm and filling joints with epoxy grout of approved quality including cost, conveyance of precast vertified tiles & other materials with all labour T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. (Ground Floor) |
| 38 | Supplying, fitting and fixing of vertified tiles in floors of size 600mm x 600mm coloured/printed series (Homogenous) of approved make with application of polymer modified cement based water resistant adhesive bed of requied thickness of 10mm and filling joints with epoxy grout of approved quality including cost, conveyance of precast vertified tiles & other materials with all labour T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge 1st Floor |
| 39 | Providing and fixing of Ceremic wall tiles in Dadoes skirting and risers of steps on 6mm thick of size 300X200mm of cement mortar (1:3) jointed with neat cement slury, mixed with pigment to match the shades of the tiles including rubbing and polishing with cost, conveyance of precast tiles, labour charges, T&P etc.required for the work complete in all respect as per specification and direction of the Engineer-in-charge. (Ground Floor) |
| 40 | Providing and fixing of Ceremic wall tiles in Dadoes skirting and risers of steps on 6mm thick of size 300X200mm of cement mortar (1:3) jointed with neat cement slury, mixed with pigment to match the shades of the tiles including rubbing and polishing with cost, conveyance of precast tiles, labour charges, T&P etc.required for the work complete in all respect as per specification and direction of the Engineer-in-charge. 1st Floor |
| 41 | Providing, fitting and fixing of Vertified Tiles in dados skirting and risers of step on 12mm thick with cement mortar (1:3) jointed with neat cement slury, mixed with pigment to match the shades of the tiles including rubbing and polishing with cost, conveyance of precast tiles, labour charges, T&P etc.required for the work complete in all respect as per specification and direction of the Engineer-in-charge. (Ground Floor) |
| 42 | Providing, fitting and fixing of Vertified Tiles in dados skirting and risers of step on 12mm thick with cement mortar (1:3) jointed with neat cement slury, mixed with pigment to match the shades of the tiles including rubbing and polishing with cost, conveyance of precast tiles, labour charges, T&P etc.required for the work complete in all respect as per specification and direction of the Engineer-in-charge. 1st Floor |
| 43 | Providing, fitting and fixing of Chequered Tiles of size 300mmX300mm of approved colour laid in floors on 20mm thick with cement mortar (1:1) jointed with neat cement slury, mixed with pigment to match the shades of the tiles including rubbing and polishing with cost, conveyance of precast tiles, labour charges, T&P etc.required for the work complete in all respect as per specification and direction of the Engineer-in-charge. (Ground Floor) |
| 44 | Providing and laying of cement concrete of prop. (1:2:4) using 12mm size black hard granite crusher broken chips including watering, curing and ramming, centering and shuttering with cost, conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-Charge. Ground Floor |
| 45 | Supplying, fitting & fixing of M.S.grills / M.S.shutters/ M.S angle choukath / M.S.Plate shutter / M.S.Grill gate in proper position including making holes in walls or RCC structures and window grills with cost, conveyance of all materials, labour charges,T&P etc. required for the work complete as per the specification and direction of Engineer-in-charge. (Ground Floor) |
| 46 | Supplying, fitting & fixing of M.S.grills / M.S.shutters/ M.S angle choukath / M.S.Plate shutter / M.S.Grill gate in proper position including making holes in walls or RCC structures and window grills with cost, conveyance of all materials, labour charges,T&P etc. required for the work complete as per the specification and direction of Engineer-in-charge. 1st Floor |
| 47 | Providing, fixing & fitting of two track UPVC sliding window track UPVC sliding window of approved made with 6mm thick glass of approved quality complete with 6mm thick glass of approved qauality including cost, conveyance of all materials, labour charges, T&P etc.required for the work complete in all respect as per specification and direction of the Engineer-in-charge. (Ground Floor) |
| 48 | Providing, fixing & fitting of two track UPVC sliding window track UPVC sliding window of approved made with 6mm thick glass of approved quality complete with 6mm thick glass of approved qauality including cost, conveyance of all materials, labour charges, T&P etc.required for the work complete in all respect as per specification and direction of the Engineer-in-charge. 1st Floor |
| 49 | Priming one coat with any approved primer to receive Enamel painting over iron/wooden doors and windows,grills, Grill Gate etc. with sand papering, polishing the surface with cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. (Ground Floor) |
| 50 | Priming one coat with any approved primer to receive Enamel painting over iron/wooden doors and windows,grills, Grill Gate etc. with sand papering, polishing the surface with cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. 1st Floor |
| 51 | Painting two coats with Synthetic Enamel paint over iron/wooden doors and windows,grills, Grill Gate etc. with sand papering, polishing the surface with cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. (Ground Floor) |
| 52 | Painting two coats with Synthetic Enamel paint over iron/wooden doors and windows,grills, Grill Gate etc. with sand papering, polishing the surface with cost, conveyance of all materials, labour charges, T&P etc. required for the work complete as per specification and direction of the Engineer-in-charge. 1st Floor |
| 53 | Providing 20mm thick grading plaster in cement mortar(1:4) over roof slab including watering, curring & ramming with cost,conveyance, royalities of all materials with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount, cost of labour, T&P, etc. required for the work complete as per specification & direction of the Engineer-in-charge.Ground Floor |
| 54 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, of all materials, labour charges, T & P etc. required for the work complete in all respect as per specification and direction of the Engineer-in-charge. (Ground Floor) |
| 55 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance, of all materials, labour charges, T & P etc. required for the work complete in all respect as per specification and direction of the Engineer-in-charge. 1st Floor |
| 56 | E.I. works Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group A |
| 57 | E.I. works Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do-Group B |
| 58 | E.I. works Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group C |
| 59 | E.I. works Recessed wiring to Fan Point in. -do- Group B |
| 60 | E.I. works Recessed wiring to Call Bell Point in -do- Group C |
| 61 | E.I. works Recessed wiring to Exhaust Fan Point in -do- Group C |
| 62 | E.I. works S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 63 | E.I. works S/F of Angle holder replacing Ceilling Rose |
| 64 | E.I. works S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board |
| 65 | E.I. works S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 66 | E.I. works S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 67 | E.I. works S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC |
| 68 | E.I. works S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. |
| 69 | E.I. works S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 70 | E.I. works S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.2 Modular box with base & cover |
| 71 | E.I. works S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 4 Modular box with base & cover |
| 72 | E.I. works S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 6 Modular box with base & cover |
| 73 | E.I. works S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 8 Modular box with base & cover |
| 74 | E.I. works S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 12 Modular box with base & cover |
| 75 | E.I. works Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.0 (1.8) |
| 76 | E.I. works Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x2.5+1x1.5 (1.8.2) |
| 77 | E.I. works Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x4+1x1.5 (1.8.3) |
| 78 | E.I. works Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 79 | E.I. works S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 80 | E.I. works Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of MCB 12 way Double door (2.3.7) |
| 81 | E.I. works Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 82 | E.I. works Supply & laying 8 SWG Cu wire in recess for loop earthing as required (3.18) |
| 83 | E.I. works S/F of Cu .Earth Plate Earthing 600 mm x600mmx3.15mm with Salt & Charcoal for Earth electrode (3:5)+(3.6) |
| 84 | E.I. works Supply, Installation, Testing & Commissioning of exhaust fan upto 450 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43) |
| 85 | E.I. works S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 86 | E.I. works S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL |
| 87 | E.I. works Supply of 1200mm BLDC A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Energia-32/Polycab-Affeciente Neo/Crompton-Energion /Havels-Efficiencia DX/Orient-Ecotech Supreme/Anchor-Eco Breeze urban ) |
| 88 | E.I. works S/F step type modular fan regulator |
| 89 | E.I. works Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 ) |
| 90 | E.I. works Supply & Fixing of 45-48 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 91 | PH Works Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. Initial lift upto 1.5 mtr |
| 92 | PH Works Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. From 1.5 mtr to 3.0 mtr depth |
| 93 | PH Works Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. |
| 94 | PH Works Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 95 | PH Works Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 96 | PH Works Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 97 | PH Works Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 98 | PH Works Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 99 | PH Works Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 100 | PH Works Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 101 | PH Works Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 102 | PH Works Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 103 | PH Works Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 104 | PH Works Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 105 | PH Works Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 106 | PH Works Supplying all materials, labour, T&P and fixing Ceramic tiles in floors, treads abd kabdubg ib 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. GROUND FLOOR |
| 107 | PH Works Supplying all materials, labour, T&P and fixing Ceramic tiles in floors, treads abd kabdubg ib 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. 1ST FLOOR |
| 108 | PH Works Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dado skirting on 12mm thick CP 1:3 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. GROUND FLOOR |
| 109 | PH Works Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dado skirting on 12mm thick CP 1:3 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. 1ST FLOOR |
| 110 | PH Works Providing fitting, fixing AL door with anodized AI door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no.4660 and frame to be completed by means of jointing angle no.1855 including cost of labour T&P hire charges of drilling machine labour charges etc.complete with cost of laminated board and as per direction of the Engineer-in-charge. (5X0.75X2.05) |
| 111 | PH Works Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in cm (1:4) for taking GI / PVC pipes and making good the damages etc all complete as per P.H specification and direction of the E.I.C. a) 250mm to 375mm thick wall |
| 112 | PH Works Cutting Grooves in wall or floor |
| 113 | PH Works Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C (PARRYWARE, CERA, HINDWARE) |
| 114 | PH Works Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. 580mmx440mm size White Orissa pan |
| 115 | PH Works European water closet with P trap plain with White Plastic PVC Seat Cover |
| 116 | PH Works Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C. 610x510x200 mm stainless steel kitchen sink |
| 117 | PH Works Supplying all materials, labour T&P and fixing wash basins with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C. a).550mmx400mm W.H.basin (PARRYWARE, CERA, HINDWARE) |
| 118 | PH Works Fixing of Pedestrial for W.H.B |
| 119 | PH Works Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C. (PLAZZ / Parryware / HINDWARE)A) 15mm dia CP Bib Cock (long Body) |
| 120 | PH Works 15mm dia CP Bib Cock (Sort Body) |
| 121 | PH Works 15mm dia CP Two way angle/Bib Cock |
| 122 | PH Works 15mm dia CP Health Fuccet |
| 123 | PH Works 15mm dia CP Angle Stop Cock |
| 124 | PH Works 15 mm dia CP Pillar Cock |
| 125 | PH Works 15mm dia CP concealed stop cock |
| 126 | PH Works a) Fixing of 20mmx450mm long CP towel rail |
| 127 | PH Works CP towel ring |
| 128 | PH Works fixing CP soap holder |
| 129 | PH Works Fixing of Glass Mirror 600mmx450mm size B.E mirror (fixed type) |
| 130 | PH Works 25mm dia U-PVC Ball Valve[Metal Ball] |
| 131 | PH Works 32mm dia U-PVC Ball Valve[Metal Ball] |
| 132 | PH Works 15mm dia CP flange |
| 133 | PH Works 15 mm C.P Extension piece 50 mm long |
| 134 | PH Works 15mm x 225mm long size CP shower arm |
| 135 | PH Works Supplying all materials, labour, T&P and fitting and fixing U-PVC soil waste ventilating pipes of and fittings of the following outside diameter of 4kg/cm2 conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. a) 110mm dia PVC SWR pipe |
| 136 | PH Works 110mm dia Plain bend |
| 137 | PH Works 110mm U-PVC door bend |
| 138 | PH Works 110mm U-PVC door Tee |
| 139 | PH Works 110mm dia cowl |
| 140 | PH Works 125mm dia CP grating |
| 141 | PH Works 110mm dia PVC P trap |
| 142 | PH Works 75mm dia PVC pipe |
| 143 | PH Works 75mm PVC SWR plain bend |
| 144 | PH Works 75mm PVC SWR DOOR bend |
| 145 | PH Works Supplying all materials, labour, T&P and providing and fixing to wall or ceilling and floor PVC pipes conforming to (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing etc all complete as per P.H specification and direction of the E.I.C. a) 20mm dia C-PVC pipe (Internal) |
| 146 | PH Works 25mm dia PVC(ASTM) pipe(External) |
| 147 | PH Works 32mm dia PVC(ASTM) pipe(External) |
| 148 | PH Works Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. Laying of 100 mm dia S.W Pipe line Haunch top |
| 149 | PH Works Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:1.5:3) mix using 12 mm size H.G chips, foundation concrete (1:3:6) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. (a).Inside size 250mmx250mm |
| 150 | PH Works Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C Inside size 760mm x 760mm x 460mm |
| 151 | PH Works Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. Construction of Soak way Pit (1.00 m dia x 2.00m Deep) |
| 152 | PH Works Construction of RCC Ring Soak way Pit (0.91 m dia x 2.10m Deep) |
| 153 | PH Works Supplying all materials, labour, T&P and Fitting and Fixing of PVC water storage tank including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 Ltr capacity PVC tank (ISI mark Sintex make) |
| 154 | PH Works Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. 1000 Ltr capacit ON ground FLOOR |
| 155 | PH Works SINKING OF TW Labour for drilling a perfectly vertical bore hole at specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination rigs as required to suit the site condition as per the direction of the Engineer-in-charge including use of own rigs with its accessories, tools and plants and consumables etc for lowering of 200 mm dia P.V.C/G.I/MS pipes for housing fitted socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tubewell) Drilling of 125mm X 100mmdia bore- |
| 156 | PH Works Lowering of the following size G.I/P.V.C pipes with or without slotted pipes as per the necessary from ground level upto 30 mtrs depth and fitted and fixed up in perfectly vertical position including cutting and threading pipes and slotted pipe and supplying and fixing all jointing materials, tools and plants complete and keeping the top of the casing pipe threaded including plugging tubewell to prevent entry of foreign materials from above. a) Lowering of 125mm dia PVC pipe (Labour) |
| 157 | PH Works Cost of 125mm dia PVC pipe (Sch-80-ISI mark) |
| 158 | PH Works Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge is obtained from the tubewell including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge. |
| 159 | PH Works Installation of pump setSupply of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 1800-2200 ltr/hour and a head of 45-60 Mtr of reputed make like KSB/TEXMO and equivlant including all cost conveyance and taxes etc all complete as per the direction of E.I.C. |
| 160 | PH Works Supplying all labour, T&P and fitting abnd fixing of 1.00 HP single phase vertical submersible pump set with commissioning and testing etc all complete as per the direction of E.I.C. |
| 161 | PH Works Supplying all labour, T&P and fitting abnd fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00 HP single phase submersible pump including all cost, conveyance of all taxes etc all complete as per the direction of E.I.C. |
| 162 | PH Works Supplying all labour, T&P and fitting abnd fixing of three core flat cable (1.5 mm2) of ISI mark of reputed make like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc all complete as per as per the direction of E.I.C. |
| 163 | PH Works Supplying all labour, T&P and fitting abnd fixing of plastic rope MS well cover, MS clamp, stainless steel short piece, bend and socket including all cost, taxes etc all complete as per as per the direction of E.I.C. |
| 164 | PH Works Supplying all labour, T&P and fitting abnd fixing of HDPE pipe and fitting with making connection to pump set including all cost, taxes etc all complete as per as per the direction of E.I.C. A) 32mm dia HDPE pipe |
| 165 | PH Works BORE PROTECTION Supplying all materials, labour, T&P for construction of bore protection wall with providing sand filling, cement concrete (1:4:8) with HG metal & KB brick work in cement mortar (1:6) of 1.15 height, 16mm thick CP over the brick work, RCC slab of size 0.95 x 0.95 x 0.75 mtr avairage length in C 1:1.5:3, centering shutering including watering curing conveyance of all materials to work site with all cost, taxes etc all complete as per as per the direction of E.I.C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender