Tender For Repair And Maintenance Of Internal Wiring,Submain Wiring,Db,Mcb And Fitting Fixtures/Accessories At Otm , Store, Ors/Jcos& Officer Md Accn At Basoli Mil Stn Under Ge Basoli
Tender Value
45 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
20 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Internal Wiring,Submain Wiring,Db,Mcb And Fitting Fixtures/Accessories At Otm , Store, Ors/Jcos& Officer Md Accn At Basoli Mil Stn Under Ge Basoli
BOQ
| Sl. No. | Item Description |
| 1 | Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for issued in Schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as per specified and directed. |
| 2 | M&L for point wiring for light point/fan/exhaust fan/bell point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) in draw through exising conduit having thickers 1.8mm with all fittings, pressed sunken box thickness of sheet not less than 1.6 mm thick suitable for modular switches and socket including 1.5 sqmm copper conductor (FRLS) as earth continuty conductor connected to comman earth dolly in and including cutting chiseling for concealed piping as required and making good disturbed surface area and white wash/ colour wash to matching with the existing colour complete all as secified and directed. NOTE :- (i) colour coding is to be mainted (Ph-red, N-black, half-yellow, Earth-green).(b) Rate for cutting chases for conduit and finishing metal boxes suitable. |
| 3 | All as per srl item No 2 above but for 3 pin 5 amps socket independent board complete all as specified and directed. |
| 4 | All as per srl item No 2 above but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed. |
| 5 | All as per srl item No 2 here in before but one bell/buzzers point controlled by one push button on the same board with other inner switches or independent with cable 1.5 sqmm size complete all as per specified and directed. |
| 6 | M&L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) draw through exising conduit conduit having thickers 1.8mm with all fittings, pressed sunken box thickness of sheet not less than 2mm thick suitable for modular switches and socket including 2.5 sqmm copper conductor (FRLS) as earth continuty conductor connected to comman earth dolly in and including cutting chiseling for concealed piping as required and making good disturbed surface area and white wash/ colour wash to matching with the existing colour complete all as secified and directed. NOTE :- (i) colour coding is to be mainted (Ph-red, N-black, Earth-green). |
| 7 | M&L for point wiring for light point/fan/exhaust fan/bell point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) in and including PVC casing caping having thickers 1.8mm with all fittings, pressed sunken box thickness of sheet not less than 1.6 mm thick suitable for modular switches and socket including 1.5 sqmm copper conductor (FRLS) as earth continuty conductor connected to comman earth dolly in and including cutting chiseling for concealed piping as required and making good disturbed surface area and white wash/ colour wash to matching with the existing colour complete all as secified and directed. NOTE :- (i) colour coding is to be mainted (Ph-red, N-black, half-yellow, Earth-green). |
| 8 | All as per srl item No 7 above but for 3 pin 5 amps socket independent board complete all as specified and directed. |
| 9 | All as per srl item No 7 above but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed. |
| 10 | M&L for point wiring for power point controlled by one switch with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) in and including PVC casing caping having thickers 1.8mm with all fittings, pressed sunken box thickness of sheet not less than 1.6 mm thick suitable for including 2.5 sqmm copper conductor (FRLS) as earth continuty conductor connected to comman earth dolly in and complete all as secified and directed. NOTE :- (i) colour coding is to be mainted (Ph-red, N-black, half-yellow, Earth-green). |
| 11 | M & L for point wiring for one light/one fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked for switches, including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained. (Ph-Red, N-Black, Half -Yellow, Earth- Green) |
| 12 | All as per item No 11 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed. |
| 13 | All as per srl item No 11 above but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed. |
| 14 | All as per srl item No 11 here in before but one bell/buzzers point controlled by one push button on the same board with other inner switches or independent with cable 1.5 sqmm size all as per specified and directed. |
| 15 | M & L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) with in and including PVC concealed conduit having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor (FRLS) as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface area and white wash /colour wash to matching with the existing colour and all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained. (Ph-Red, N-Black,Earth- Green) |
| 16 | S & F for switch piano flush type one way 5 amps SP complete all as specified and directed. |
| 17 | S & F socket outlet 3 pin 5 amps flush type complete all as specified and directed. |
| 18 | S & F for switch socket combination 2 in 1, 5 pin 5 amps multipurpose complete all as specified and directed. |
| 19 | S & F switch socket multipurpose 2 in 1, 6 pin 5 and 15 amps controlled by one switch flush type universal. |
| 20 | Supplying & Fixing Bell push, 6 amp ,two module complete all as specifed and directed. |
| 21 | Supply and fix in repair/replacement coard less bell of different music AC 230V complete all as specified and directed. |
| 22 | S & F for lamp holder/batton holder/angle holder insulated body (Metal ring) with back bakelite plate suitable for batten fittings complete all as specified and directed. |
| 23 | M & L for ceiling rose 65 x 50mm three terminals complete all as specified and directed. |
| 24 | Supply & fix in repair/replacement 3 pin plug top 16A, 240 V complete all as specified and directed. |
| 25 | Supply and fixing ceiling fan regulator electronic type 5 stage speed variation,socket type is size, ISI marked complete all as specified and directed. |
| 26 | S&F in replacement sheet metal powder enclosure powder coated versatile double door Triple pole and neutral (TPN) distribution board for MCB provisions 415Volt, 50Hz AC supply for 04 way fitted with copper bus bar rated 200amps, neutral link, earth bar complete all as specified and directed. |
| 27 | M&L for SPN MCB DB 2 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed. |
| 28 | M&L for SPN MCB DB 4 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed. |
| 29 | M&L for SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed. |
| 30 | M&L for SPN MCB DB 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar, neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar and finishes to match exisiting surface complete all as specified and directed. |
| 31 | Sheet metal enclosures distribution boards, double door ,VTPN, 415 volts 4 ways (one incoming three phase & twelve out goings single phase )for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following a) MCCB 04 POLE 100 amp =01 NO (for incoming ) (b) MCB SPs = 12 Nos (for outgoings) . ( Note :- (i)The DB shall be VTPN series of Make : Havells ,cat part no: DHDLVDRWGOFO04 or equivalent make of L&T/ ABB . (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble properly crimped.(iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost .MCB sp should be paid under respective items of schedule separately (vii)price of MCCB 100 amp 4 pole should be quoted in this item . |
| 32 | Supply and fix 4 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, replace to burnt MCCB at exisinting panel/DB complete all as specified and directed |
| 33 | S&F in replacement MCBs single pole (SP) 5 to 32 Amps with 10 KA breaking capacity of 'B' series in distribution boards complete all as specified and directed. |
| 34 | S&F in replacement MCBs single pole and neutral (SPN) 5 to 32 Amps with 10 KA breaking capacity of 'B' series in distribution boards complete all as specified and directed. |
| 35 | S&F in replacement MCBs single pole and neutral (SPN)/isolator 40 Amps with 10 KA breaking capacity of 'B' series in distribution boards complete all as specified and directed. |
| 36 | Supply and fixing in repair/replacement blanking plate complete all as specified and directed |
| 37 | Taking down the unservicable /brunt sub main wiring from wooden batten and M & L for submain wiring in and including PVC conduit 1.8 mm thick, 20 mm dia with two run of PVC insulated, unsheathed multistranded copper conductor of 4 sqmm(FRLS) and one run of PVC insulated,unsheathed multistranded copper conductor 4 sqmm (green in colour) for earth continuity conductor and connected to common earth dolly with thimble including cutting chases in brick wall, replastering and making good to match the existing specfication complete all as specified and directed. (Two run of 6 sqmm plus one run 4 sqmm of earth wire will be measured as 1RM) Note: (i) (a) Insulation test of point wiring (b) colour coding is to be maintained. (Ph-Red, N-Black, Earth- Green) (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper cable on run of 4.0sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit. |
| 38 | S&F in replacement electric bell ding dong AC single phase 220 volts, complete all as specified and directed |
| 39 | S& F for modular switch for 6A one way complete all as specified and directed. |
| 40 | S &F for modular switch for 16A one way with indicator complete all as specified and directed. |
| 41 | S &F for modular socket for 6A, 5 Pin complete all as specified and directed. |
| 42 | S &F for Modular socket for 6A/16A 3 pin combined complete all as specified and directed. |
| 43 | Supply and fixing for modular fan step regulator, 120W - 2 module complete all as specified and directed. |
| 44 | Supplying & Fixing modular Bell push, 6 amp, two module complete all as specifed and directed. |
| 45 | S&F modular white cover platewith frame 8 modular complete all as specifed and directed . |
| 46 | S&F modular white cover platewith frame 6 modular complete all as specifed and directed . |
| 47 | S&F modular white cover platewith frame 4 modular complete all as specifed and directed . |
| 48 | S&F modular white cover platewith frame 3 modular complete all as specifed and directed . |
| 49 | S&F modular white cover platewith frame 2 modular complete all as specifed and directed . |
| 50 | S&F modular white cover platewith frame 1 modular complete all as specifed and directed . |
| 51 | S&F in repair/replacement in repair Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with including 9 W LED complete all as specified and directed. |
| 52 | Taking down old /unserviceable ceiling light any type and rating and Supply and fixing ultra modern recess mounting luminarie suitable for armstrong/grid/POP ceiling of auditorium complete with separate electronic driver and high brightness SMD LEDs suitable for 36 watts LED, 5700K, of fixture size 595x595 mm complete all as specified and directed. |
| 53 | Supply and fix in repair/replacement recess mounted circular LED slim fit low profile down lighter of capacity 18 watt, complete all as specified and directed. |
| 54 | S&F in repair/replacement in repair 15 watt New generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Opal Cover offers soothing uniform illumination for different applications.complete all as specified and directed. |
| 55 | Supply and fixing LED lights fitting of 20W, 220 volt AC, Surface mounting for General Purpose and Extruded Aluminium housing alongwith driver, holder, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 56 | S&F in repair/replacement of false ceiling light 15 watt Aesthetically designed 1x1, LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination complete all as specified and directed. |
| 57 | Supply & fix in repair of driver of 2' x 2' ceiling light complete all as specified and directed. |
| 58 | Supply and fixing LED light fitting mirror type Surface mounting General Purpose LED Battens in Extruded Aluminium housing with suite variety of application areas with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 59 | Supply and fixing in repair/replacement MCB, TPN 415 volts, 63 Amps, (Ics=100%Ics) capacity complete all as specified and directed. |
| 60 | Taking down ceiling fan/cabin fan and dismantling fan blade, dismantling electric connection, removing capacitor, checking of bearings/bushes, cleaning the fan blades with clear water, scrapping the fan blades, placing the bearing, bush, capacitor, rewinding complete (rewinding, bush, bearing, capacitor, twin core, flexible cable will be paid under relevant items) reassembling the ceiling fan complete after greasing, oiling, testing the same & making the fan serviceable of any sweep and re-hanging and connecting up to the ceiling rose complete all as specified and directed. |
| 61 | All as per iterm No 60 above, but for exhaust fan 300 to 450mm sweep, any type. |
| 62 | M&L for Re-winding in repair/replacement of ceiling fan motor of 1200/1400 mm sweep size including removing old burnt wire copper wire as per existing gauge & insulated paper, varnishing including cleaning/greasing complete. Note:- Taking down & refixing of ceiling fan for winding, painting, replacement of bearing, bush, capacitor and like will be measured & paid separately. |
| 63 | M&L for Rewinding in repair/replacement only of exhaust fan of 200 to 450mm sweep with required guage super enameled wire including varnishing, insulation, taping complete all as specified and directed. |
| 64 | Supply & fix in repair/replacement capacitor for fan 4.0 MFD complete all as specified and directed. Make: ASIAN,EPCOS,USHA |
| 65 | Supply & fix in repair/replacement capacitor for fan 3.15 MFD complete all as specified and directed. Make: ASIAN,EPCOS,USHA |
| 66 | Supply & fix in repair/replacement capacitor for fan 2.50 MFD complete all as specified and directed. Make: ASIAN,EPCOS,USHA |
| 67 | Supply and fix in repair/replacement of blade of Exhaust fan 300 mm to 450mm sweep as existing complete all as specified and directed |
| 68 | Supply and fix in repair/replacement ball bearing 6201. complete all as specified and directed Make:-SKF/TATA/FAG. |
| 69 | Supply and fix in repair/replacement ball bearing 6202. complete all as specified and directed Make:-SKF/TATA/FAG. |
| 70 | Supply and fix in repair/replacement ball bearing 6203. complete all as specified and directed Make:-SKF/TATA/FAG. |
| 71 | Supply and fix in repair/replacement ball bearing 6204. complete all as specified and directed Make:-SKF/TATA/FAG. |
| 72 | Supply and fix in repair/replacement rubber bush for capacitor complete all as specified and directed. |
| 73 | Supply and fix in repair/replacement split pin complete all as specified and directed. |
| 74 | Supply and fix in repair/replacement rubberreel complete all as specified and directed. |
| 75 | M&L for painting one coat of ceiling fan 1200/1400mm sweep complete in situation with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning of dust etc of any sweep writing of MES No on ceiling fan any sweep after painting with suitable size of stansile and super enamelled black paint complete all as specified and directed. |
| 76 | Supply and fix in repair/replacement down rod 12 mm dia made out of high density mild steel 1800mm long as per approved sample complete all as specified and directed. |
| 77 | Supply and fix in repair/replacement controller PCB for BLDC fan 1200 mm sweep as per approved sample complete all as specified and directed. |
| 78 | Supply and fix in repair/replacement of exhaust fan bracket with frame with its nut and bolts suitable for 300 mm to 450 mm sweep fan as existing complete all as specified and directed |
| 79 | Supply and fix PVC body exhaust fan 230 mm sweep,AC 230 volt 50 HZ complete all as specified and directed |
| 80 | Supply and fix PVC body exhaust fan 300 mm sweep,AC 230 volt 50 HZ complete all as specified and directed |
| 81 | Supply and Fix shackle kit with nut bolt for ceiling fan of existing size complete all as specified and directed. |
| 82 | Supply and Fix Louver shutter of exhaust fan 300 mm sweep made of 16 gauge of existing size complete all as specified and directed. |
| 83 | Supply and Fix Louver shutter of exhaust fan 450 mm sweep made of 16 gauge of existing size complete all as specified and directed. |
| 84 | Taking down carefully old geysers 50 / 25 litres capacity of any make including dismantling and fixing of following part and refixing the geysers in the position after testing complete all as directed. The unit rate quoted shall be inclusive of fixing of spare parts and supply only sparts shall be measured and paid separately under relevant items of this schedule. |
| 85 | Supply and fix in repair/replacement Thermostat of water heater for 25 Ltrs capacity AC 230V complete all as specified and directed. Make:- Theta/Bajaj/Danfoss |
| 86 | Supply and fix in repair/replacement Water heater heating element for 25 Ltrs capacity 1.5 KW complete all as specified and directed . Make:- Theta/Bajaj/Danfoss |
| 87 | Supply and fix in repair/replacement Water heater heating element for 50/25 Ltrs capacity 2 KW complete all as specified and directed. Make:- Theta/Bajaj/Danfoss |
| 88 | Supply and fix in repair/replacement flexible hot water pipe of length not less than 600 mm with washer for hot and cold water for geyser connection complete all as specified and directed |
| 89 | Supply and fix in repair/replacement Indicator lamp (red, green) including necessary connection in geyser capacity of 25/50 Ltrs complete all as specified and directed. Note:- Rate quoted by tenderer is for each neon lamp. |
| 90 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspensionwire, one twin core cable flat or circular solid conductor of size 10 sqmm complete all as specified and directed . |
| 91 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspensionwire, one twin core cable flat or circular solid conductor of size 16 sqmm complete all as specified and directed . |
| 92 | Supply and fix in repair/replacement 2.5 Sqmm three core PVC insulated, unsheathed multistranded copper conductor flexible cable1100 volts grade complete all as specified and directed |
| 93 | S&F in repair/replacement PVC insulated insheathed multi stranded copper conductor single core of capacity 1.5 sq mm FRLS cable. complete all as specified and directed. |
| 94 | S&F in repair/replacement PVC insulated insheathed multi stranded copper conductor single core of capacity 2.5 sq mm FRLS cable. complete all as specified and directed. |
| 95 | Supply and fix in repair/replacement Geyser syphon Assembly 6 hole/9 hole of water heater for 25 Ltrs capacity AC 230V. Make:- Theta/Bajaj/Danfoss complete all as specified and directed |
| 96 | Supply and fix in repair/replacement Gasket set of water heater for 25 Ltrs capacity AC 230V complete all as specified and directed . |
| 97 | Supply and fix in repair/replacement Thermal cutout of water heater for 25 Ltrs capacity AC 230V complete all as specified and directed . |
| 98 | Supply and fix in Pressure reducing valve of water heater for 25/50 Ltrs capacity AC 230V complete all as specified and directed. |
| 99 | Supply and fix in Pressure release valve dead weight type of water heater for 25 Ltrs capacity AC 230V complete all as specified and directed. |
| 100 | Supply and fix in Fusible Plug of water heater for 25/50 Ltrs capacity AC 230V complete all as specified and directed. |
| 101 | Supply and fix in Anti Vaccum valve of water heater for 25/50 Ltrs capacity AC 230V.complete all as specified and directed . |
| 102 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp complete all as specified and directed. Please Enable Macros to View BoQ information |
| 103 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender