Tender For special Repair To Bldg No T-3 And Connected Area At Bsa Complex Under Ge Alipore Kolkata.
Tender Value
24.25 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
3 days left
EMD
48510
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-3 And Connected Area At Bsa Complex Under Ge Alipore Kolkata.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quions, arches, pillers etc including removal of debris outside MoD land complete all as specified and as directed. |
| 2 | Dismantiling of Plain or corrugated, semi-corrugated, etc) steel sheeting any gauge, thickness, including Nainital or similar pattern in roof coverings and including removal of debris outside MoD land complete all as specified and as directed. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 sqm and not exc 4 Sqm each and removing from site complete all as specified and as directed. |
| 4 | Dismantling of timber scantlings in fillet, rails, posts, rafters, purlins, etc under 40 sq.cm in section, in any postion framed work complete all as specified and as directed. |
| 5 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 6 | Dismantling wrought iron or mild steel works of any description not otherwise provided for complete all as specified and as directed. |
| 7 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in soft/loose Soil complete all as specified and as directed. |
| 8 | Returning, filling soils in trenches including spreading leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. |
| 9 | Removing excavated material soils in exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed. |
| 10 | M&L for providing plain cement concreate (1:4:8) type D2 (using 40 mm gradeed stone aggregrates) as in foundations filling, coping for pole and mass concreate complete all as specified and as directed. |
| 11 | M&L for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 12 | M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walling built in cement mortar 1:4 complete all as specified and as directed. |
| 13 | M&L for anti-termite treatment for treating the bottom and sides of excavation at the rate of 5 ltrs of emulsion per sqm of surface area complete all as specified and as directed. |
| 14 | M&L for form work to sides of pillar, post struts pier column, stanchions for rough concrete surfaces complete all as specified and as directed. |
| 15 | M&L for RCC Type B1 (1:2:4) using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels etc complete all as specified and directed. |
| 16 | All as per BoQ Serial Item No.15 above but as in cloumns, etc |
| 17 | M&L for Damp proof coarse to horizontal or vertical surfaces including necessary form work in PCC(1:2:4), type B-0, 25mm thick complete all as specified and as directed. |
| 18 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs,etc. also splays between floors and beams, etc. for rough finished concrete surfaces complete all as specified. |
| 19 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished concrete surfaces complete all as specified and as directed. |
| 20 | M&L for RCC Type B1 (1:2:4) using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 21 | M&L for RCC Type B1 (1:2:4) using 20 mm graded stone aggregate as in Chhajja and in shelves and the like complete all as specified and directed. |
| 22 | M&L for mild steel TMT bars of 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 23 | M&L for mild steel TMT bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 24 | M&L for 10mm thick plastering as in ceiling surfaces in CM (1:3) surface finished even and smooth without using extra cement complete all as specified and directed. |
| 25 | M&L for 15mm thick rendering on fair faces of brick wall or concrete surfaces in CM (1:4) surface finished even and smooth without using extra cement complete all as specified and directed. |
| 26 | M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in CM (1:6) surface finished even and smooth without using extra cement complete all as specified and directed. |
| 27 | Preparing surfaces of new decorated plastered or unplastered surfaces of wall, pillasters, cornices etc and M&L for applying two coats of acrylic distemper over & including 1mm thick wall care putty complete all as specified and as directed. |
| 28 | Preparing new decorated plastered or unplastered surfaces of ceilings, pillasters cornices etc and M&L for applying 1mm thick wall care putty with & including two coats of acrylic distemper emulsion complete all as specified and as directed. |
| 29 | M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 30 | M&L for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10 mm thick rendering in cement mortar 1:4 including grinding & polishing etc complete all as specified and as directed. |
| 31 | M&L for broken stone boulders hard core, broken to gauge n exc 63 mm,deposited, spread and levelled in layered n.exc. 15cm thick, watered and rammed to a true surfaces complete all as specified and as directed. |
| 32 | M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in floors finished even and fair surfaces complete all as specified and as directed. |
| 33 | M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over & including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 34 | M&L for Machine cut kota stone slab 18-20mm thick over in riser of steps, skirting, dado and pillar laid over cement rendering and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over & including 15mm thick rendering bed in CM 1:4 complete all as specified and as directed. |
| 35 | M&L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 36 | M&L for 50mm thick sand cusion under layer of floor complete all as specified and as directed. |
| 37 | M&L for machine pressed precast coloured concrete interlocking paver block any shape and size (Rubber moulded) confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment complete all as specified and directed. |
| 38 | M&L for 20 mm thick pre-polished cement concrete designer coloured cheuered tiles, glossy finish as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 39 | M&L for providing cement concrete type B-1,1:2:4 (using 20 mm graded stone aggregates) as in benching concrete, coping, hold fast etc complete all as specified and directed. |
| 40 | S&F powder coated aluminium sliding windows for (three tier) with shutter styles 40mm X 20 mm sheet thickness 1.5 mm two shutter glass and one shutter of wiremess consisting of Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 100 mm X 44 mm X 1.5 mm thick section with or without rebate 5 mm thick tinted glass fixed with aluminum beads locking arrangements with each shutter including aluminum grill complete all as specified and as directed. |
| 41 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick mangloor pattern of any colour any shape having tensile strength of 550 Mpa as in roof covering/chadding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 42 | M&L for suspended false ceilling system using metalic exposed suspended system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) cross tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x 22.2mm x 0.65 mm thick (thickness comprising of GI/0.35 + PPPCGS/0.3 mm & weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (placed in the grid system duly suspended with 4 mm dia GI bars hangers fixed with steel dash through fasteners from purlins of the roof with necessary fittings and fixtures etc complete all as specified and as directed. |
| 43 | S&F for steel work in MS tubes (round/square) including special shaped washer, necessary FI angle iron if required to complete the works as in truss, purlins, rafter, stanchions etc using ERW or induction butt welded tubes conforming to IS-1161-1979 graded St-240 complete all as specified and directed. |
| 44 | Preparation of new steel surfaces of any description over 10cm width or girth and M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 45 | M&L for light shade vitrified ceramic tiles,10mm thick (square/rectangular) polished, area of each tiles n. exceeding 0.36 sqm over & including 15 mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 46 | All as per BoQ Serial Item No.45 above but as in skirtings, dado etc over & including 10 mm thick cement plaster in CM (1:4) complete all as per specified and directed |
| 47 | S&F 2nd Class HW plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chanfered, put together with glue pinned at joints complete all as specified and as directed. |
| 48 | S&F 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and as directed. |
| 49 | S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast al alloy complete all as specified and as directed. |
| 50 | M&L for two coats of synthetic enamel paint over a coat of pink primer area exc.10cm width or girth over new wooden surfaces including preparation of surfaces complete all as specified and as directed. |
| 51 | S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 52 | S&F 150 mm long Aluminium handles, cast type, anodised complete all as specified and as directed. |
| 53 | S&F Stainless steel butt hinges medium weight 100mm long etc complete all as specified and directed. |
| 54 | M&L for 25x4mm size mild steel flat iron as in hold fast conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 55 | M&L for cement concrete type C1 1:3:6 (using 20mm graded stone aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings/hold fast, kneelers, apex stones, bed plates, kerbs water troughs and the like including or chamfered angles and throating, complete all as specified and directed |
| 56 | S&F Mild Steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, railings and similar work conforming to Fe-290 Gde E-165, design/shape as approved by Engineer-in-charge complete all as specified and as directed. |
| 57 | M&L for 75mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregates as in plinth protection, sub base similar works complete all as specified and as directed. |
| 58 | S&F solid PVC mouded door frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 59 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face with partical board core complete all as specified and as directed. |
| 60 | S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 61 | S&F 150 mm long aluminium handles, cast type, anodised complete all as specified and as directed. |
| 62 | S&F stainless steel butt hinges medium weight 100mm long etc complete all as specified and directed. |
| 63 | S&F sliding 3 track uPVC window with uPVC multicavity section made of 108x48x2.5mm suitable reinforced of G.I. channel of 1.2mm thick having upward projection track for sliding shutter. Shutter shall be made out of uPVC muticavity section of 85x38x2.5mm having suitable reinforement of G.I. C channels having provision to fit roller & Glass fixing with TPE rubber with proper glass bid & welded in corner with suitable locking system. by using above section, windows can be in different type like 2 glass 1 net complete all as specified and as directed. |
| 64 | Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) including removal of debris outside MoD land complete all as specified and as directed. |
| 65 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or colouredcement to match the shade of tiles over and including screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed. NOTE: Work shall be executed in bldgs upto 12 stories high. |
| 66 | M&L for colour printed glazed ceramic tiles (Premium quality) (450X300mm) X 7mm thick as in walls set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 10 mm thick cement plaster in CM (1:4) complete all as specified and as directed. |
| 67 | Taking up or down 15mm steel tubing and connections, complete all as specified and as directed. |
| 68 | Taking up or down 20mm steel tubing and connections, complete all as specified and as directed. |
| 69 | Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed |
| 70 | Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed |
| 71 | S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed. |
| 72 | S&F in repairs 15mm bore Brass CP bib cock fancy type with chromium plated crutch or butterfly handle complete all as specified and as directed. |
| 73 | S&F in repairs Vitreous China wash basin ( white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and as directed. |
| 74 | S&F in repairs Vitreous China wash basin (coloured), Pedestral pattern, boul size 580 x 450 mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets, complete all as specified and as directed. |
| 75 | S&F 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins,etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 76 | S&F in repairs 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 77 | S&F in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 78 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 79 | S&F in repairs towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type with brass chromium plated screw complete all as specified and directed. |
| 80 | M&L for Cutting grooves/chases in cement concrete or brick wall / floor for taking down of GI pipe line and making good the disturbed surfaces to match with existing specification complete all as specified and as directed. |
| 81 | S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall etc, complete all as specified and directed. |
| 82 | S&F in repairs Vitreous China Urinal, half stall type, white and 32mm waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) suitable for urinals, incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) etc, complete all as specified and directed. |
| 83 | S&F in repairs wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and to flush pipe etc. and making good the damaged surfaces complete all as specified and as directed. |
| 84 | S&F PVC water closet seat cover heavy duty coloured closed pattern with flat bottom and cover and mild steel CP hinnging device complete all as specified and as directed. |
| 85 | S&F CP hand shower ( faucet) with one mtr flexible tube with wall hook complete all as specified and directed. |
| 86 | S&F in repairs brass CP toilet paper holder to wall with chromium plated brass screws complete all as specified and as directed. |
| 87 | S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and as directed. |
| 88 | S&F in repairs 15mm bore Brass CP angular stop cock concealed or any type with crutch or butterfly handle complete all as specified and as directed. |
| 89 | S&F in repairs PVC connection 15 mm size pipe with PTMT nut of Length 450mm complete all as specified and as directed. |
| 90 | S&F in repairs 15mm bore two way bib tap CP fancy type with chromium plated crutch or butterfly handle complete all as specified and as directed. |
| 91 | S&F 40mm bore CPVC pipe with fittings complete fixed in wall/laid in floor complete all as specified and as directed. |
| 92 | S&F curtain rods decorative aluminium alloy with fixing brackets including taking down old pelmet box making wood on wall complete all as specified and as directed. NOTE: Work shall be executed in bldgs upto 4 stories high. |
| 93 | S&F bracket decorative type for curtain rods aluminium alloy complete all as specified and as directed. NOTE: Work shall be executed in bldgs upto 4 stories high. |
| 94 | Dismantalling of existing water tank and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank, ISI marked, (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I, with & including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. |
| 95 | Taking down carefully copper/aluminium point wiring (light, fan, socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. complete all as specified and as directed. |
| 96 | M&L for point wiring for one light/ bell/ fan controlled by one number one way switch for 5Amps SSC complete with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of modular type galvanized MS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover plate of suitable modules with fixing screws, for fixing of modular type switches / socke t/ Fan regulator etc. complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed.Note : Proper colour code of wiring to be maintained. |
| 97 | All as per BoQ Serial Item No.96 above but for 5 Amps Socket on same board complete all as specified and directed. |
| 98 | All as per BoQ Serial Item No.96 above but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed. |
| 99 | S&F ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V complete all as specified and as directed. |
| 100 | S&F modular type switch, one way, 6 Amps, 1 module complete all as specified and as directed. |
| 101 | S&F modular type socket, 5 pin, 6 Amps, 2 module complete all as specified and as directed. |
| 102 | S&F Modular type socket, 5 pin, 16 Amps, 2 module complete all as specified and as directed. |
| 103 | S&F Modular type switch, one way, 16 Amps, 1 module complete all as specified and as directed. |
| 104 | M&L for making hole for fixing the exhaust fan of size 250mm and making good the surface as per existing complete all as specified and as directed. |
| 105 | S&F exhaust fan, PVC body of size 250mm heavy duty of single phase complete all as specified and as directed. |
| 106 | S&F Modular type fan regulator, step type (2 module)120 Watt complete all as specified and as directed. |
| 107 | S&F LED tube light fitting 4 ft, 18/20 watt, 230 volt energy efficient comprises of extruded PVC housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 108 | M&L for circuit/sub-main wiring with two run of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through concealed PVC conduit complete all as specified and as directed.Note : Three runs of 4.0 Sqmm cable shall be measured as one unit length. |
| 109 | M&L for cutting existing metal/bituminus road/PCC walk way/any type of tile works n.exc 0.45m width and n.exc 0.90 m in depth including all connected earth work and making good disturbed surfaces matching with the existing specification and finish including refixing of old tiles including removal of debris outside MoD land complete all as specified and as directed. |
| 110 | S&F GI pipe medium grade 50mm dia with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed. |
| 111 | S&F in repairs 50mm bore Gun metal gate valve conforming to IS -778 with iron wheel head, screwed both ends on GI pipes with GI union complete all as specified and as directed. |
| 112 | S&F MCB 06 Amps to 32 Amps, single pole, 240 Volt \\"C\\" series, breaking capacity 10 KA complete all as specified and as directed. |
| 113 | S&F AC power supply unit 6 module consisting of in built modular motor starter, plug top, 20 Amp Socket and box duly fixed/grouted on wall complete all as specified and as directed. |
| 114 | S&F Ceiling fan with blades, down rods and accessories, 230 V, 1200 mm sweep, BEE 5 star, motor type BLDC complete all as specified and as directed. |
| 115 | Supply and laying for under ground heavy duty XLPE insulated, armoured, stranded aluminium conductor cable, 1100 volts grade, cross-sectional area 10 sq. mm 4 core in trenches / through pipe in road crossing / plinth/ drain/ duct/ floor along pole / wall /ceillings etc complete all as specified and as directed.Note:- Earth work, bricks protection, sand cushioning shall be measured and paid seperately. |
| 116 | Supply and laying for under ground heavy duty XLPE insulated, armoured , stranded aluminium conductor cable 1100 volts grade, cross-sectional area 25 sq. mm 4 core in trenches / through pipe in road crossing / plinth/ drain/ duct/ floor along pole / wall /ceillings etc complete all as specified and as directed.Note:- Earth work, bricks protection, sand cushioning shall be measured and paid seperately. |
| 117 | S&F in repairs Sheet metal enclosure MCCB DB double door, vertical type Triple pole & neutral 4 way with fully insulated 250 Amp copper bus bar for each phase, with 2 neutral bar, 2 earth bar and cable ties for cable management suitable for mounting MCB SP 12 Nos Out going and 01 No incoming MCCB of capacity upto 160 Amp complete all as specified and as directed.NOTE:- MCCB & MCB's shall be measured and paid separate items. |
| 118 | S&F in repairs as MCCB, thermal and magnetic release adjustable type, 4 pole, 125 Amps with breaking capacity 25 KA, 415 volts complete all as specified and directed. |
| 119 | S&F GI pipe medium grade 25mm Tubes with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and as directed. |
| 120 | S&F in repairs 25mm bore gun metal gate valve conforming to IS -778 with iron wheel head,screwed both ends on GI pipes with GI union complete all as specified and as directed. |
| 121 | M&L for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 32 x 6mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion complete all as specified and as directed. |
| 122 | S&F galvanised iron strip of size 25 X 3 mm as earth continuity conductor or main earthing strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed with poles or any other indicated sitution for loop earthing etc as required complete all as specified and as directed. |
| 123 | S&F End termination of LT Underground cables suitable for 4C 10Sqmm to 240 Sqmm 3.5C by providing single compression type chromium plated heavy duty brass cable glands including check nuts etc.and heavy duty aluminium cable lugs of suitable size including cutting holes in the gland plate and connection complete in the panel board by providing galvanised steel bolts,nuts, flat washers & spring washers complete all as specified and as directed. |
| 124 | S&F Heat Shrink type straight through cable jointing kit for 1.1 KV grade Under Ground XLPE insulated Aluminium Cable complete with Jointing material and other connected accessories suitable for 3.5 / 4 core 10 to 240 sqmm complete all as specified and as directed. |
| 125 | Disconnecting and taking up old unserviceable cable Pipe from trench cable tray etc and keeping aside for removal from site complete all as specified and as directed. |
| 126 | S&F 4.00 mm dia GI wire for connection of earthing to the DB complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender