Tender For Installation Of Closed Combustion Cremation Furnace Under Budget Declaration 2026-27
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Aug 2026
5 days left
EMD
17100
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Closed Combustion Cremation Furnace Under Budget Declaration 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 2 | Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m² |
| 3 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: |
| 4 | Antyesthi Yantra:(A) Body M.S. Sheet Size 3mm & 2mm angle structure 50x50x5mm MS(B) Lining fire bricks alumina 30% with ceramics board thickness 50mm capacity 1260 C(C) White heate castable (k) & accoset (50) for fire bricks feting(D) Angle 65x65x10 & 35x5 SS 304 grade(E) Rod 30mm 370mm SS 304 grade(F) Pipe OD 40mm thickness 5mm SS 304 grade(G) Ceramic blanket (64D) total bolts & nut MS & SS(H) Thermostate size 20mm ODx450mm length(I) Control panel auto and manual both with change over/2 way switch(J) Blower complete with fan size 305 mm with 1 HP motor Nos. 2 (K) Chimni Length 3 meter size 350x350mm tapper sheet thikness 3mm with ceramic board lining(L) Ceramics board fitting 50 mm and 25 mm(M) Both side MS door with lock size – 600x550mm thickness 5mm MS 50mm ceramic board and ceramic blanket(N) Sliding Trolly alignment bed angle size 50x50mm + 35x35mm + strip, length 4.5 meter(O) Sliding Trolly cover 1750x1180x440 mm sheet size 3 mm with bearing roller(P) Sliding Asthiya & Ash collecting Trey Size 2200x350x110 mm sheet thickness 3mm with roller SS 304 grade(Q) Coated with heat resistance paint with capacity of 600 degree silver colour(R) Two Step fabricated checker plate and angle size 6'x2'x1' qty 2 including loading, unloading and Transportation etc. |
| 5 | SITC of Inverter with batteries with - O/P Voltage - 220V, O?P Current 12 amp AC Nominal, I/P current 12 amp AC max, O/P power -2 KVA Power factor-0.8, frequency - 50Hz including 12V 150 Ah Battery Rack and battery bank comparing SMF/VRLA batteries, inter-connection wiring etc. as required complete in all respect Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender