Housing Urban and Rular Development Local Bodies Closing in 12 days TDR #56741903

Tender For Construction Of Community Sanitary Complex In Block Ghagwal Under The Scheme Sbm-G For The Year 2026-27

Issued by Local Bodies · Samba, Jammu and Kashmir
Tender Value
2.97 Lakhs
Estimated cost
Bid Submission
12 Aug 2026
12 days left
EMD
5940
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Samba → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Community Sanitary Complex In Block Ghagwal Under The Scheme Sbm-G For The Year 2026-27

BOQ

Name of Work:- Construction of Community Sanitary Complex in Block Ghagwal under the scheme SBM-G for the Year 2026-27
Sl. No. Item Description
1Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kind of soil, Disposal of 1 mtr from cutting edge.
2Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
3Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
4Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)
6Half Brick Masonary in (1:4) mix cement mortar for super structure upto floor level V.
7Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)
8Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
9Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more
10centering & Shuttering incl. propping and removal of same in…Foundation and footings
11centering & Shuttering incl. propping and removal of same in Suspended floors & Soffits of Slab
12centering & Shuttering incl. propping and removal of same in Edges of slab
13Providing and Applying 12 mm thick Cement plaster in (1 cement: 6 fine sand) mix.
14Providing and Applying 6 mm thk. C.plaster in 1:3 mix for ceilings
15Providing and Applying neat cement punning to plastered sufrace.
16Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
17Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge over 12mm thick cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
18Providing & fixing electric points incl. Laying of conduit pipes, fan box & wires of required thickness and approved make as per the Engineer-in-charge incl. Fixing of switches, lamp holder, complete job.
19Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap,10 litre low level P.V. C. flushing cistern including flushpipe (of approved make Cera, Jaguar, Hindware) \\"manually controled device conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests (Cera, Jaguar, Hindware).
20Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of approved make (Cera, Jaguar, Hindware).
21Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China wash basin size 500x400 mm with single 15 mm C.P. brass pillar taps with elbow operated levers of approved make (Cera, Jaguar, Hindware).
22Providing and fixing of stainless steel C.P Grating of required size (100mm)dia
23Providing and fixing c.p brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore
24Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 15 mm nominal bore
25Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge 20mm nominal outer dia pipes.
26Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge 20mm nominal outer dia pipes.
27PVC floor trap
28Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes with necessary fittings but without base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].
29Providing and Fixing 1 mm thick M.S.Sheet door with frame of 40x40x6mm angel iron and M.S gusset plates at the junction and corners.all necessary fitting,including applying a primer coat of approved coat steel primer.
30Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm)
31Painting steel work with synthetic enamel paint ( new work) excluding priming coat of appeoved coat of steel primer.
32Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design.
33Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 75 mm diametre
34Providing and fixing PVC pipe for drain out water. (Finolex/Supreme make) 75mm dia
35100 mm dia
36Carriage of materials of sand within av. Lead of 1 km by M.T
37Carriage of materials bajri and stone agg. within av. Lead of 4 km by M.T
38carriage of bricks within av. Lead of 16 km by M.T Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56741903
AUTHORITY Local Bodies
TENDER VALUE 2.97 Lakhs
LAST DATE 12-08-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Construction Of Community Sanitary Complex In Block Ghagwal Under The Scheme Sbm-G For The Year 2026-27
Basic Detail
Tender No 44 REW Samba of 2026-27, Dated 29.07.2026
Bidding Type Tender
Location
City Samba
State Jammu and Kashmir
Key Dates
Publish Date 30 Jul 2026
Submission Date 12 Aug 2026
Open Date 13 Aug 2026
Finance
Tender Value 2.97 Lakhs
Tender Fee 600
EMD 5940
Exemption Not Available
Document List
BOQ_1051035.xls
d605fd70-08c3-4c48-938c-5742c47c54c5.html
Tendernotice_1 (10).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 30, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 12, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Aug 13, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1051035.xls

html

d605fd70-08c3-4c48-938c-5742c47c54c5.html

pdf

Tendernotice_1 (10).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders