Tender For Replacing Damaged /Termite Eaten Cabinets In Various Areas Like Ward C 42, Ward C 62, Ward A 36, Ward A 43, Ward C64, Ward C 61, Ward C51, Ward A 15, A 16 Etc, providing and Fixing False Ceiling In Micro Biology Lab, Replacing Glass Rubber
Tender Value
35.48 Lakhs
Estimated cost
Bid Submission
07 Aug 2026
5 days left
EMD
70964
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacing Damaged /Termite Eaten Cabinets In Various Areas Like Ward C 42, Ward C 62, Ward A 36, Ward A 43, Ward C64, Ward C 61, Ward C51, Ward A 15, A 16 Etc, providing and Fixing False Ceiling In Micro Biology Lab, Replacing Glass Rubber In Various Sections And Other Repairs As Per Requirement In Gmch, Sector 32, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. DSR No.15.25 |
| 2 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR No.15.60 |
| 3 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. DSR No.21.20 |
| 4 | Pre-laminated particle board with decorative lamination on both sides. DSR No.21.2.2 |
| 5 | Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with the help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with the help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : DSR No.12.54 |
| 6 | GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyesterpowder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. DSR No.12.54.2 |
| 7 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR No.9.83 |
| 8 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin-charge. 21.4.1 With stainless steel cover plate minimum 1.25 mm thickness. DSR No.21.4 |
| 9 | Dismantling of wooden storage cabinet including chowkhats, shutters, holdfasts etc ( Front section shall be measured for payment ) including stacking the serviceable material and removing the rubbish and disposing off it to approved dumping ground to the entire satisfaction of engineer in charge. NS |
| 10 | Providing and fixing wooden storage cabinet under work top 2'-0\\" high & 2'-0'' deep consisting of 19mm thick commercial board ISI marked with 6mm thick commmercial ply on back side including 1 Nos. Horizontal shelf ( as per sketch) . The front side of the cabinet shall be provided with 1mm thick laminate of approved shade and inner surface shall be provided with 0.70mm thick laminate including 20mmx 6mm thick second class teak wood lipping on exposed edges of the board. The rate further include the cost of piano type hinges , S.S handles 4\\"size, aluminium hasp & staple, magnatic catcher, stainless steel adjusters / lifters, fevicol, nails , screws complete fixed in position tothe entire satisfaction in the Engineer-in-charge. ( Front elevation area shall be measured for payment). NS |
| 11 | Removing existing glass panes in aluminium door, window, ventilator shutters and fixed aluminium partitions carefully and refixing the glass panes with new EPDM rubber/ neoprene gasket etc. complete to entire satisfaction of engineer-in-charge. NS |
| 12 | Extra for Cleaning on KOTA stone/ Chips flooring work wherever required to give high gloss finish complete in all respect to the engineer-in-charge. NS |
| 13 | Providing and fixing aluminium hanging floor door stopper, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. NS |
| 14 | Providing and fixing Rough cheseled Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick (N.S. Based on 11.26.1) NS Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender