Tender For Relinig Work Of Nohar Disty Jasana Major Malwani Minor Sub Minor Birkali Lalpura Karoti Lalana Appuwala Charanwali Raisinghpura Phephana Minor Hanumangarh
Tender Value
67.42 Crore
Estimated cost
Bid Submission
31 Aug 2026
32 days left
EMD
1.34 Crore
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hanumangarh → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Relinig Work Of Nohar Disty Jasana Major Malwani Minor Sub Minor Birkali Lalpura Karoti Lalana Appuwala Charanwali Raisinghpura Phephana Minor Hanumangarh
BOQ
| Sl. No. | Item Description |
| 1 | Part A -Earth Work |
| 2 | Uprooting Juli Flora /sarkanda, pahari kikar or arrows upto 0.50m. depth below ground level. |
| 3 | Felling trees of the girth ( measured at a height of 1 m above ground level ) including cutting of trunks and branches removing the roots and stacking of servicable material and disposal of unserviceable material Lead upto 1000 m ,30 Cm. to below 60 Cm. Girth |
| 4 | Felling trees of the girth ( measured at a height of 1 m above ground level ) including cutting of trunks and branches removing the roots and stacking of servicable material and disposal of unserviceable material Lead upto 1000 m ,60 Cm. to below 120 Cm. Girth. |
| 5 | Silt Clearance/ Removal of blown sand/ Berm Unloading undressed with combined lead upto 50 For FSD upto 1 m.for lined canal section. |
| 6 | Silt Clearance/ Removal of blown sand/ Berm Unloading undressed with combined lead upto 50 For FSD above 2 m.for lined canal section. |
| 7 | Earth work excavation in ordinary soil for distributaries and minors having discharge less than 10 cumecs: Kassi work undressed . |
| 8 | Earth work excavation in ordinary soil for distributaries and minors having discharge less than 10 cumecsEarthwork undressed with combined lead upto 50m.: |
| 9 | Compaction of earthwork by mechanically operated Vibro-Compactor/ any other mechanical means to attain a density 95% of Maximum Dry Density. |
| 10 | Extra on earth work for laying in 15 to 25 cms layers includingDressing & Watering as per specifications (Water to be madeavailable by the department at one place of work site) |
| 11 | Dressing of Earthwork. |
| 12 | Carriage of Good Earth From a Lead of 1 KM. |
| 13 | Earthwork excavation for Lip Cutting in ordinary soil, for disty & minors having vertical height above 0.75 m, kassi work including rehandling with dressing of earthwork. (With extra two initial leads). |
| 14 | Add Extra for earth taken from private land ,land to be arranged by the contractor through private negotitations , item applicable on certification by Ex.En. That no earth is available within canal boundary (ii) For Uncommand Area. |
| 15 | Part B -Lining Work |
| 16 | Rubbing and clearing the surface of existing brick/ tile lining to be used as subgrade both in bed and side slopes by means of wire brushes water/ air applied under pressure through nozzle to get rid of dirt, sand etc. deposited on it, complete in all respect, as per specifications and the instructions of the engineer incharge for preparation of surface. |
| 17 | Providing & Laying M15 Grade Single PCC Block (30x15x5 Cms.) Lining consisting of :- (i) 12mm thick plaster in CM (1:6) on subgrade. (ii) 16mm thick sandwich plaster in CM (1:3) over the plaster at item no. (i) above. (iii) 50mm thick Blocks in CM (1:3) with 6mm thick CM layer including curing upto completion of lining section as per design & specifications. On Side Slope including dressing of sides, scafolding & template allowance, Pummping charges of water to lining heading from source and curing upto 28 days. |
| 18 | Providing & laying M15 grade Single PCC block (30x15x5 cm ) lining consisiting of :- (i) 12 mm thick plaster in CM (1:6) on subgrade (ii) 16 mm thick sandwich plaster in CM (1:3) over the plaster at item no (i) above (iii) 50 mm thick Blocks in CM (1:3) with 6 mm thick CM layer including curing upto completion of lining section as per design & Specification.(a) In bed including dressing of bed , Pummping charges of water to lining heading from source and curing upto 28 days |
| 19 | Providing & Laying 10Cms. thick cement concrete lining,cast insitu M15 grade (minimum cement content 322 Kg/cum ofconcrete) (1cement : 2Bajri (CoarseSand) : 4grit (Gradedcoarse aggregate 20 mm nominal size)) including use ofmechanical mixer, formwork & Vibrator, applying primerconfirming to IS : 3384 on panel side, finishing, etc. as perspecifications complete in all respect including cost of primer.cc . |
| 20 | Providing&Laying7.50Cms. thick cement concrete lining,castin situ M15 grade (minimumcement content 322Kg/cum of concrete) (1cement : 2Bajri (CoarseSand) : 4grit (Graded coarse aggregate 20 mm nominal size)) including use of mechanical mixer, formwork & Vibrator, applying primer confirming to IS : 3384 on panel side, finishing, etc. as per specifications complete in all respect including cost of primer.In Side Slopes, Including pumping, scaffolding, curing, comoposite weigh batching, transit mixer, admixure and paver. |
| 21 | Earthwork in foundations trenches, lift upto 1.5 m. stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15 cm. layers when required into sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 30 m. (For Dowel Earthwork)In ordinary soil like sandy loam, soft clay etc. |
| 22 | Laying in position cement concrete for Canal Dowel including curing, compaction and cost of centering and shuttering in grade M10, 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size. |
| 23 | Laying in position cement concrete for Canal Dowel including curing, compaction and cost of centering and shuttering in grade M15, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size. |
| 24 | Dismantling of existing structures likeculverts,bridges,retaining wallsand other structures comprising of brick masonry,includingdisposalofunserviceablematerialand stacking the serviceablematerial with alllif tand lead of 1000 m as per MoRTH Specification Clause 202.in Cement mortar. |
| 25 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry,cement concrete,wood work, steelwork, including T&P and scaffolding whereve rnecessary,sorting the dismantle dmaterial ,disposal of unserviceable materialand stacking the serviceable material withal llift sand lead of 1000 masper MoRTHSpecification Clause 202.By Mechanical Means Cement concrete. |
| 26 | Dismantling of lining & disposing of the material with in 1/2 km. lead.Single Tile Lining. |
| 27 | Recovery of useful tiles. |
| 28 | Providing and erecting direction and place identification retroreflectorise dsign as per IRC:67 madeofencapsulatedlensty pereflective sheet ingvide Clause 801.3.1.fixed over aluminium sheeting, 2mm thick with area not exceeding0.9 sqm supported onamild steel singleangler on post75x75x6mm firmly fixed to theground bymean siged foundation with M15 grade cement concrete 450x450x 600mm, 600mm below ground level as perapproved drawing and MoRTH Specification Clause801.Directionand Place Identification signs upto 0.9 sqm size board. |
| 29 | Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting andprinting, etc as per drawing and MoRTH Specification Clause 80. |
| 30 | Brick work with common brunt clay FPS Non modular bricks of class designation 100 in super structure above plinth level upto floor 5 level in all shapes and sizes in cement mortar 1:6. |
| 31 | Plaster on new surface on walls in cement sand mortar 1 : 4 including raking of joints etc. complete fine finish: 12 mm thick. |
| 32 | De- watering by tractor 35 to 45 HP fitted with local burma size 8\\"-10\\" dia vertical / horizontal type complete with all accessories. |
| 33 | Supplyof fiberglass reinforcedplastic (FRP) Gaugeplatefor accurate measurement of water level, moulded and sand wichedwith MSstripbothside finish, front sideengraved and moulded compute rized marking of bands and figures coveredin radium,eyepleasent colour combination, laminated with high abrasion grade polyurethene, provision of MS pressed channel for gauge plate more than60 cm width etc. |
| 34 | Part C -Outlet |
| 35 | Dismantling of existing structures likeculverts,bridges,retaining wallsand other structures comprising of brick masonry,including disposal of unserviceable material and stacking the serviceable material with alllif tand lead of 1000 m as per MoRTH Specification Clause 202.in Cement mortar. |
| 36 | Earth work in excavation for foundation of structure complete with all lift, dewatering, shoring and shuttering etc. including refilling of trenches in 250mm layers, ramming, watering and disposal of surplus earth with all lifts and lead upto 1000 meters exclusive of compensation of earth as per MoRTH specification Clause 301 to 305. In ordinary soil depth upto 3 meter . |
| 37 | Providing and laying Structural Cement concrete (Design mix) for plain/reinforced concrete in open foundation as per drawing and technical specification as per MoRTH Specification : Section 1000, 1500, 1700 & 2100 including form work at any level. PCC Grade M-15. |
| 38 | Brick masonry work in cement mortar 1:3, with mechanical mixer in foundation (at any level) complete, including all scaffolding etc. but excluding pointing and plastering as per drawing and technical specification as per MoRTH Specification : Section 1000,1300 . |
| 39 | Structural Cement concrete (cast in situ/ precast/ PSC) upto a height of 5m for reinforced concrete (Design mix) in superstructure complete including steel formwork, scaffolding etc. as per drawing and technical specification as per MoRTH Specification 1500 & 1700, M 25 grade solid slab superstructure. |
| 40 | Providing and fabricating steel reinforcement at any level including cutting, binding, placing in position and binding complete in foundation as per drawing and technical specification as per MoRTH Specification : Section: 1600:TMT/ HYSD Steel reinforcement. |
| 41 | Plaster on new surface on walls in cement sand mortar 1 : 4 including raking of joints etc. complete fine finish: 12 mm thick. |
| 42 | Supplying fixing in position of APM blocks made of CI as per standard specification with adjustable arrangement and required fixtures including transportation to site second stage concreting in (CC 1:2:4) Centering, shuttering, painting with redoxide finishing etc. complete in all respect cost of APM Block (all size) per block. |
| 43 | Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row Providing and layingreinforced cement concretepipe NP3 for culvertson firstclass bed ding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling ,concrete andmasonry works in head wall sand parapets Clause 2905 600 mm dia . |
| 44 | Part D -Cross regulator |
| 45 | Dismantling of lining & disposing of the material with in 1/2 km. lead.single Tile Lining. |
| 46 | Earthwork in foundations trenches, lift upto1.5m. stacking theexcavatedsoil clear fromtheedgeof excavationand then returning the excavated soil in 15 cm. layerswhen required into sidesof foundations etc., consolidatingeachdepositedlayerbyrammingandwateringandthendisposingof all surplus soil asdirectedwithina leadof 30m. |
| 47 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Walls (any thickness) including attached pilasters,buttresses plinth and string COURSE. |
| 48 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies,girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. |
| 49 | Providing and laying cement concreting including curing, compaction etc. complete using stone aggregate 20 mm nominal size in foundation and plinth, excluding cost of shuttering using.M-15 grade mix 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate) |
| 50 | Providing and laying cement concrete for plain/reinforced concrete in open foundation as per drawing and technical specification as per MoRTH specification : Section 1500, 1700 & 2100 including form work at any level. PCC grade M-25 upto 5 metre height. |
| 51 | StructuralCement concrete for reinforcedconcrete insuperstructure at any level complete including steelformwork,scaffoldingetc.asperdrawingandtechnicalspecificationasper DesignmixMoRTHSpecification1500 & 1700. M 25 grade solid slab superstructure. |
| 52 | Providing and fabricating steel reinforcement at any level including cutting, binding, placing in position and binding complete in foundation as per drawing and technical specification as per MoRTH Specification : Section: 1600:TMT/ HYSD Steel reinforcement. |
| 53 | Supplying, and fixing of sluice/ regulator gates using MS plates , channels, Ts, angles, girders of given size and design having suitable brass/gun matel lining, rubber seals etc and desired road length, capston head, clamps keys. |
| 54 | Add extra if worm gears are to be provided in capston. |
| 55 | AddExtraif theopeningsizeisgreater than1Sqmbutupto3sqm(Drawinganddesignshall alsobesuppliedbysupplier,for gates having size more than 1.00 sqm). |
| 56 | Brick masonry work in cement mortar 1:3, with mechanical mixer in foundation (at any level) complete, including all scaffolding etc. but excluding pointing and plastering as per drawing and technical specification as per MoRTH Specification : Section 1000,1300 |
| 57 | Painting of canal gate with 2 pack zinc chromate/phosphate primer in two coat The dry thickness of each coat should be 35 microns and total thickness should not be less than 70 micron .And painting of 2 pack epoxy paint in tree coat of approved color as per Engineer in charge confirming to is 104 |
| 58 | Crusher broken stone grit at site. 20.00 mm nominal size. |
| 59 | Bajri or equivalent screened sand as per ISI specification at site. |
| 60 | Part E - Quarter Repair |
| 61 | Earth work in surface excavation not exceeding 30cm. indepth but exceeding 1.5 meter in width as well as10 Sqm on plan including disposal of excavated earth up to 50 Mtr. and lift up to 1.5 Mtr. disposed soil to be levelled and neatly dressed : All kinds of soil. |
| 62 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate20mm nominal size) .. |
| 63 | Brick masonry with F.P.S. bricks of class designation 75 in foundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand) . |
| 64 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete hunjhunu / Jalore late/Black/Pink Colour) Above 3601 Cm2 Slabs . |
| 65 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar beds . |
| 66 | P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600mm |
| 67 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 30 mm thick Commercial Veneer both side. |
| 68 | Extra for providing external lipping with 2nd class teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over |
| 69 | Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails complete as per approved by engineer in charge. 0.8mm thick mica: |
| 70 | Extra for providing other type of fittings as mention inannexure A ( as approved by EI) : Stainless steel fittings |
| 71 | Providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutter 25 mm to 40 mm thick SS wire gauge 14 mesh x 24 gauge. |
| 72 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: |
| 73 | Providing and fixing 20 mm thick precast terrazo tiles of approved make, with marble chips of size upto 6mm laid over roof with neat cement slurry mixed with pigment to match the shade of the tiles, including cutting ,grinding rubbing with machine complete on 20 mm thick bed of cement sand mortar 1 : 4. |
| 74 | Precast terrazo tiles of approved make, 20mm thick with marble chips of size upto 6mm laid in floors, and landing, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete on 20mm thick bed of cement sand mortar 1 : 4. Dark shade using ordinary cement. |
| 75 | Plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish 12mm thick |
| 76 | Providing and applying white cement based putty overplastered surface to prepare the surface even and smoothcomplete Old Plastered Surface (two or more coats) |
| 77 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: Old work (one or more coats) including scrapping surface and necessary repairs.(a) Colour Change. |
| 78 | Removing dry or oil bound distemper by scrapping sand papering and preparing surface smooth including necessary repairs to scratches by sandla/loi and all scaffolding (for colour changing only) |
| 79 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding Old work (One or more coats). : |
| 80 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade One or more coats on old work. |
| 81 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) |
| 82 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead Of area 3 square meter and below. |
| 83 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.. |
| 84 | P & F Indian type white glazed vitreous china 1 st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 530x410mm. |
| 85 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 450 mm x 300 mm |
| 86 | P & F Looking Mirrors with P.V.C. frame of approved make as per direction of Engineer-in-charge Size 500x400mm. |
| 87 | P & F Premium quality Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make as per Engineer-incharge with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall :. |
| 88 | P & F Kitchen & Lab. Sink of approved make with C.I.brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor : 1.0 mm thick stainless steel AISI -304 & IS 13983-1994 kitchen sink of approved make as per Engineer-in-charge with large waste coupling.Overall size (inches) Bowl size(inches) 18 x 16 x 6 16x14x6 |
| 89 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design 1000 litres capacity. |
| 90 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make P.V.C.heavy duty, 15mm nominal bore. |
| 91 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 15 mm nominal size. |
| 92 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 20 mm nominal size. |
| 93 | P & F Inlet Connection (Angle Valves) Superior quality, ofapproved make, for Wash basin, Gyser etc.2.12.1 C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 94 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories Foradditional technical parameters of product / work. Short point (up to 3 mtr.) |
| 95 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories Foradditional technical parameters of product / work.Medium point (up to 6 mtr.)) |
| 96 | Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) with CM/L no. printed and made out of unbreakable and fire retardant vergin UV Stabilized Polycarbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating ,minimum widthof switch toggle( PUSH PART ) should not less then 20mm, including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work. 10 A one way switch. |
| 97 | Providing & Fixing of modular type lockable feature socket duly made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work A 3/5 pin shuttered socket |
| 98 | Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / 5 step fan regulator 2 Module 360 dgree rotating |
| 99 | Providing and fixing of power plug point with non modular accessories as per PWD specification for electrical Works with Galvanized box of 1.2 mm thick with earth terminal with suitable size phenolic laminated sheet (IS :2036 - 1995) cover including cost of 16 amp. Switch (IS :3854) and 3/6 pin 16 amp. socket outlet making connection , testing , etc. as required. . For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work. |
| 100 | Part F - Officer Building |
| 101 | Earth work in excavation by mechanical means (hydraulic excavator ) manual means in foundaton trenches or drains (not exceeding 1.5 m in width or 10 sum on plan ) including dressing of sides and ramming of bottoms ,lift upto 1.5m including taking out the watering & ramming and disposal of surplus excavted soil as directed with in a lead of 50 meter All kinds of Soil. |
| 102 | Provinding and laying in position cement concrete including curing , compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level M-10 grade nominal mix 1:3:6(1cement :3coarse sand :6 graded stone aggregate 20mm nominal size |
| 103 | Brick work with common burrent clay F.P.S. (Non modular) bricks of class designation 75 in foundation and plinth level in : Cement mortar 1:6 ( 1 Cement : 6 coarse) |
| 104 | Brick work with common burrent clay F.P.S. (Non modular) bricks of class designation 75 in superstrtucture above plinth level upto floor level in all shapes and size in : Cement mortar 1:4( 1 Cement : 4 coarse) |
| 105 | Provinding and laying damp -proof course with cement concrete grade M-15(1:2:4) prepared with 1% solution of water-proof compound complete as per specification . 50mm thick |
| 106 | Centring and shuttering with plywood or steel sheets including strutting propping bracing both ways and removal of formwork for foundation ,footings,strap beam , raft ,bases of columns |
| 107 | Providing and fabricating reinforcement for R.C.C. Work including straightening,cutting,bending,placing in position and binding(including cost of binding wire) all complete upto floor five level Thermo mechanically Treated bar(Conforming of relevent IS code) |
| 108 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix |
| 109 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :12mm thick . |
| 110 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including preparation of base with primer ,putty,lippy etc. complete in all respect. |
| 111 | P & F 1st quality Vitrified tiles on floor, skirting and steps etc. in different sizes ( thickness to be specified by manufactuer ) with water absorption less than 0.08 % and confirming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grouting the joints with white cement and matching pigment etc complete. size 600 mm x 600 mm. |
| 112 | Random rubble dry stone kharanja under floor |
| 113 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 114 | Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : profile A&B |
| 115 | Providing & fixing door, window, chowkhats and otherframes, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade : Sal wood Grade - I. |
| 116 | P&F rigid PVC Pipe (IS:4985 mark) class II (4 Kg /Cm2) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia |
| 117 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) |
| 118 | 15mm nominal outer dia pipes |
| 119 | 25mm nominal outer dia pipes |
| 120 | P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor |
| 121 | P & F Automatic Flushing Cistern of first quality (IS : 774 mark) of approved make fitting, syphon with copper tube, C.I. brackets complete including cutting and making good the wall. PVC Automatic flushing cistern - 10 Litre Capacity |
| 122 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, PVC waste pipe with PVC nut 32mm complete including cutting & making good the wall :Size 450 mm x 300 mm |
| 123 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:Brass 400 grm,15mm nominal bore. |
| 124 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including placing on terrace (at all floors), making connection etc. complete of approved design.1000 Litre capacity. |
| 125 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15 mm Brass (IS:8931 marked). |
| 126 | construction of septic tank in all types of soil with 40CM thick brick mesonary in CM 1:6,15CM thick C.C. bed of 1:5:10 ,M-15 Grade CC flooring & over stone slab covering , 80 mm thick slab ,joiting of slab in CM 1:3 ralthal ,kharanja , 50mm thick stone partition walls, 20mm thick plaster in CM1:6 finished with neat floating cement ,4 nos CI foot rests of approved design , two no 450 mm dia each cement concrete cover with frame , earth work etc. complete as per appoved drawing including disposal of surplus earth within a lead of 50 mtr : size 200*100*130cm(for 10users) |
| 127 | Construction of Soakage well in all types of soil of approved drawing, top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering, jointing of slab in CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.C flooring, earth work etc . complete including disposal of surplus earth within a lead of 50 mtr . Inner dia 60 Cm & 10 to 12 Mtr deep. |
| 128 | Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.Size 600 x 450mm x 4 mm thick |
| 129 | P & F Soap Dish or Tray of approved quality/make C.P. brass |
| 130 | making of hole in wall of required size for housing exhaust fan and same with cement plaster as required of following size more than 457mm &upto 610. |
| 131 | P & F of ventilating fans, capacitor start, single phase with impeller, ABS body, automatic openable louver shutter in existing opening including making connection, testing etc. as required 200 mm sweep. |
| 132 | P & F of IP20 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Downlight with die-cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and in compliance to IEC standards. Power Consumption of ≤ 7W/ 10W / 15W / 18W with ~ 500 / 750 / 1100 / 1250 lumens, System Lumen efficacy of 70 lm / watt output suitable to replace 1x18W / 2x18W / 2x 26W CFL Downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintaned. CCT 3000°K , 4000°K & 6000°K. Fixture shall be CE compliance.Recessed Mounting LED Downlight 9/10W minimum lumen output 1300 lm |
| 133 | P& f Star rated double ball bearing capacitor start , aluminium body &blade ceiling fan with down rod up to 30 cm with 3*1.5 sqm pvc insulated flexible copper conductor making connectin testing etc as required 1200mm sweep 3 star rated |
| 134 | Providing & Fixing of IP 20 box made out from 1.2mm thick CRCA sheet steel with depth of minimun 30 mm and finished with powder coating and suitable for mounting LED tube including side covers, holders , internal wiring to illuminate the single sided connection LED tube. ( Without tube). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .Suitable for 4' LED Tube shape fixture for single rod |
| 135 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) on surface ISI marked ( IS:14927 P - II ) virgin material UPVC trunking & it's accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal/ Surface Moulded virgin material UPVC Modular Box , 10 A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose/holder /3 way Connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Short point (up to 3 mtr.) |
| 136 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge single pole MCB 6A to 32A rating |
| 137 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge double pole MCB 6A to 32A rating |
| 138 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make on surface ISI marked ( IS:14927 P - II ) PVC casing capping & it's accessories, round tiles, Moulded PVC Modular Box with , 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required |
| 139 | short point(up to 3 m) |
| 140 | medium point( up to 6 m) |
| 141 | long point( up to 10 m) |
| 142 | Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. On board |
| 143 | UPVC SOIL WASTE & RAIN WATER (SWR ) PIPESProviding and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes.Type A 110 mm diameter |
| 144 | P&F rigid PVC pipe (IS: 4985 mark) Class-II (4Kg/cm2) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: 110mm dia |
| 145 | Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification of Wiring accessories |
| 146 | Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 75mm x 72mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge.Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) |
| 147 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on New Work |
| 148 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires.2 x 2.5 sq.mm |
| 149 | Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4, with ceiling pointing in cement sand mortar 1 : 3 complete as per specification and instruction of Engineer In Charge |
| 150 | Supply , Installation, Testing and Comissioning of Inverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/- 10% with low & high voltage cutoff and 50 hz , single phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work.1.5 TR ISEER not less then 3.8 |
| 151 | Part G - Boundary Wall |
| 152 | Demolishing brick work including stacking of servicable material and disposal of unservicable material within 50 meters lead |
| 153 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms. Lift upto 1.5 m including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavatd soil as directed within a lead of 50m all kind of soil. |
| 154 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centring and shuttering =all upto plinth level : 1:4:8( 1 cement: 4 course sand: 8 graded stone aggregate 40 mm nominal size, |
| 155 | brick masonary in foundation and plinth with bricks of class designation 75 mm in cement mortar 1:6 (1 cement : 6 coarse sand) in foundation . |
| 156 | brick masonary in foundation and plinth with bricks of class designation 75 mm in cement mortar 1:6 (1 cement : 6 coarse sand) in super structure upto 3 story . |
| 157 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish . |
| 158 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide . |
| 159 | Providing and fixing concertina coil fencing with required dia 610 mm (having 15 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. stud tied with GI staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron all complete as per direction of Engineer In Charge with reinforced barbed tape (R.B.T.)/Spring core(2.5 mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/metre (Cost of MS angle, CC block shall be paid extra) . |
| 160 | Supplying and Filling in plinth with Coarse sand under floors including watering ramming consolidating and dressing complete including cost of sand . |
| 161 | Lead for Earth, Sand, Lime, Morrum manure or sludge . |
| 162 | Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding Old work (One or more coats). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 32 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender