Tender for Tender for Construction Work Of Dizital Laibrery Near Mgm Inter Collage Nbd.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Aug 2026
2 days left
EMD
2.76 Lakhs
Bank guarantee accepted
Document Fee
27600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bijnor → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Dizital Laibrery Near Mgm Inter Collage Nbd.
BOQ
| Sl. No. | Item Description |
| 1 | EARTH WORK IN EXCAVATION |
| 2 | Earth work in excavation by mechanicla means (Hydraulic excavator) manual means over area |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. |
| 4 | Excavation, supplying and filling of lacal earth (including royalty) by mechanicla transport upto lead of 5km etc. |
| 5 | Treatment of soil under existing floors using chemical emulsion@one liter per hole, 300mm apart etc. |
| 6 | PLAIN CEMENT CONCRETE |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. 1:4:8 derived from natural sources etc. |
| 8 | 1:2:4 derived from natural sources etc. |
| 9 | Polyvinyl chloride sheet 400 micron thich |
| 10 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 11 | REINFORCED CEMENT |
| 12 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work etc. (a) Raft Footing |
| 13 | (b) colomn up to PB |
| 14 | c) Plinth beam |
| 15 | Contrete of M25 grade with minimum cement content of 330kg/cum (a) RCC work in lintel beams |
| 16 | (b) RCC work in coloum upto V floor |
| 17 | c) RCC work in slab beam |
| 18 | (d) RCC work in suspended floor slab |
| 19 | REINFORCEMENT WORKS |
| 20 | Steel reinforcement for RCC work including straightening, cutting, bending. Etc. Thermo-Mechanically Treated bars of grade FE-500D or more |
| 21 | CENTERING & SHUTTERING WORKS |
| 22 | Centering and shuttering including strutting, propping etc and removal of form for foundation, footings, bases of colomns, etc. |
| 23 | Suspended floors, roofs, landings, balconies and access platform |
| 24 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 25 | Columns, pillers,piers, abutments, posts and struts. |
| 26 | BRICKS WORKS |
| 27 | Brick work with common burnt clay F.P.S.(non modular) etc. Cement mortar 1:6 etc. |
| 28 | Brick work with common burnt clay F.P.S.(non modular) etc. Cement mortar 1:4 etc. |
| 29 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks. Cement mortar 1:3 |
| 30 | FLOORING |
| 31 | Providing and laying rectified Glazed ceramic floor tiles of size 300x300mm or more (In Floors) |
| 32 | Providing and laying vitrified floor tiles in different sizes (thichness to be specified by the manufacturer) Size of Tile 600x600mm |
| 33 | Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished etc granite stone slab colour black, cherry/Ruby red Area of slab over 0.50sqm |
| 34 | Providing edge moulding to 18mm thick marble stone counters, vanities etc. Granite work |
| 35 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre hight, etc. Red sand stone - exposed face fine dressed with rough backing 30mm thick |
| 36 | Wall lining butch work upto 10m height with Dholpur stone 40mm thick rough facing on the exosed surface etc 40mm thick |
| 37 | Providing and fixing expansion hold fasteners on C.C/R.C.C./Brick masonry surface etc. Fastener with threaded dia 6mm |
| 38 | Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry etc. 25mm thick |
| 39 | FINISHING WORK |
| 40 | 15mm cement plaster on rough side of single or half brick wall of mix: 1:4 |
| 41 | 6mm cement plaster of mix for ceilling 1:3 |
| 42 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 etc complete. |
| 43 | DOOR & WINDOWS |
| 44 | Providing and fixing double glazed hermitically sealed glazing in aluminium windows, ventilators and partition etc. Door & Windows |
| 45 | Providing wood work in frames of doors windows clerestory windows and other frames etc. second class teak wook. |
| 46 | Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) etc. 35mm thick including ISI marked stainless steel butt hinges with necessary screws. |
| 47 | Providing and fixing bright finished brass 100mm mortice latch and lock with 6 levels and a pair of lever handles etc for doors |
| 48 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised etc complete Twin rubber stopper. |
| 49 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 250x10mm |
| 50 | Providing and fixing bright finished brass 100mm mortice latch with one dead bolt and a pair of lever handles etc complete for Door |
| 51 | Providing and fixing aluminium die cast body tubular type universal gydraulic door closer etc. for door. |
| 52 | Providing and fixing double action hydraulic floors spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body/plate etc with brass cover plate minimum 1.25mm thichness. |
| 53 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron etc. |
| 54 | Providing and fixing M.S. grills of requried pattern in frames of windows etc. Fixed to opening/wooden frames with rawl plugs screws |
| 55 | PAINTING WORK |
| 56 | Finishing walls with 100% premium acrylic emulsion paint having VOC less than 50gm/liter etc.New work (Two or more coats [email protected] liter/10sqm. Over and including priming coat of exteriror primer applied @ 0.90 liter/10sqm. |
| 57 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specification: on walls |
| 58 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: 13.61.1 Two or more coats on new work. |
| 59 | French spitit Polishing: Two or more coats on new works including a coat of wood filler. |
| 60 | TERRACE & WATER PROOFING WORK |
| 61 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 on wall at FFL |
| 62 | Providing and laying integral cement based water proofing treatment including preparation of surface as required. Etc. Wall and Slabs |
| 63 | Supplying and applying bituminous solution primer on roof and/or wall surface at 0.24 litre per sqm. On Roof |
| 64 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc. |
| 65 | MISCELLANEOUS WORKS |
| 66 | Making plinth protection 50mm thick of cement concrete 1:3:6 Around of Building |
| 67 | Providing gola 75x75mm in cement concrete 1:2:4 in 75x75mm deep chase. |
| 68 | Making khurras 45x45cm with average minimum thichness of 5cm cement concrete 1:2:4 |
| 69 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced etc. |
| 70 | 12.5mm thick tapered edge gypsum plain board conforming to IS:2095- (Part I):2011 (Board with BIS certification marrks) For Ceiling. |
| 71 | Providing and fixing 12mm thick toughened glass partitions complete including all supports, for Door. |
| 72 | Making fabrication and placing in position MS Gates steel work in built up tubular(round, square or rectangular hollow tubes etc.) |
| 73 | Providing and fixing stainless steel (Grade 304) railling made of Hollow tubes, channels, plates etc. 1st floor |
| 74 | Provding fixing stone pedestal railling for staircase including fining all complete of work. Steps pedestal |
| 75 | Making of Front elevation moulding designing grooving pillar design including scaffolding all complete of work. Designing. |
| 76 | SANITARY FIXTURES AND ACCESSORIES |
| 77 | Providing and fixing water closet squatting pan (Indian type W.C. Pan). White Vetreous china Orissa pattern W.C. Pan of size 580x440mm with integral type foot rests. |
| 78 | Providing and fixing white vitreous china pedestal type water closet (European Type) with seat and lid etc. W.C. pan with ISI marked white solid plastic seat and lid. |
| 79 | Providing and fixing one piece consturction white vitreous china squatting plate with and integral longitudinal flushing pipe etc. |
| 80 | Prividing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC. |
| 81 | Providing and fixing wash basin with C.I. brackets. 15mm dia CP brass single hole basin etc. |
| 82 | Prividing and fixing white vitreous china laboratory sink with C.I. brackets etc. size 600x450x200mm |
| 83 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded etc rectangular shape 1500x450mm |
| 84 | Providing and fixing CP Brass 32mm size bottle Trap of approved quality & make for basim & urinals |
| 85 | Prviding and fixing toilet paper holder C.P. Brass |
| 86 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall |
| 87 | 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighting not less than 190 gms. |
| 88 | WATER SUPPLY PIPES AND FITTING |
| 89 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipe having thermanl stability for hot & cold water supply. (Internal Work) 15mm nominal dia pipes |
| 90 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipe having thermanl stability for hot & cold water supply. (Internal Work) 20mm nominal dia pipes |
| 91 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipe having thermanl stability for hot & cold water supply. (Internal Work) 25mm nominal dia pipes |
| 92 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipe having thermanl stability for hot & cold water supply. (Internal Work) 32mm nominal dia pipes |
| 93 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipe having thermanl stability for hot & cold water supply. (External Work) 15mm nominal dia pipes |
| 94 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipe having thermanl stability for hot & cold water supply. (External Work) 20mm nominal dia pipes |
| 95 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipe having thermanl stability for hot & cold water supply. (External Work) 25mm nominal dia pipes |
| 96 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipe having thermanl stability for hot & cold water supply. (External Work) 32mm nominal dia pipes |
| 97 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipe having thermanl stability for hot & cold water supply. (External Work) 40mm nominal dia pipes |
| 98 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipe having thermanl stability for hot & cold water supply. (External Work) 50mm nominal dia pipes |
| 99 | Providing and fixing gun metal gate velve with C.I. wheel of approved quality (Screewed end) : (Make:JOLOTO) 25mm nominal bore |
| 100 | Providing and fixing gun metal gate velve with C.I. wheel of approved quality (Screewed end) : (Make:JOLOTO) 32mm nominal bore |
| 101 | Providing and fixing gun metal gate velve with C.I. wheel of approved quality (Screewed end) : (Make:JOLOTO) 40mm nominal bore |
| 102 | Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15mm niminal bore |
| 103 | Providing and fixing C.P. brass long nose bib cock of approved qulity conforming to IS standards and weighing not less than 810gms. 15mm nominal bore |
| 104 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm minonal bore |
| 105 | Providng and fixing unplasticised PVC connection pipe with PTMT Nuts, collar and bush of approved quality and colour 15mm nominal bore with 45cm length |
| 106 | EFFLUENT & RAIN WATER PIPES AND FITTINGS |
| 107 | Providng and placing on terrace (at all floor levels) polyethylene water storage tank, IS:12701 marked on Terrace |
| 108 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (100mm diameter pipe) |
| 109 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (200mm diameter pipe) |
| 110 | Providing and laying cement concrete 1:5:10 (100mm diameter S.W. pipe) |
| 111 | Providing and laying cement concrete 1:5:10 (200mm diameter S.W. pipe) |
| 112 | Construction masonary chamber 60x60x75cm, inside in brick work in cement mortar 1:4 with common burnt clay F.P.S. |
| 113 | Providing and fixing square-mouth S.W. gully wap class OP complete with C.I. grating brick masonry chamber with water tight C.I. cover |
| 114 | Making soak pit 2.5m diameter 3.0meter deep with 45x45cm dry brick honey comb shaft with bricks and S.W. drain pipe 100mm diameter, 1.8m long complete as per standard design. |
| 115 | Supply/Installation work of Electronics set for Digital Library |
| 116 | 225 mm dia PVC pipe 10 kg/pressure cm2 as per ISI mark |
| 117 | 225 mm dia PVC slotted pipe 10 kg/pressure cm2 as per ISI mark |
| 118 | 226 mm dia PVC slotted pipe 10 kg/pressure cm2 as per ISI mark |
| 119 | 227 mm dia PVC slotted pipe 10 kg/pressure cm2 as per ISI mark |
| 120 | 228 mm dia PVC slotted pipe 10 kg/pressure cm2 as per ISI mark |
| 121 | 229 mm dia PVC slotted pipe 10 kg/pressure cm2 as per ISI mark |
| 122 | Furniture Work For Digital Library |
| 123 | Providing and fixing Filing Cabinet/Almirah with door and pallar |
| 124 | Providing and fixing Office tabe having size of 5'x3'x2.5' |
| 125 | Providing and fixing Visitor Chairs for branded as gogrej, sterling Ezeey, Metro etc. |
| 126 | Providing and fixing Computer table in laminated board having sliding etc. |
| 127 | Providing and fixing Reception table in D-Shape having size atleast 6'x2.5'x2.5' |
| 128 | Prviding and fixing 3 seater joint chair in ss/crome in perforated jaali with arm rest on sides etc. |
| 129 | Consultancy, Vetting other government allied works as per requirement (Lum sum) |
| 130 | Electicity (3% of Civel cost) |
| 131 | Add GST@18% |
| 132 | Say Amount Please Enable Macros to View BoQ information Compatibility Report for BOQ_Library.xls Run on 7/25/2026 11:48 The following features in this workbook are not supported by earlier versions of Excel. These features may be lost or degraded when opening this workbook in an earlier version of Excel or if you save this workbook in an earlier file format. Significant loss of functionality # of occurrences Version One or more cells in this workbook contain data validation rules which refer to values on other worksheets. These data validation rules will not be saved. 3.0 Excel 97-2003 Minor loss of fidelity Some formulas in this workbook are linked to other workbooks that are closed. When these formulas are recalculated in earlier versions of Excel without opening the linked workbooks, characters beyond the 255-character limit cannot be returned. 5Defined Names Excel 97-2003 Some cells or styles in this workbook contain formatting that is not supported by the selected file format. These formats will be converted to the closest format available. 4.0 Excel 97-2003 |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender