Tender For special Repair Of Bldg No Ch-54 (Jco Mess And Jcos Cook House), Bldg No T-194 (Offr Living) And Bldg No T-180 (Offr Mess Ck House) At Fd Hosp Of Age B/R And Age E/M Under Ge Tenga
Tender Value
36 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
3 days left
EMD
72000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kameng → Arunachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg No Ch-54 (Jco Mess And Jcos Cook House), Bldg No T-194 (Offr Living) And Bldg No T-180 (Offr Mess Ck House) At Fd Hosp Of Age B/R And Age E/M Under Ge Tenga
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Aug-2026 | BOQ CORRIGENDUM | BOQ | 20-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises. |
| 2 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggragate as in subbase 25 mm thick complete all specified and directed by engr in charge. |
| 3 | M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, lite shade area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:4 complete all as specified and directed |
| 4 | M&L Virified Ceramic dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 5 | M&L for screed bed or bedding layer of 15mm thick in cement mortar 1:4 for laying floor tiles etc all as specified. |
| 6 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed |
| 7 | Material and labour for 350x 250x7mm or 450x350x7mm thick glazed ceramic tiles coloured set and jointed in neat cement slurry and pointed in coloured cement over and including 10mm thick rendering with CM 1:3 on fair faces of brick work or concrete surfaces as in dado of bathroom, toilet and kitchen all as specified. |
| 8 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by engr in charge |
| 9 | Use and waste of flat Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves, cooking platforms including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 10 | M&L for machine cut kota stone slab as in flooring 20 to25 mm thick in floor including screed bed 15mm thick or bedding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and jointed with greay cement slurry mixed pigment to match shade of slab incl rubbing and polishing complete all as specified . |
| 11 | M&L TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips quality complete all as specified and directed |
| 12 | M&L for RCC Nominal Mix Type B-1, 1:2:4, (using 20mm graded stone agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 13 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) in 40mm complete all as specifird and directed. |
| 14 | M&L for 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and directed |
| 15 | S&F in repair 15mm bore bib tap, chromium plated brass , fancy type with capstan head screwed down, screwed for iron pipe all as specified and directed. |
| 16 | S&F Waste fittings 32 mm, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed for WHB |
| 17 | S&F in repair 15mm dia angle valve/stop valve chromium plated cast copper alloy fancy type screwed down high pressure with capstan head screwed both endsfor iron pipe or for union complete. |
| 18 | S&F in repairs fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore. |
| 19 | S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) |
| 20 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 21 | S & F PVC connecting pipe 15mm size with PTMT nuts of length 600 mm long |
| 22 | S&F in repair vitreous china wash hand basin white of size 550 x 400 mm flat back excluding taps, waste, chain and plug but including brackets including cutting for and pinning in ends of brackets or erecting complete all as specified and directed |
| 23 | S&F kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed. |
| 24 | Taking up or down 15 mm bore steel tubing and connections. |
| 25 | Taking up or down 20 mm bore steel tubing and connections. |
| 26 | S&F of 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 27 | S&F of 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 28 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (without taking off shutters from the frame). |
| 29 | Taking down Chowkats or frames exceeding 1.5 Sqm each but not exdeeding 4 Sqm each(without taking off shutters from the frame). |
| 30 | Supply and fix 2nd class hard wood plain solid straight chowkats and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 31 | S& F for 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed |
| 32 | S&F 2nd class hard wood 30mm thick Glazed and skeleton shutters, divided into squared, with plain, chamfered or roun0ded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR 2009 Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed |
| 33 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 34 | S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane |
| 35 | Supply & fix sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 36 | Supply and fix 100mm long MS butt hinge medium weight cold rolled in panelled doors and flush doors |
| 37 | Supply and fix MS butt hinges medium weight, cold rolled 125mm size complete all as specified and directed. |
| 38 | Supply and fix 75mm long MS butt hinge medium weight cold rolled in PVC Doors |
| 39 | Supply and fix aluminium anodized barrel tower bolt 150mm long extruded section |
| 40 | Supply and fix aluminium anodized barrel tower bolt 125mm long extruded section. |
| 41 | Supply & fix Extruded Aluminium anodised alloy handles fabricated type 150mm long complete all as specified and directed. |
| 42 | Supply & fix Extruded Aluminium anodised alloy handles fabricated type 125mm long complete all as specified and directed. |
| 43 | Supply & fix Extruded Aluminium anodised alloy handles fabricated type 100mm long complete all as specified and directed. |
| 44 | Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed |
| 45 | Supply & fix aluminium alloy, anodised, sliding door bolts 250mm size with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed. |
| 46 | S&F Mild steel flat iron as in hold fasts, clamps,wall ties,bands,straps supports or stay for rain water etc. |
| 47 | S&F MS window guard bars, window frames etc articles confirming to Fe 290-0 or E-165. |
| 48 | M&L for preparation of new wooden surface of plywood and wood based material of any description not otherwise describred over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 49 | M&L for preparation of old wooden surface of plywood and wood based material of any description not otherwise describred over 10 cm width or girth and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 50 | Dismantling of wall and ceiling boards of any description including cover fillets complete all as specified and directed |
| 51 | M & L for providing 4mm thick \\"E\\" Board in ceiling with galvanised iron snap frame of 'T' section 24 x 38 x 0.70 mm wall/ceiling angle 25x25x0.35mm thick and hanging with 4mm GI wire all fixed arrangement will be done as per manufacturer instruction incl two coat of oil bound distemper anirected.d one coat of white wash complete all as specified and directed by engr in charge. |
| 52 | S&F 4 mm thick plywood, graded BWR type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as speceified and directed |
| 53 | Supply and fixed 6 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed. |
| 54 | M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section wrought, secured with nails having sectional area exc 3 sqcm and not exc 6 sqcm complete all as specified and directed |
| 55 | Dismantling Timber scantling 40 sq cm and over in section , in any position all as specified and directed. |
| 56 | M& L for cleansawn Second class hard-wood scantlings with framed work.complete all specified and directed |
| 57 | Taking down cement plaster on brick, concrete block wall or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. |
| 58 | M&L Rendering 10 mm thick on fair faces of brick work or concrete surface in cement plaster 1:6, finished even and smooth with out using extra cement complete all as specified and directed |
| 59 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 with WPC 3% by weight of cement finished even and smooth without using extra cement completed all as specified and directed |
| 60 | Supply only integral water proofing compound all as specified and as directed. |
| 61 | M&L for Rendering 20 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finished even and smooth with neeru finish using extra cement |
| 62 | M&L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper,over a coat of primer complete all as specified |
| 63 | M&L for preparation of Newly plastered surfaces of walls and applying two coats of oil bound distemper,over a coat of primer complete all as specified |
| 64 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on walls and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces completed all as specified and directed |
| 65 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 66 | S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 67 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 68 | M&L for 75 mm thick thick plain cement concrete type C-2 1:3:6 (40 mm graded stone aggregate) as in plinth protection, finishing the top surface even and smooth w/o using extra cement |
| 69 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 70 | M&F for providing PCC Type B1 1:2:4 using 20mm stone aggregate, cement concrete as roof kerbs,plinth wall or mud stops rounded or chamfered on edges as in coping complete all as specified and directed |
| 71 | Demolition of precast block walling built in cement mortor complete all specified and directed |
| 72 | M&L PCC 1:3:6 type C1 as in block masonry with solid blocks exc 10 cm in width and set in CM 1:6. complete all specified and directed. |
| 73 | M&L rendering 15mm thick in CM 1:4 on concrete outer surfaces finished even and smooth without using extra cement . complete all specified and directed |
| 74 | Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed |
| 75 | Supply and fix, 0.63 mm thick corrugated galvanised mild steel sheeting (minimum 275gm/sqm galvanising) with two corrugations side lap, fixed with L type or J type or cranked hooks , bolts and washer in roof, complete, all as specified and directed. |
| 76 | Supply and fix plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing of 0.80mm thickness (minimum 275gm/sqm galvanising) complete all as specified and directed. |
| 77 | M&L for preparing and applying two coat of synthetic enamel over a priming coat on new zinc (or galvanised ) surfaces to receive painting, by coating with mordant solution including washing and cleaning etc. of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed. |
| 78 | Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 79 | Demolition of cement Concrete(Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all specified and directed by engr in charge |
| 80 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggragate as in subbase 40 mm thick complete all specified and directed by engr in charge. |
| 81 | Material and labour for providing cement concrete 1:4:8 type D2 75 mm thick (using 40mm graded aggregate ) as in sub base all as specified. |
| 82 | M&L for Preparing surfaces plastered or unplastered newly surfaces with two coats of cement base paint over one coat of white wash as complate all specified and directed |
| 83 | Dismantling water tank any type and any position from site of capacity 500 litres. |
| 84 | S&F 500 Ltr Rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position all as specified |
| 85 | S&F PVC ball valve 20mm dia high pressure of PTMT with aluminium rod & high density plastic ball screwed for iron pipe all as specified |
| 86 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 87 | S & F in repair Vitreous China Wash Down Water Closet Pan (Pedestal Pattern, white) excluding Fixing Boards, Flushing Cistern and Flush pipe all as specified and directed. |
| 88 | S & F in repairs EWC seat Cover for Pedestral pan all as specified and directed. |
| 89 | S & F in repair 10 ltrs capacity PVC valveless syphonic action type Dual flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete. |
| 90 | S&F PVC connection 15mm size with PTMT nuts, of 450mm length all as specified and directed. |
| 91 | S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl Jointing with solvent cement. |
| 92 | S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or floors. complete all specified and directed |
| 93 | M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm bore pipe complete all as specified and directed |
| 94 | S&F PVC (SWR) bends any radius with access door, 110mm dia.complate all specified and directed |
| 95 | S&F PVC (SWR) bends any radius with access door, 75mm dia. complate all specified and directed |
| 96 | S&F PVC (SWR) junction single, (Single T) equal or unequal of dia110mm. complate all specified and directed |
| 97 | S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches or floors.complate all specified and directed |
| 98 | M&L for in replacement of Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC pipe of adequate size with all fittings and accessories) including PVC insulated and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 99 | All as per item No. 98 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size |
| 100 | All as per item No. 98 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed. |
| 101 | M&L for in replacement of Point wiring with 2.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC pipe of adequate size with all fittings and accessories) including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 2.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 102 | S&F Socket outlet 2 in 1, 3 pin, 5 amp flush type |
| 103 | S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type |
| 104 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed. |
| 105 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. |
| 106 | Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. |
| 107 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. complete all as directed. |
| 108 | Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed. |
| 109 | S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed. |
| 110 | S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 111 | S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed. |
| 112 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers |
| 113 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm |
| 114 | Supply and fix electric water heater(Geyser), storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 star rated adjustable temprature setting 0-90 degree C complete with accessories such as safety wall, thermostate, NRV indication lamps, inlet outlet connections,air vent connections, connection pieces including all fixing arrangements such as fastners, bilts, nuts washers etc including making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge |
| 115 | S&F Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of size 15 mm. |
| 116 | S&F Bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified & as directed by engr-in-charge. |
| 117 | S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 6 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 6 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run.) |
| 118 | S&F distribution board vertical type TPN 415 Volt for fixing 4 pole MCCB, double door IP 43 protection, 4 way with copper bus bars, neutral links , earth link, earthing studs, blanking plates, interconnection between incomer MCCB and bus bar duly prewired fixed flush to wall / other surface complete all as specified and as directed. |
| 119 | S & F MCCB, 04 Pole, capacity 100 Amps with ultimate breaking capacity 16 KA at 415 volts with fixed thermalsettings conforming to IEC 60947 Part-I/IS-13947 Part-I , (Ics=Icu=100%) in the existing panel with suitable connecting copper terminals at site complete all specified and directed. |
| 120 | Supply and fix sheet metal enclosures for DBs Double Door when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 121 | Supply and fix sheet metal enclosures for DBs Double Door when MCBs to be used 415 volts 4 way 200 Amp rated busbar Triple pole and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 122 | S&F MCB TPN having braking capacity 10KA, 63/100 Amps, 240 V complete all as specified and directed. |
| 123 | S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 V complete all as specified and directed. |
| 124 | S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed. |
| 125 | Supply & install Electrical Chimney for Cook House of size min 90 cm with 1600 CFM Air suction flow, Metal oil collector, filterless technology and BLDC Motor with minimum 3 mtr exhaust duct pipe complete all as specified and directed. |
| 126 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
| 127 | Supplying, laying, jointing & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, of size 25 sqmm 4 core as per IS 7098 Pt-II laid in trenches / ducts / encased in GI pipe / fixed to pole complete all as directed and specified. |
| 128 | Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out complete all as specified and as directed. |
| 129 | Returning filling in any type of soil including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed. |
| 130 | Removing excavated soils to a distance n.exc. 50 mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed. |
| 131 | M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particals in trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shall be measured 18 cm after punning. |
| 132 | Supplying and laying un-reinforced precast concerete cable cover, class LV, type 1 flat size 250mm x150mm x 40mm for cable protection all as specified and directed |
| 133 | Supply and laying galvanised tube light grade ISI marked of size 40 mm dia incl all fittings in trenches/fixed on pole/wall/floor or laid in position including repairing of demolished cemented portion complete all as specified and directed. |
| 134 | Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc) |
| 135 | Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC. |
| 136 | S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 4 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 4 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 4 sqmm earth wire and 2 Run of 4 sqmm cable shall be measured as one run.) |
| 137 | S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20A complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 20, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender