Tender For Repair To Wall Cladding, Ceiling, Sanitary Fitting And Certain Connected Items At Office Area Of Cda Guwahati And Lao Conplex And Welcome Maintenance Of Officers Accn And Certain Other Maintenance Works At Cda Guwahati Under Ge Guwahati
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Aug 2026
19 days left
EMD
83000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Wall Cladding, Ceiling, Sanitary Fitting And Certain Connected Items At Office Area Of Cda Guwahati And Lao Conplex And Welcome Maintenance Of Officers Accn And Certain Other Maintenance Works At Cda Guwahati Under Ge Guwahati
BOQ
| Sl. No. | Item Description |
| 1 | Demolition cement concrete n'exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Taking down chowkhats incl shutterrs (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each complete all as specified and as directed. |
| 3 | Dismantling floor, hearth or all tiling including cement mortar bedding (but not backing coat), removing serviceable tiles to store and rubbish off the premesises complete all as specified and as directed. |
| 4 | Demolition of brick work built in cement mortar including all quions, arches pillars etc. complete all as specified and as directed. |
| 5 | M&L for brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed |
| 6 | M&L for brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 complete all as specified and as directed. |
| 7 | M&L for 10mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement complete all as specified and as directed. |
| 8 | M&L for applying two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs (unndiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat over 1 mm thick wallcare putty for making the surface uniform complete all as specified and as directed. |
| 9 | M&L for 15 mm thick screed bed or bedding layer of mortar in CM 1:6 fixing of tiles in floor complete all as specified and as directed. |
| 10 | M&L for 10 mm thick rendering in CM 1:4 on brick or concrete surfaces for fixing of tiles in wall complete all as specified and as directed. |
| 11 | S&F Virified Ceramic tiles light coloured shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 12 | S&F Virified Ceramic tiles light coloured shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in vertical walls. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 13 | S&F non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 600mmx600 mm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 14 | M&L for Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window- cills, cooking platforms andincluding and over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 15 | S&F colour Glazed ceramic coloured tiles 300X600 mm of 7 to 8mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 16 | S&F in repairs of viterious china wash down water couple closet size 760x360x635 mm tap distance S-220 mm including making good to floor including seat cover complete all as specified and as directed. |
| 17 | S&F in repairs 15mm bore basin mixer fancy type castcopper alloy with capstin head CP screwed down high pressure with or without littered 'H' or 'C' with long screwed shank and fly nuts screwed for iron pipe etc complete all as specified and as directed. |
| 18 | S&F in repairs connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed |
| 19 | S&F in repairs 15mm bore fancy type chromium plated two way bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and as directed. |
| 20 | S&F in repairs 15 mm bore stop valve cast copper alloy, screwed down, high pressure, with crutel or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 21 | S&F in repairs 32 mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed. |
| 22 | S&F in repairs counter top vitreous china wall hung wash basin white, size 550x400x200 mm excluding taps, waste, but including barkets with pedestal with fixing accessories complete all specified and as directed. |
| 23 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 24 | S&F in repairs corner glass shelves with border to hold the bathing kit minimum width 150 mm and fixed in position complete all as specified and as directed. |
| 25 | S&F in repair fancy type curtain/hanger rods of mild steel pre painted with fixing decorative bracket stops rollers etc complete all as specified and directed. |
| 26 | S&F in repair health faucet with 1.00 mtr long flexible tube and hook ABS body chromium plated 8mm dia complete all as specified and directed. |
| 27 | S&F in repairs GI water tubes medium grade with all necessary fitting all as reqd complete of 15mm dia and fixed in walls/floor etc complete all as specified and as directed. |
| 28 | S&F in repairs tubes medium grade GI with all fittings fixed complete to walls and ceiling or laid in floors 20mm bore complete all as specified and as directed. |
| 29 | S&F in repair Tubelar towel rack 20 mm dia with stainless steel Grade 304 of size iniu 600x204x220 mm of weight not less than 1.4 kg complete all as specified and as directed. |
| 30 | S&F in repairs bevelled edge mirror of selected quality glass, with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 31 | S&F in repairs woven vinyl flooring of thickness not below 2 mm having Anti slip property more than 0.3, reaction to fire Bfl-s1 with sound absorbent quality alogwith stain, oil & water resistance installed using high end adhesives/epoxy complete all as specified and directed. |
| 32 | M&L for 40 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) using 20mm graded aggregate as in sub base/base of floor complete all as specified and as directed. |
| 33 | S&F in repairs premium charcoal/PVC based fluted louver wall cladding of thickness 10-12 mm having thermal insulation, sound absorbtion and moisture resistance alogwith necessary matching edge bands, L profiles, or end caps to ensure neat, finished edge inclusive of all nails, adhesives and hardwares complete all as specified and directed |
| 34 | S&F Gl frame work for seamless ceiling comprising of Gl erimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including taking down old false ceiling complete all as specified and as directed. |
| 35 | M&L for 8mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and as directed. |
| 36 | M&L for two coats of smooth interior acrylic emulsion on ceiling with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs(unndiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat over 1 mm thick wallcare putty for making the surface uniform complete all as directed |
| 37 | M&L for complete removal of existing treatment and applying two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs(unndiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat over 1 mm thick wallcare putty for making the surface uniform complete all as directed |
| 38 | M&L for decorative cornices/moulding using POP of cross sectional dimesions exc 25 sqcm and n exc 50 sqm as per pattern and design as approved an fixed in position including preparation of surfaces and applying two coats of plastic emulsion paint over acoat of primer complete all as specified and as directed. |
| 39 | S&F in repairs factory made modular wardrobe with 18 mm thick both side balancing lamination factory made HDHMR for boxes, shelves, racks, almirah, cupboard and drawer etc including necessary nails, screws etc complete all as per specified and directed |
| 40 | S&F door catcher/door magnet for Door of size 50 mmx25 mm and 50 mmx15 mm with ABS body and stainless steel catcher, fixed with screws complete all as specified and as directed. |
| 41 | M&L for Providing and fixing 12mm thick frameless toughened glass door shutter of providing and fixing hydraulic floor door closer (Dorma or equivalent) including top & bottom pivot and making necessary holes and all hardware, decorative handle and patch lock etc. alongwith floor lock for door complete, and fixing frosted film fixed with Logo as desired including taking down old complete all as specified and directed |
| 42 | M&L for Providing and fixing factory made uPVC of desired colour Sliding window Three track of area exceeding not exc 2 sqm made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 43 | S&F 4 mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane glazing with oil putty complete all as specified and as directed. |
| 44 | S&F galvanized mild wire cloth 0.36 nominal dia wire and average width aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 45 | S&F 150mm long aluminium handle, cast type, anodised complete all as specified and as directed. |
| 46 | S&F 200 mm aluminium anodised barrel tower bolt, of extruded section and fixed in position complete all as specified and as directed. |
| 47 | S&F 125 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and as directed. |
| 48 | S&F fancy type venetian Blinds for windows of 1 inch slates and frames made up of aluminium, including blind shade, pulling cord, brackets and necessary screws and fishers alongwith fixing in position complete all as specified and directed. |
| 49 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) ® complete all as specified and as directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 50 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 51 | M&L for preparing old decorated plastered surfaces of WALL and applying one coat of white complete all as specified and as directed. |
| 52 | M&L for preparing old decorated plastered surfaces of CEILING and applying one coat of white complete all as specified and as directed. |
| 53 | M&L for preparation of old surfaces, scrapping down moulds, moss and efflorescent salt and trading oil and greasy spots and washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of Oil bound distemper complete all as specified and as directed. |
| 54 | M&L for complete removal of existing treatment on wall and apply two coat of oil bound distemper and including 1 mm thick wall care putty complete all as specified and as directed. |
| 55 | M&L for preparation of old wooden sufaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint of wooden surfaces complete all as specified and as directed |
| 56 | M&L for preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 57 | M&L for preparation of old painted surface applying a coat of synthetic enamel paint on steel and iron surfaces over 10cm width or grith complete all specified and as directed. |
| 58 | S&F in repairs padestal type bowl with cistern coupled WC (one piece) with UF Soft Close slim Seat cover, hinges, dual flush cistern fitting and fixing aaccessories incl P trap-180 mm complete all specified and as directed. |
| 59 | S&F in repair 15mm dia Basin Mixer cast copper alloy, swan neck type chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks complete all specified and as directed. |
| 60 | S&F in repair 15mm dia bib tap swan neck cast copper alloy, swan neck type chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks complete all specified and as directed. |
| 61 | S&F in repair plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 62 | S&F in repairs waste pipe 32/40mm dia complete all as specified and directed |
| 63 | S&F PVC Cabinet looking mirror with inner selves for holding bath/saving kit of size 300 x 450mm complete all as specified and directed. |
| 64 | S&F in repairs 15 mm dia Bib tap fancy type with chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 65 | S&F as in repairs cast copper alloy, chromium plated, fancy type, 15 mm bore angular stop valve with wall flange, screwed down, high pressure with crutch handle, screwed both ends for iron pipe or for union complete all as specified and directed. |
| 66 | S&F in repair GI wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete all as specified and directed. |
| 67 | S&F in repair PVC flushing cistern 10 ltr capacity low level including flush pipe with inlet ball valve float and braket and 32 mm bore PVC flush pipe complete all as specified and directed. |
| 68 | S&F in repair toilet paper holder Stainless steel with brass screws and wooden / plastic cleats of white in colour of box type complete all as specified and directed. |
| 69 | S&F in repair chromium plated shower rose 125mm size with or without swivel joint including fixing to steel pipe or union complete all as specified and directed. |
| 70 | S&F in repairs towel rail 600mm long of PTMT fixed with and incl chromium plated brass and wooden plastic bats complete all as specified and directed. |
| 71 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and directed. |
| 72 | S&F 3mm thick Figured glass, pinhead type in squares n exc 0.5 sq.m each pane etc complete all as specified and directed. |
| 73 | S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty insquare n exc 0.5 sq. m in each pane etc complete all as specified and directed. |
| 74 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 75 | S&F in repair vitreous china EWC wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including PVC sheet cover complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender