Tender For Supply Of T & P Items I.E. Hedge Trimmer, Brush Cutter & Pole Pruner For Ward No. 88/Kbz
Tender Value
1.95 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
5 days left
EMD
4000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Of T & P Items I.E. Hedge Trimmer, Brush Cutter & Pole Pruner For Ward No. 88/Kbz
BOQ
| Sl. No. | Item Description |
| 1 | Hedge Trimmer• Engine: 2 Stroke, Single Cylinder, Air Cooled• Engine Displacement: Should be between 20–25 CC• Power Output: Should be minimum 1 HP• Fuel Tank Capacity: Minimum 400 ml• Weight: Should not be more than 6.0 KG• Clutch: Clutch lining should be metal only• Handle: Must have rotating multi-function handle• Anti Vibration System: Must have spring loaded technology for Anti Vibration System• Design: Should have double sided blade with tooth spacing minimum 35 mm• Bar Length: Minimum 600 mm• Blade: Should have chrome plated anti-corrosion coating• Stroke Rate (/min): Minimum 3000• Vibration Level m/s² at Right Handle: Should not be more than 3.5 m/s²• Sound Pressure Level [dB(A)]: Should not be more than 95• Certification: Should have TUV with EN ISO 10517:2009 |
| 2 | Brush Cutter• Engine: Single Cylinder, 2 Stroke, Aircooled only• Engine Displacement: 40.2 CC• Power Output: 2 kW / 2.7 HP• Max Output Shaft Speed at Cutting Attachment: Should be minimum 9000 RPM• Carburetor: Diaphragm with compensator technology• Fuel Tank Capacity: Minimum 600 ml• Weight (Dry, without cutting attachment & deflector): Should not be more than 7.5 Kg• Clutch: Centrifugal Type, clutch shoe support base & lining metal only• Multi Function Handle: Should have acceleration, ON/OFF switch at right handle• Brushcutter Harness: Should be double shoulder harness only• Anti Vibration System: Must have 4-point anti vibration system• Vibration Level in m/s² at right handle: Should not be more than 2.5 m/s²• Sound Pressure Level dB(A): Should not be more than 105 dB(A)• Drive Shaft Design |
| 3 | Petrol Operated Pole Prunner• Engine: Single Cylinder, 2 Stroke, Air Cooled Only• Displacement: Should be between 25–30 CC• Power Output: Should be minimum 1.2 HP• Weight (Dry without cutting attachment & fuel): Should not be more than 7.5 Kg• Fuel Tank Capacity (ml): Should be minimum 400 ml• Chain Oil Capacity (ml): Must have minimum 200 ml• Clutch: Clutch shoe lining should be metal only• Guide Bar Length: Minimum 30 cm• Guide Bar and Chain: Should have same manufacture only• Chain Type: Every drive link need groove & small oil holes for better lubrication. Saw chain pitch should be 1/4\\" or 3/8 pico only and drive link thickness must have 1.1 mm or 1.3 mm• Max Output Shaft Speed (RPM): Should be minimum 8000 RPM at chain sprocket• Equipment Total Length with Guide Bar and Chain (cm): Should be minimum 270 cm compressed & total length of equipment minimum 350 cm extended• Sound Pressure Level [dB(A)]: Should not be more than 95 dB(A)• Vibration Measurement m/s² at Control Handle (Extended Position): Should not be more than 3.5 m/s²• Certification: Must have TUV certification with test standard EN ISO 11680 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender