Tender For Deposit-Karavally Puthuval - 1No. Shutter Replacement: 1.45 M (W) X 1.70 M (H)-Fabrication, Erection And Painting Of The Ms Shutters With Embedded Parts And Hoisting Mechanism, Devikulangara Grama Panchayat, Alappuzha District-General Mech
Tender Value
2.74 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
10 days left
EMD
6869
Bank guarantee accepted
Document Fee
610
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alappuzha → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deposit-Karavally Puthuval - 1No. Shutter Replacement: 1.45 M (W) X 1.70 M (H)-Fabrication, Erection And Painting Of The Ms Shutters With Embedded Parts And Hoisting Mechanism, Devikulangara Grama Panchayat, Alappuzha District-General Mechanical Work
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Sep-2026 | DEPOSIT Karavally Puthuval 1No. Shutter Replacement 1.45 m W x 1.70 m H Fabrication Erection and Painting of the MS Shutters with Embedded Parts and Hoisting Mechanism Devikulangara Grama Panchayat | Date | 25-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing ring bund,dewatering ,Centering shuttering and concreting |
| 2 | OD29594/2025-2026:Dismantling of the Canal Shutter (Upto 2 Tonne weight )/ Hoisting unit/ Embedded parts etc of the same and stacking at the location as directed by the departmental officer at site, including hire of machinery , labour etc .complete (weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80 %) Rate analysis of 10 Qtl |
| 3 | OD25092/2023-2024:60.1.1 RING BUND Type-I-Putting up ring bund as per approved shape 2.5m bottom width, 1m topwidth using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart andfilled in between with puddle clay to form bund for an average height 2.00m including labourdismantling the bund after completion of the work, etc. complete |
| 4 | OD25093/2023-2024:60.2.3 Bailing out water using pump above 5 HP and Up to 10 HP-Bailing out water withengine and pump set above 5HP and up to 10HP, including conveyance to site and erection,cost of fuel, lubrication oil, and other stores pay of staff, etc complete |
| 5 | 15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. |
| 6 | 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts |
| 7 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 8 | 4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Supply, fabrication and erection of embedded parts, shutter and hoisting |
| 10 | OD25083/2023-2024:Supply of MS round bar including cost of conveyance charges |
| 11 | OD25084/2023-2024:Clearing grass from banks of channel and removal of silt, zoological waste & debrisfrom canal bed, removal of the rubbish up to a distance of 50 m outside the periphery of thearea cleared including conveyance charges |
| 12 | OD25085/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges |
| 13 | OD25086/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges |
| 14 | OD25088/2023-2024:Fabrication and erection of Embedded Parts for canal shutters(Up To 2 Tonne<br>Weight) and accessories as per approved specifications, drawing and direction of deptl. officer at site<br>including cost of labour, machinery all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied. |
| 15 | OD25089/2023-2024:Fabrication, Supply, erection and assembling in correct position and alignment bywelding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc asper approvedspecifications, drawings and directions of deptl officer at site including cost of allmaterials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift,conveyance, incidentaland handling etc complete |
| 16 | OD25090/2023-2024:Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge /Platfurm and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied |
| 17 | 85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 18 | 85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 19 | OD25091/2023-2024:Erection of the canal shutter (Up to 2 Tonne weight) /Hoist Bridge /Platform including hand rails . ladder etc for the same including, alignment correcting and setting complete including cost of all labour, machinery , incidental and conveyance, lead and lift charges etc complete but excluding cost of material already supplied. |
| 20 | Provision for Rubber seals |
| 21 | 85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing |
| 22 | 85.117:Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings |
| 23 | Operating mechanism |
| 24 | OD25096/2023-2024:supply of bolt and nut up to 300 mm length including cost of conveyanceData for 1 quinta |
| 25 | OD25097/2023-2024:Supplying and applying Grease on Screw Rod |
| 26 | OD4919/2025-2026:Providing of worm and pinion having a lifting speed of around 5.00cm/min for hand operation including cost of all materials, labor, hire charges and conveyance. |
| 27 | OD5321/2025-2026:Providing EN-8 screw rod 7.5 tonne capacity 4.00M lift screw hoist having one number of EN-8 Screw shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all material, labor,hire charges and conveyance |
| 28 | OD29559/2025-2026:Trial run of the new shutter with its hoisting mechanism including cost of labour, all lead and lift etc complete as per the direction of deptl officer at site Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender