Tender For Kufri-Mahasu Experiential Trail Development Works At Eco-Development Committee Mahasu Peak, Kufri, Theog Division Hpfd
Tender Value
21.12 Lakhs
Estimated cost
Bid Submission
11 Aug 2026
11 days left
EMD
42250
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Kufri-Mahasu Experiential Trail Development Works At Eco-Development Committee Mahasu Peak, Kufri, Theog Division Hpfd
BOQ
| Sl. No. | Item Description |
| 1 | (PART -A) Civil Woks |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation and trenches (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth all lead lift and sorting out useful and unuseful material and transportation of unuseful material for disposing at dumping site(To be arranged by contractor ) as Directed by Engineer-in –charge. |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundation, footings and bases for columns. |
| 4 | Supplying, filling spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required Thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level: 1:2:4 (1 cement: 2 coarse sand): 4 graded stone aggregate 20 mm nominal size) |
| 6 | 20 mm cement plaster on roughside of single or half brick wall of mix: (1cement: 4 Fine sand) |
| 7 | Providing and applying white cement-based putty of average thickness 1 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. |
| 8 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer |
| 9 | Part-B (Design, Fabrication & Installation) |
| 10 | Designing, conceptualization Printing, Art work Production, Providing and fixing Shop Information Sign Board comprising stainless steel frame fabricated from SS hollow sections, complete with printed ACP/MS panel displaying tourist information content, overall size 900 mm x 1500 mm, fixed on RCC concrete foundations of size 900 mm depth below ground level, including welding, fixing, lettering, transportation and all leads and lifts complete. (History & Facts) |
| 11 | Designing, Conceptualization, printing, Art work production, providing and fixing shop Identification Sign Board (A-9) comprising stainless steel frame with decorative top profile, complete with printed panel for shop identification overall display size 300 mm x 600 mm, fixed in RCC concrete foundations including excavation, welding, lettering and all incidental works complete. (Responsible Tourism) |
| 12 | Designing, Conceptualization, Printing, Art work production, Providing and fixing Trail Map Sign board (A1& A2) comprising stainless steel frame with weather resistant printed map panel, overall display size 1200mm x 1800 mm, mounted on SS posts fixed in RCC concrete foundations 900 mm deep below ground level, including excavation, concrete, welding, digital printing, installation and complete in all respects. |
| 13 | Designing, Conceptualization, Printing, Art work Production, providing and fixing Trail Sign Board (A5, A6 & A7) comprising stainless steel frame with printed trail map panel of size 1200 mm x 900 mm mounted above ground clearance of 900 mm, total structure height 2700 mm with RCC concrete foundation 900 mm deep below ground level, including excavation, concrete, welding, printing and installation complete, Do’s and Dont |
| 14 | Designing, Conceptualization, Printing, Art work Production, Providing and executing exterior grade wildlife/nature themed wall mural artwork on existing masonry / plastered surface using weather resistant acrylic paints, including surface preparation, primer coat, artistic painting, protective UV resistant clear coat and all complete as per approved design including all materials, labour, scaffolding and finishing complete. |
| 15 | Designing, Conceptualization, Printing, Art work production, providing and executing exterior grade wall mural artwork on Entry Gate Structure including surface preparation, primer, weather resistant acrylic painting and protective coating complete including all materials, labour scaffolding and finishing complete. |
| 16 | Designing, Conceptualization, Printing , Art work production, Providing, fabricating, supplying, transporting and fixing decorative “ ckdk SHIMLA” Selfie Point of overall size 18’-0” (5.49m) long x 14’-0”(4.27m) high comprising two artistic dancing female figures, one on each side, Hindi Work “ckdk” in the Centre and “SHIMLA” lettering below, fabricated from SS 304 Grade mirror-finish stainless steel sheets laser cut to approved profile and mounted on stainless steel hollow section structural framework. The item shall include all SS supporting members, stiffeners, base plates, anchor fasteners, welding, grinding, buffing, mirror polishing, erection, alignment, fixing and all labour materials, tools and plants complete as per approved drawings and directions of Engineer-in-charge |
| 17 | Designing, Providing, fabricating, supplying and fixing outdoor information sunboards/ placards comprising weather –resistant UV printed graphic panels on high-pressure laminate (HPL), ACP, fibre cement board or equivalent approved material, displaying information regarding flora, fauna, heritage, trekking routes viewpoints, environmental awareness and tourist guidance. The boards shall be mounted on treated deodar wood. Seasoned hardwood posts or approved composite support structure, including digital artwork, printing, protective anti-fade UV coating, excavation, PCC foundation blocks, fixing hardware, installation and all labour, materials, tools and plants complete as per approved design and directions of Engineer-in-charge |
| 18 | Designing, Conceptualization, printing, Art work Production, providing, fabricating, supplying and fixing Animal Proof Dustbin of minimum 100-120 litre capacity fabricated from MS Sheet not less than 2.0 mm thick and MS square/ rectangular hollow section framework, comprising animal resistant self – closing top lid, lockable access door, internal removable waste collection bin, base frame and support legs. The times shall be treat with metal primer, zinc chromate primer and finished with two- coats of exterior grade synthetic enamel paint/PU paint of approved shade. The work includes cutting, bending, welding, grinding, fabrication transportation, excavation, PCC/RCC foundation, anchor fasteners, erection and fixing complete in all respects as per approved drawing and directions of Engineer-in-Charge. |
| 19 | Providing, fabricating, supplying and fixing decorative Trail Milestone Market fabricated from MS plate of minimum 3 mm thickness and MS hollow section framework, displaying trail name, destination, direction and distance information with engraved, cut-out, painted or vinyl graphics. The item shall be complete with structural support, base plate, anchor bolts, excavation, PCC/RCC foundation, welding, grinding, metal prime, zinc chromate primer and two coats of exterior grade synthetic enamel/PU paint of approved colour and shade, including transportation, erection and fixing complete in all respects as per approved drawings and directions, of engineer-in-charge. |
| 20 | Providing, fabricating, supplying, transporting and erecting Waste bank Structure of overall size approximately 6000 mm x 3000mm comprising mild steel tubular/box section framework, sloping roof structure, chain link wire mesh enclosure, colour coated PGI Sheet cladding on side walls, double leaf access gate of size 1800 mm wide x 2400 mm high , complete with all horizontal and vertical bracing members foundation plates, anchor bolts , welding, grinding and fabrication works, The structure shall be finished with one coat of zinc chromate primer and two coats of approved synthetic enamel/PU paint over all exposed steel surfaces, .The items includes, erection, fixing, transportation, labour tools and plants, and all incidental works complete in all respects as per approved drawing and directions of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysAug 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender