Tender For Constructing One Rooms Building Zilla Parishad Primary School @ Kadit Bk. Tal- Shrir Ur , Dist -Ahilyanagar
Tender Value
9.59 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
5 days left
EMD
9593
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Constructing One Rooms Building Zilla Parishad Primary School @ Kadit Bk. Tal- Shrir Ur , Dist -Ahilyanagar
BOQ
| Sl. No. | Item Description |
| 1 | Item no.1 : -Excavation for foundation in earth, soil of all types sand, gravel and soft murum, removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering preparing the bed for foundation and necessary back filling, ramming, watering (including shoring and strutting) complete. (Bd.A.1 page no.259) |
| 2 | Item No.2:- Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete. (Spec. No. : Bd.A.1 Page No. 259) |
| 3 | Item no.3 : - Providing dry trap stone solling 15 cm to 20 cm thick including hand packing and compacting compete. (Bd.A.12/P.264) |
| 4 | Item no.4 :-Providing and laying in situ, cement concrete M10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water manually, form work, compacting and curing. (Spec.No.Bd.E.1/P.287) |
| 5 | Item no.5:-Providing and laying in situ, cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, grillage, stripes, foundations and footings of R.C.C. columns and steel stanchions including bailing out water manually, form work, compacting, curing and roughening them if special finish is to be provided.(Excluding reinforcement,and structural steel) (Spec.No.Bd.F.2/P.298/IS456:200) |
| 6 | Item no.6 :-Providing and laying in situ, cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed drawing and designs, or as directed including, centering formwork , compaction finishing the formed surface with cm 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing. etc. comp (Excluding reinforcement ) The c.m.1:3 plaster is considered for rendering uneven and honeycombed surface only.Wooden planks/shuttering will not be allowed. (Spec.No.Bd.F.5/P.300/ IS456:200) |
| 7 | Item no.7 :-Providing and laying in situ, cement concrete M-20 M-20 of trap/granite/quartzite/gneiss metal for R.C.C. beam and lintels as per detailed drawing and designs, or as directed including, centering form work, compaction finishing the formed surface with cm 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing.(Excluding reinforcement.The c.m.1:3 plaster is considered for rendering uneven and honeycombed surface only.Wooden planks/shuttering will not be allowed.) (Spec.No.Bd.F 6/P.300 IS456:200) |
| 8 | Item no.8 :- Filling in plinth and floors with contractor's material approved by Engineer-in-charge in 15 cm to 20cm. layers including watering and compaction complete. (Spec. No. : Bd.A.11 Page No. 263) |
| 9 | Item no.9 :- Filling in plinth and floors with excavated material approved in 15 cm to 20cm. layers including watering and compaction complete. |
| 10 | Item no. 10 :-Providing second class burnt brick masonry with conventional/ I.S. type bricks in C.M. 1:6 in foundations and plinth of inner walls/in external walls including bailing out water manually, striking joints on unexposed faces, racking out joints on exposed faces and watering complete. |
| 11 | Item no. 11 :-Providing second class burnt brick masonry with conventional/ I.S. type bricks in C.M. 1:6 in Superstructure including striking joints on unexposed faces, racking out joints on exposed faces and watering and scaffolding complete. (Spec.No.Bd.G.5/Page No.315) |
| 12 | Item no.12 :-Providing and laying in situ, cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. Slab and landings……….cm.thick as per detailed drawing and designs, or as directed including, centering form work, compaction finishing the formed surface with cm 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing.(Excluding reinforcement.The c.m.1:3 plaster is considered for rendering uneven and honeycombed surface only.Wooden planks/shuttering will not be allowed.) (Spec.No.Bd.F 8/P.302/ IS456:200) (I.5/I/P.19) |
| 13 | Item no.13:-Providing and fixing in position TMT steel bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches etc. as per detailed designs, drawing and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (From integrated plant) (Spec.No.Bd.F.17/Page No.306) |
| 14 | Item no.14 : -Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamber conforming to I.S. 6,523-1,983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm Spec.No.: As directed by engineer-in-charge |
| 15 | Item no.15 : -Providing and fixing solid core flush door commercial type on single leaf 16 mm thick Bison Panel cement bonded particle Board including Teak wood lipping beading on all four edges without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast,stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting three coats complete. |
| 16 | Item No16:Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.) |
| 17 | Item no.17 :- Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 18 | Item no.18 :-Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete. b) Granite |
| 19 | Item No19:Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 20 | Item no.20 :-Providing internal cement plaster 12 mm. thick in single coat in cement mortar 1:4 with neeru finish to concrete or brick surface, in all position including scaffolding and curing complete.(Spec.No.Bd.L 2/ Page No.368 ) (Spec.No.Bd.L 10/ Page No.370) |
| 21 | Item no.21 :-Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 22 | Item no.22 :-Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring |
| 23 | Item No23:-Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for steps and dado of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS 1237 - 1980 reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm ,skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing,polished and cleaning etc. complete. For steps, and dado |
| 24 | Item no.24:-Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in two coats including scaffolding, preparing the surface. (Including primer coat) etc. complete. |
| 25 | Item No25:Providing and applying three coats of cement paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. |
| 26 | Item no.26 :Providing waterproof bedding for terrace slab , 25 mm thick in C.M 1:3 including using approved water Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. |
| 27 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 28 | Item No.28 :Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender