Tender For maintenance and repair To Water Supply Scheme @ Chakan And Pcia Industrial Area... annual maintenance contract With Rectification And Commissioning Various Rotating Devices At Pcia And Chakan Water Supply.
Tender Value
35.84 Lakhs
Estimated cost
Bid Submission
13 Aug 2026
13 days left
EMD
35900
Bank guarantee accepted
Document Fee
10030
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance and repair To Water Supply Scheme @ Chakan And Pcia Industrial Area... annual maintenance contract With Rectification And Commissioning Various Rotating Devices At Pcia And Chakan Water Supply.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jul-2026 | CORRIGENDUM | Other | 13-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&R to WSS @ Chakan and PCIA Industrial Area... AMC with Rectification and commissioning various rotating devices at PCIA and Chakan water supply. |
| 2 | 1) Rewinding.1.1) Rewinding of electric motor above 3 HP upto 5 HP three phase upto 1400 RPM of all types and makes with copper wire confirming to IS 13730 : 2012, overhauling with minor repairs, lubricating of ball bearings & bush bearing, replacing screws etc. testing for the original speed and no load consumption with guarantee for one year |
| 3 | 2) Rewinding and repairs of Squirrel cage induction motors, with F class insulation including baking, varnishing, painting etc. (The scrap of winding material shall be retained by rewinder.)2.1) 45 HP |
| 4 | 2) Rewinding and repairs of Squirrel cage induction motors, with F class insulation including baking, varnishing, painting etc. (The scrap of winding material shall be retained by rewinder.)2.2) 100 HP |
| 5 | 2) Rewinding and repairs of Squirrel cage induction motors, with F class insulation including baking, varnishing, painting etc. (The scrap of winding material shall be retained by rewinder.)2.3) 125 HP |
| 6 | 3) Rewinding & repairs of submersible pump motor of all type and make from 5HP to 25 HP |
| 7 | 4) Rewinding of Auto transformers suitable for 100/125 HP pump operation including dismantling, rewinding with new insulated copper wire/strips of proper size, varnishing/ backing and filling with fresh transformer oil, painting assembly and testing of works and delivery at site. (The scrap of winding material shall be retained by rewinder.) |
| 8 | 5) Servicing and overhauling of motors , 3 phase , including removing from location, dismantling cleaning the winding, drying, applying, varnish, baking, changing the bearing if necessary (bearing will be supplied by MIDC) greasing the bearing, assembling, and giving satisfactory trials on No load and full load etc.5.1) 3 to 5 HP |
| 9 | 5) Servicing and overhauling of motors , 3 phase , including removing from location, dismantling cleaning the winding, drying, applying, varnish, baking, changing the bearing if necessary (bearing will be supplied by MIDC) greasing the bearing, assembling, and giving satisfactory trials on No load and full load etc.5.2) 5 to 15 HP |
| 10 | 5) Servicing and overhauling of motors , 3 phase , including removing from location, dismantling cleaning the winding, drying, applying, varnish, baking, changing the bearing if necessary (bearing will be supplied by MIDC) greasing the bearing, assembling, and giving satisfactory trials on No load and full load etc.5.3) 45 HP |
| 11 | 5) Servicing and overhauling of motors , 3 phase , including removing from location, dismantling cleaning the winding, drying, applying, varnish, baking, changing the bearing if necessary (bearing will be supplied by MIDC) greasing the bearing, assembling, and giving satisfactory trials on No load and full load etc.5.4) 100 HP |
| 12 | 5) Servicing and overhauling of motors , 3 phase , including removing from location, dismantling cleaning the winding, drying, applying, varnish, baking, changing the bearing if necessary (bearing will be supplied by MIDC) greasing the bearing, assembling, and giving satisfactory trials on No load and full load etc.5.5) 125 HP |
| 13 | 6) Repairs of motor including dynamic balancing of rotor including shaft metalizing of DE side & NDE side, coversleeve at DE side & NDE side, minor repair of bearing Housing etc. complete.6.1) 3 to 5 HP |
| 14 | 6) Repairs of motor including dynamic balancing of rotor including shaft metalizing of DE side & NDE side, coversleeve at DE side & NDE side, minor repair of bearing Housing etc. complete.6.2) 15 HP |
| 15 | 6) Repairs of motor including dynamic balancing of rotor including shaft metalizing of DE side & NDE side, coversleeve at DE side & NDE side, minor repair of bearing Housing etc. complete.6.3) 45 HP |
| 16 | 6) Repairs of motor including dynamic balancing of rotor including shaft metalizing of DE side & NDE side, coversleeve at DE side & NDE side, minor repair of bearing Housing etc. complete.6.4) 100 HP |
| 17 | 6) Repairs of motor including dynamic balancing of rotor including shaft metalizing of DE side & NDE side, coversleeve at DE side & NDE side, minor repair of bearing Housing etc. complete.6.5) 125 HP |
| 18 | 7) Replacement.7.1) Replacing the existing driving end bearing of original make for electric motor AC single phase / three phase 3 HP to 7.5 HP of all types with required alignment of the shaft and testing the same.. |
| 19 | 7) Replacement. 7.2) Replacing the existing driving end bearing of original make for electric motor AC single phase / three phase 10 HP of all types with required alignment of the shaft and testing the same. |
| 20 | 7) Replacement.7.3) Replacing the existing non driving end bearing of original make for electric motor AC single phase / three phase 3 HP to 7.5 HP of all types with required alignment of the shaft and testing the same. |
| 21 | 7) Replacement.7.4) Replacing the existing non driving end bearing of original make for electric motor AC single phase / three phase 10 HP of all types with required alignment of the shaft and testing the same |
| 22 | 8) Providing & fixing of SKF make bearing.8.1) Bearing No. 7322 BEP |
| 23 | 8) Providing & fixing of SKF make bearing.8.2) Bearing No. 6316 |
| 24 | 8) Providing & fixing of SKF make bearing.8.3) Bearing No.6309 ZZ/ C3 |
| 25 | 8) Providing & fixing of SKF make bearing.8.4) Bearing No.3212 C3 |
| 26 | Providing & fixing of SKF make bearing.8.5) Bearing No.7316 BECBM |
| 27 | 9) Supply of SKF make LGMT 2/1 general purpose high temperature bearing grease(NLGI-2) 1 KG. |
| 28 | 10) Rebate for old bearing Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 daysAug 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender