Tender For Thorough Inside & Outside Repairs And Renovation Including Plumbing & Sanitary Works To Bungalow No. 1 Uf, 1 Gf And Connected Garages And Outhouses At Portland Park C Us.
Tender Value
35.30 Lakhs
Estimated cost
Bid Submission
20 Aug 2026
10 days left
EMD
70606
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Thorough Inside & Outside Repairs And Renovation Including Plumbing & Sanitary Works To Bungalow No. 1 Uf, 1 Gf And Connected Garages And Outhouses At Portland Park C Us.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Aug-2026 | Corrigendum-I | Technical Bid | 20-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. |
| 2 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. Up to 150 mm thick. |
| 3 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.In ground floor including roof. |
| 4 | Dismantling artificial stone flooring up to 50 mm. thick by carefully chiseling without damaging the base and removing rubbish as directed within a lead of 75 m. In ground floor including roof. |
| 5 | Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed (Payment to be made on measurement of portion of roof, wall removed). |
| 6 | Stripping off worn out plaster and raking out joints of walls, ceilings etc. up to any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 7 | Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead up to 75 m as directed. |
| 8 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water as required complete.Depth of excavation not exceeding 1500mm. |
| 9 | Earth work in filling in foundation trenches or plinth with good earth,from excavation of foundation in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) |
| 10 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge |
| 11 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 12 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes. Pakur Variety. |
| 13 | Ordinary Cement concrete (mix 1:1.5:3) with Pakur variety graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 14 | Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface). |
| 15 | Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification |
| 16 | Cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping untill hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the Engineer - in - Charge. |
| 17 | Repairing of damaged concrete surface of beams, columns, slabs etc.prepared under item no above by manual deposition / laying of concrete ( like plastering ) with 1: 1.5 : 3 mortar made with 6mm stone chips, mixing , placing manually with curing and all materials, labours, tools, scaffolding etc all complete. { Payment will be made on the in situ volume of concrete calculated on the basis of av. thickness and surface area cut in a regular shape . This item is applicable only where shuttering is not possible |
| 18 | Hire and labour charges for shuttering with centering and necessary staging up to 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (up to roof of ground floor).25mm. To 30 mm. Thick wooden shuttering without staging in foundation. |
| 19 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation, basement and up to roof of ground floor/up to 4 m .Tor steel/Mild Steel- other than SAIL/TATA/RINL |
| 20 | Brick work with 1st class bricks in cement mortar (1:6). In foundation and plinth |
| 21 | In superstructure, ground floor |
| 22 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 23 | In first floor |
| 24 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour..3 mm. Thick topping (High polishing grinding on this item is not permitted with ordinary cement)Using gray cement. 25 mm. thick. In ground floor |
| 25 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. Area of each tile upto 0.09 Sq.m Coloured decorative |
| 26 | Area of each tile above 0.09 Sq.mColoured decorative |
| 27 | Supplying, fitting & fixing granite slabs 10mm to 12 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. Area of each Granite slab > 0.6 upto 1.0 square metre. [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]. |
| 28 | Supplying, Fitting and fixing Black Stone Slab used in Kitchen slab, alcove, wardrobe etc. laid and jointed with necessary adhesive Cement Mortar (1:2) Including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor Slab Thickness above 25 mm and upto 37.5 mm. |
| 29 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary .[Excluding cost of chipping over concrete surface] Ground floor. 20 mm thick plaster (1:6) |
| 30 | 15 mm thick plaster (1:6) |
| 31 | 10 mm thick plaster (1:4) |
| 32 | In first floor including roof. 20 mm thick plaster (1:6) |
| 33 | 15 mm thick plaster (1:6) |
| 34 | 10 mm thick plaster (1:4) |
| 35 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc.[NOTE : Cement 0.152 cu.m. per 100 sq.m.] |
| 36 | Colour washing with any shade with stainers, as required including cleaning and smoothening surface thoroughly. Internal surface (All floors). ) Other than yellow, pink . Two coats (on new works only) |
| 37 | Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer - in - charge). |
| 38 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) |
| 39 | Applying interior grade Acrylic primer of approved quality and brand on plastered or concrete surface to received distemper/acrylic emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer’s specification and as per direction of the E-I-C (In ground floor) – one coat –solvent based interior grade Acrylic Primer. |
| 40 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) – Two coats Luxury quality |
| 41 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 42 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 43 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. On timber or plastered surface with super gloss hi-gloss of approved quality. (with any shade except white). Two coats |
| 44 | One coat (with any shade except white) |
| 45 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.On steel or other surface.With super gloss hi-gloss of approved quality-(with any shade except white). Two coats |
| 46 | One coat (with any shade except white) |
| 47 | Supplying best Indian sheet glass panes set in putty and fitted and fixed with teak wood beads and nails complete. (In all floors for internal wall & up to 6 m height for external wall). 3 mm thick (weighing 7.4 kg/Sq.m) |
| 48 | French polishing to wood work including preparing surface (ordinary gloss)On new wood work |
| 49 | Supplying, fitting and fixing in position fibre glass panes of approved quality with resin, nail, clip etc. as per IS:12866-1989. (In all floors for internal wall & upto 6 m height for external wall) 1.2 mm thick (1.85 Kg/Sq.m) |
| 50 | Renewing worn out putty of glass panes : Panes exceeding 0.2 Sq.m but not exceeding 0.5 Sq.m |
| 51 | Panes not exceeding 0.2 Sqm. |
| 52 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected up to three decimals) Sal : Malayasian |
| 53 | Easing door and windows. |
| 54 | Wood work in posts, post plates, rafters, battens, truss members, purlins etc.fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals)Sal : Malayasian |
| 55 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damages complete. (Concrete and brick work for mending damage will be paid separately) Up to area 2.5 Sqm. |
| 56 | Taking out shutter of door and window, dismantling by parts (for repair or replacement of damaged parts), reassembling and refitting and rehanging the same with old fittings but with new screws as necessary. (Where different parts of same shutter are renewed under different item). |
| 57 | Panel (made of single plank) of door and window shutters to design as directed: In Ground Floor including cost of material, labour & carriage all complete.(Payment to be made on area of exposed new work). (In case of non-supply of single plank penal rate of reduction to a maximum of 30% will be made).19mm thick panel of 30cm to 45 cm width Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 58 | Styles and rails of wooden shutters fitted and fixed complete including cost of material, labour, carriage all complete. (Payment to be made on area of new work only). In Ground Floor:For 25mm. Thick shutter Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak |
| 59 | Z-batten shutters of door and window as per design havings tongued and groove-half lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position including cost of wood, labour & carriage all complete but excluding the cost of hinges and other fittings in ground floor.Shutter with 25mm thick planks, 19mm thick battens.Sishu, Gamar, Champ, Badam, Bhola, Morga, Hallak. |
| 60 | Glazed shutters of doors, windows, fan light, clerestory windows etc as per design (with ordinary glass of 7.4 Kg/Sqm. 3 mm thick) fitted with putty bed and teak wood bead and nails including cost of wood & fitting and fixing shutter in position but excluding the cost of hinges and other fittings, cost of glass, putty, wooded beads etc will be paid separately. 35mm thick shutters.Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 61 | Panel shutters of door & window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak.35mm. thick shutters with 19 mm. thick panel of size 30 to 45 Cm |
| 62 | Shutter of 1/3rd panel, 2/3 glazed of doors and windows, as per design (each panel consisting of a single plank without joint and with ordinary glass of 7.4 kg per Sq.m/3mm Thick) fitted with putty bed, teak wood bead and nails including fitting and fixing shutters in position but excluding the cost of glass , putty , teak bead, nails, hinges etc. and other fittings, in ground floor. 35 mm thick shutters with 19mm thick panel. Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak. |
| 63 | Iron butt hinges of approved quality supply, fitted and fixed with steel screws, with ISI mark complete.100 mm. X 58 mm. X 1.90 mm. |
| 64 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: 150mm long x 10mm dia. bolt. |
| 65 | 225mm long x 12mm dia. bolt. |
| 66 | 300mm long x 12mm dia. bolt. |
| 67 | Anodised aluminium skeleton bolt of approved quality manufactured from extruded section conforming to I.S: specification (I.S: 204/74) fitted and fixed with cadmiim plated screws: 450 mm long x 12 mm dia. bolt. |
| 68 | 600 mm long x 12 mm dia. bolt. |
| 69 | Iron hasp bolt of approved quality supply, fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.250 mm. long. |
| 70 | Iron door ring of approved quality supply, fitted and fixed with nut and washer complete. 50 mm dia. |
| 71 | Strengthening corners of shutters with M.S. corner plate supply & fitted with screws complete:3.0 mm thick |
| 72 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately )40 mm X 6 mm, 125 mm Length |
| 73 | Supplying, fitting, Fixing Fly/Mosquito proof nylon net on any type of window , door shutter frame with necessary fixing arrangements complete. |
| 74 | Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make andbrand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor, 4 mm |
| 75 | Renewing X.P.M. including taking out and refixing with new battens made of local wood of size 50mm x 25mm and new screws in etc. complete.25mm x 75mm strand 3.25mm x 1.6mm. |
| 76 | Continuous Welding in M.S. structural work with gas or electric: |
| 77 | Fitting and fixing old pieces of asbestos, G.C.I. or C.I. sheets or plain sheets including closing old holes with washers and sheet-bolts and nuts, etc. and including fixing the same to supporting frame with necessary hook-bolts, washers, putty etc. (excluding cost of sheets). (Payment to be made on area of finished work.)With about half old and half new fittings, including the cost of new fittings. In Roof. |
| 78 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).With 0.5 mm thick sheet . In Roof |
| 79 | Iron parliamentary hinges conforming to IS 362-1982 fitted and fixed complete with steel screws. 175mm. X 125mm. X 27mm. X 2.50mm. |
| 80 | 200mm. X 125mm. X 27mm. X 2.50mm. |
| 81 | Brass hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.250 mm long. |
| 82 | Taking out rain water down pipes, removing chokages and refixing the same in position including mending good damages (of taking out and refixing) |
| 83 | Taking out rain water down pipe. |
| 84 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materials (Spun Yarn, Valamoid / Bitumen / M-Seal etc) complete.UPVC Pipe.110 mm. Dia. |
| 85 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materials (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.UPVC Fittings.Bend 87.5 degree 110 mm. Dia. |
| 86 | Repairing crack in wall by cement grouting (1:2) including widening the crack on the surface (into V section) cleaning and packing the same with cement mortar (1:2) and finishing off to match with adjacent surface (cement - 69Kg/100 M). |
| 87 | Uprooting and removing plants from the surface of walls parapet etc and making good damages. Repairing of damages to be paid separately. Small plant of girth of exposed stem upto 75 mm. lift upto 6 mtr. |
| 88 | Medium size plant of girth of exposed stem above 75 mm. but not exceeding 150 mm. lift upto 6 mtr. |
| 89 | Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm. dia rod complete including mending damages. Payment for damage and repair to be made separately. |
| 90 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS 226, IS 808 & SP (6)- 1964 connected to one another with bracket, gusset, cleats as per design & direction of Engineer-In-Charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS 816-1956 & IS 9595 using electrodes of approved make and brand conforming to IS 814-1957 haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charges of all tools and plants and labour required for the work including all incidental charges such as electricity charges labour insurance charges etc. (Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for Gusset, bracket, cleat, rivets, bolts and nuts may be made by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 kg/m. or 15% of weight for finished structural members weighing less than 22.5 kg/m. may be increased to allow for brackets, cleats, rivets, bolts and nuts etc. and no separate payment being made for these items, as per direction of Engineer-In-Charge. The rates are considered for a height of erection 8m. / 2nd. Floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4 m. beyond initial 8 m. or part thereof.) For structural members of specified sections weighing less than 22.5 kg./m. |
| 91 | Providing rough dressed timber planks fitted & fixed with nut bolts excluding framework complete.Sal Malayasian.35 mm thick planks |
| 92 | Polishing only of old marble or terrazo work with oxalic acid powder using 33 gms/ sq.m. by manual labour / machine where necessary. |
| 93 | Providing labour for lowering and stacking after dismantling in parts RS joists, channels, angles, tees, plates etc complete as directed. From 1st floor level. |
| 94 | Taking out door and window shutters and rehanging the same with old fittings. With new iron screws. |
| 95 | Cement concrete with graded stone ballast (40 mm size excluding shuttering)In ground floor [Pakur Variety] 1:3:6 proportion |
| 96 | Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. |
| 97 | Supplying , fitting and fixing Godrej ultra vertibold brass rim lock. |
| 98 | MS or WI Ornamental grill of approved design joints continuously welded with MS, WI Flats and bars of windows, railing etc supply, fitted and fixed with necessary screws and lugs in ground floor.(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) - Grill weighing above 10 Kg/Sq. Mtr and upto 16 Kg/Sq. Mtr. |
| 99 | Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. |
| 100 | Supplying fitting and fixing 30 mm thick P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of 59 mm x30 mm section with 2.0 mm (+/-0.2 mm) wall thickness.Horizontal & vertical section shall be fixed to each other by self tapping screws and 1 solid polymeric or M.S. galvanised tubular 'L' shaped bracket 100mm x 200mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 120 mm x30mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle, reinforced by solid polymer bar of 200 mm long at both ends and screws from both sides as lock rail. The section frame will then be fitted in by PVC panels of size 100 mmx25 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt,tower bolt,door ring etc. In ground floor. |
| 101 | Cutting of branches of trees and shrubs from the road way or with in R.O.W including disposal of wood and leaves to suitable location as per technical specification Clause 1914 for Rural Roads of MORD. |
| 102 | Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof.In ground floor Glossy/Matt/Suede excluding surface texture or metallic lustre.Thickness of laminate 1 mm |
| 103 | M.F. suspended ceiling made with 12.5 mm thick Gypsum plaster board including G.I. perimeter channel of 0.55 mm flush (having two flanges 20 mm and 30 mm respectively and web 27 mm ) along with perimeter of ceiling with G.I.intermediate channel of 0.9 mm thick size 45 mmx15mm placed at 750 mm c/c with G.I. ceiling angle of size 25 mmx10mmx0.55 mm thick fixed to the ceiling with G.I. Cleat and steel expansion fastener ceiling section 0.55 mm thick of size 51.50 mmx26mm fixed to the intermediate channels with the help of connecting clip and in the direction of perpendicular to the intermediate channel of 300 mm c/c 12.5 mm thick Gypsum plastered board are to be fixed under ceiling section as above by machine screws. The boards are to be joined and finished with jointing compound, paper tape and application of top coat etc. as per the direction of Engineer-in-charge. (The rate includes of cost of all materials including taxes, cost of accessories, fittings and fixtures, scaffolding and labour charges etc.complete)In ground floor |
| 104 | Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. Heavy type (I.S.I. size 3) |
| 105 | Anodised aluminium decorative handle (hexagonal / fluted) of approed quality fitted and fixed complete. 150mm plate x 10mm dia rod x 12mm hexagonal/fluted. |
| 106 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.35 mm thick shutters (single leaf) |
| 107 | Supplying, fitting and fixing in position G.I. pipes of TATA make for exposed works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple,long screw, reducing socket, reducing tee, short piece etc.fitted with holder bat clamps, including cutting pipes,making threads,fitting, fixing etc. complete in all respect including cost of all necessary fitting as required , jointing materials and two coats of painting with approved paint in any position . (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately). 15 mm dia. medium quality |
| 108 | 20 mm dia. medium quality |
| 109 | 25 mm dia. medium quality |
| 110 | For Concealed Work. 15 mm dia. medium quality . 20 mm dia. medium quality |
| 111 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 25 mm dia |
| 112 | 20 mm dia |
| 113 | Supplying, fitting and fixing bib cock or stop cock. Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similarbrand). |
| 114 | Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO / ATLAS or equivalent)15 mm |
| 115 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 116 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approvedquality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats ofapproved paint. 550 mm X 400 mm size |
| 117 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With 'P' trap |
| 118 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to STMD - 1785 and threaded to atch with GI Pipes as per IS : 1239 (Part - I).with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo,nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground (Payment will be made on the centre line measurements of total pipe line ncluding all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) For Exposed Work20 mm |
| 119 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. Sink only. 530 mm X 430 mm x 180 mm |
| 120 | Sink with drain board 1050 mm X 450 mm X 180 mm |
| 121 | Supplying, fitting and fixing 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No.510, 510(A) and Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand). |
| 122 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. Polythene Flush Pipe |
| 123 | Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 450 mm long |
| 124 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 600 mm long |
| 125 | Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Mode- Tropical / Sumthing Special of ESSCO or similar brand) |
| 126 | Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). |
| 127 | CP Wall Mixture without spout but with provision for connnection to Telephone Shower and exposed pipe for Overhead shower (Equivalent to Code No. 5215 & Model - FLORENTINE of JAQUAR or similar brand). |
| 128 | CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No.5041 & Model - FLORENTINE of JAQUAR or similar brand). |
| 129 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm |
| 130 | Supplying, fitting and fixing PTMT Smart Shelf of approved make of size 300 mm. |
| 131 | Supplying, fitting and fixing towel rail with two brackets. C.P. over brass 25 mm dia. and 600 mm long |
| 132 | Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 133 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.E.W.C. Plastic (hallow type) white |
| 134 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992. Single Socketed 3 Meter Length 110 mm |
| 135 | Door bend (LH) & (RH) - 110 mm |
| 136 | Door Y (LH) & (RH) - 110 mm |
| 137 | Pipe clip -110 mm |
| 138 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials.Under ground . Above ground - 110mm dia |
| 139 | Supplying, fitting and fixing C.I. round grating. 100 mm |
| 140 | Supplying and making decorative canopy as per approved design with SHERA Fiber Cement Board or equivalent (Non Asbestos, water resistant, fire resistant, non brittle) and SHERA plank or equivalent with necessary TATA make hollow section steel frame work including one coat promer and two coat paint at steeel structure, sealing joints with adhesive and putty, provide drip coarse etc all complete(Payment to be made on the bottom area of the ceiling of the canopy structure) |
| 141 | Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) )- 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating). |
| 142 | Repair with Epoxy or Polymer Modified Mortar (PMM): Providing and Repairing the damaged concrete portion / Surface preparation with single component ready to use, corrosion inhibiting fiber reinforced repair mortar MOLITH-PMMFCI capable of applying 20 mm avg. thick in single layer initially by hand and finishing with trowel, carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface.The polymer modified mortar is applied when the epoxy bonding coat is still tacky. (Material : Fosroc/ Sika Or equivalent) |
| 143 | Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades |
| 144 | Providing and inserting nipples with approved fixing compound after drilling holes for grouting as perTechnical specifications including subsequent cutting/removal and sealing of the hole asnecessary of nipples after completion of grouting with Cement/Epoxy. |
| 145 | Sealing of cracks / porous concrete by injection process through nipples/Grouting complete as perTechnical specification. Cement Grout |
| 146 | Applying epoxy mortar ( 10 mm nominal thick) over leached, honey combed and spalled concretesurface and exposed steel reinforcement complete as per Technical specification |
| 147 | Providing and laying Vitrified tiles in floor in defined sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size -Size of Tile 600 x 600 mm. |
| 148 | Supplying and laying in the specified pattern of Interlocking concrete Block Pavements (ICBP) with concrete blocks ( with Concrete grade as specified as per Table 1 of IS 15658 : 2006 manufactured from BIS lisence manufacturer, with spacer nib (small protruding profiles onthe vertical fase of a paper block used as a device for keeping minimum joint gaps in betweenthe paving blocks, as per clause no. 3.26 of IS 15658 ) and of asecified size nd shape with aspect ratio ( the ratio of length to thickness of a paper block, as per clowse no. 3.3 of IS 15658 as per table 2 of IS 15658 with Flexural strength / Breaking Load as per annexured G of IS 15658 on the prepaired base couse on specified CBR as per tabil 1 of IRC SP 63 (2018) or else as mentioned in design and drawing with a cushion of compacted bading sand of 25mm to 35mm thick ( grading of the bading sand as per clowse 6.5.1 of IRC SP - 63) and filling up the gaps in between paper blocks with jointfeeling sand ( the grading of the joint feeling sand will be as per clowse 6.5.2 of IRC SP 63 ) and completing the ages with cut blocks as per clowse no. 8.7 of IRC SP - 63 (2018) with proper confinement of bading and joint feeling sand, compaction, lavling and feeling up of the edge gap. 60 mm thick colour decorative |
| 149 | Supplying and laying true to line and level High Grip, Scratch resistant,Neutral to UV rays, Full Body Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and tested in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance: 0.6, Mohr's hardness > 7.0, Staining resistance: Class- 1, Water Absorption E < 0.5%] & MOR > 35N/sq.mm and Breaking strength > 1500 N for Outdoor area of building e. g. Gang-way, Corridor, Driveway, Parking lots, Courtyards, Sloping ramps, Entrance lobbies, Patios, Portico etc. set over necessary underlay and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles and removal of wax coating of top surface of tiles with warm water and cleaning the tiles using soft and dry cloth complete including the cost of materials, labour and all other incidental charges complete including backside slurry but excluding the cost of underlay and true to the manufacturer's specification and direction of Engineer-in- Charge.In Ground Floor: Sizes-300 mm x 300 mm x10 mm |
| 150 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.One Coat In Ground Floor: |
| 151 | In first floor |
| 152 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.Premium 100% Acrylic Emulsion (Two Coat)In Ground floor |
| 153 | In first floor |
| 154 | Renewing cornice (with mouldings but without floral or similar intricate patterns) including necessary masonry work and 15 mm.thick cement plaster(1:4) complete : Projection (250 to 300) mm.(a) Depth (100 to 125) mm (Cement 8.5Kg/Mtr.) In ground floor. |
| 155 | In first floor |
| 156 | Projection (400 to 450) mm.(a) Depth (150 to 200) mm (Cement 15.0Kg/Mtr.) In ground floor. |
| 157 | In first floor |
| 158 | Multiple-band moulding (horizontal or vertical) made with 15mm cement plaster (1:4) complete : Projection upto 25 mmDepth or width (75 mm to 100 mm) (Cement 2.5Kg/Mtr.). In ground floor. |
| 159 | In first floor |
| 160 | Projection 40 mm Depth or width (75 mm to 100 mm) (Cement 3.5Kg/Mtr.) In ground floor. |
| 161 | In first floor |
| 162 | Renewing valve rod of size 37.5mmx 37.5mm for Venetian Shutters fitted and fixedwith old plated screw(a) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. |
| 163 | Wooden venetian/ Louvered valves, fitted and fixed with plated hooks complete:12mm thick valves.(b) Ordinary Teak Wood. |
| 164 | Fixed louver shutters of doors and windows as per design, including fitting & fixing same in position but excluding the cost of hinges and other fittings in ground floor.35mm thick shutters with 12mm thick valve. Ordinary Teak Wood. Sq.M 4692 |
| 165 | Venetian shutters of doors and windows as per design with valves fixed to valve and rod with plated hooks including cost of plated hooks and fitting, fixing shutters in position but excluding the cost of hinges and other fittings. In ground floor:(ii) 35mm thick shutters with 12mm thick panel.(a) Ordinary Teak Wood. |
| 166 | Renewing ornamental baluster (Balustrade) as per designincluding mending good all damages complete.(d) With baluster of cement concrete (1:1½:3) with stonechips and with nominal reinforcement (floral or intricatepattern height not exceeding 1200 mm.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 05, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 20, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysAug 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender