Tender for Running & Maintenance of Public Health Services and Other Allied Works (judge Houses) in Sector 03 and 10 Chandigarh (under Maintenance Booth Sector 16, Chandigarh).
Tender Value
5.97 Lakhs
Estimated cost
Bid Submission
05 Aug 2026
5 days left
EMD
11955
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Running & Maintenance of Public Health Services and Other Allied Works (judge Houses) in Sector 03 and 10 Chandigarh (under Maintenance Booth Sector 16, Chandigarh).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : DSR 4.1 |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) DSR 4.1.3 |
| 3 | Brick work with common burnt clay F.P.S. (non plinth level up to floor V level in all shapes and sizes in : DSR 6.1 |
| 4 | Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.1.2 |
| 5 | 12 mm cement plaster finished with a floating coat of neat cement of mix : DSR 13.7 |
| 6 | Cement mortar 1:4 (1 cement : 4 coarse sand): DSR 13.7.2 |
| 7 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: DSR 17.3 |
| 8 | W.C. pan with ISI marked black solid plastic seat and lid. DSR 17.3.2 |
| 9 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: DSR 17.7 |
| 10 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps: DSR 17.7.2 |
| 11 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge: DSR 17.16.A |
| 12 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete: DSR 17.28 |
| 13 | Flexible pipe DSR 17.28.2 |
| 14 | 32 mm dia DSR 17.28.2.1 |
| 15 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete: DSR 17.31 |
| 16 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (EXPOSED): DSR 18.10 |
| 17 | 20 mm dia nominal bore: DSR 18.10.2 |
| 18 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : DSR 18.11 |
| 19 | 15 mm dia nominal bore DSR 18.11.1 |
| 20 | 20 mm dia nominal bore DSR 18.11.2 |
| 21 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality: DSR 18.17 |
| 22 | 20 mm Nominal bore DSR 18.17.1A |
| 23 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: DSR 18.18 |
| 24 | 20 mm DSR 18.18.2 |
| 25 | Providing and fixing uplasticised PVC connection pipe with brass unions: DSR 18.21 |
| 26 | 45 cm length DSR 18.21.2 |
| 27 | 15 mm nominal bore DSR 18.21.2.1 |
| 28 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): DSR 18.46 |
| 29 | 15 mm nominal bore DSR 18.46.1 |
| 30 | 20 mm nominal bore DSR 18.46.2 |
| 31 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 32 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : DSR 18.49 |
| 33 | 15 mm nominal bore DSR 18.49.1 |
| 34 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms: DSR 18.51 |
| 35 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge: DSR 18.53A |
| 36 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: DSR 18.53 |
| 37 | 15mm nominal bore. DSR 18.53.1 |
| 38 | Providing and fixing flush plate for concealed cistern MODEL NO. JCP-CHR-392415 |
| 39 | Providing & Fixing SS Sink AISI 304 ( 18/8 ) Grade complete with CP Waste and other fittings .Size 27\\" x 20\\" x 8\\" |
| 40 | Providing and fixing counter top hand basin make cera , commet complete with CP waste or equivelant in same range |
| 41 | Providing and fixing hand shower health faucet ABS body with one meter easy flex tube in crome finish and wall hook complete make Jaquar Model ALD -587 or Equivalent |
| 42 | Providing and fixing of Anglular stop cock, with wall flange, make Jaquar range floratine or equivalent in same range |
| 43 | 15mm nominal bore |
| 44 | Providing and fixing of C.P. Towel Ring Square with round flange complete, make Jaquar range Continental Model ACN-1121N |
| 45 | Providing and fixng of CP brass soap dishmake Jaquar / continental ACN -1131 N or equivalent in same range |
| 46 | Providing anf fixing of CP cup heavy duty complete in all respect as per entire satisfaction and approval of make by EIC. |
| 47 | Providing and fixing 22\\"x16\\" (550x400) mm beveled edge mirror complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 48 | Provd & fixing of C.P. Towel Rail 450 mm long make Jaquar Continental Model ACN-1111BNM |
| 49 | Providing and fixing of overhead shower 200X200 mm square shape single flow with arm dia 20 mm and 450 mm long round shape , make Jaquar OHS 1619 & SHA-479L450 |
| 50 | Providing and fixing of hand shower 80 mm round shapemulti flow with ABS body crome plated with gray face plate without rubit cleaning system and 1.5 mtr long flex tube in crome finish SHS- CHR -1985 or equivalent in same range |
| 51 | Providing and fixing of CP toilet paper holder make Jaquar Continental Model ACN 1151 N or equivalent in range complete in all respect |
| 52 | Providing and fixing of CP tumbler holder make Jaquar Continental Model ACN 1141 N or equivalent in range complete in all respect |
| 53 | Providing and fixing of Glass corner self make Jaquar Continental Model CAN- 1173 complete in all respect |
| 54 | Providing and fixing of CP towel rack with lower hangers make Jaquar Continental Model ACN- 1181 N complete or equivalent range in all respect |
| 55 | Providing and fixing of single lever basin mixture without pop up waste system with 450 mm long braid 3 in 1 with provision for both hand and overhead shower with connecting leg complete make Jaquare OPAL PRIME or equivalent to same range. |
| 56 | Providing and fixing of single lever sink mixture with swinging spout on upper side wall mounted model with connecting legs and wall flanges make Jaquare floratine FLR 53090N or equivalent to same range. |
| 57 | Providing and fixing of sink cock with swinging spout on upper side wall mounted model with connecting legs and wall flanges make Jaquare floratine FLR -5347N or equivalent to same range |
| 58 | P/F of chinaware wall mounted/wall hanging Eurpeon Style W.C. 360mm X 575mm X 360mm of make (JAQUAR) of approved colour with all other fittings i.e. seatcover Jaquar ARIA or as per approved make list. |
| 59 | Providing and fixing concealed stop cock complete with internal part body make jaquar opal prime or as per approved make list |
| 60 | Providing and fixing CP Gratting Heavy Duty With/Without Hole Make Vikking |
| 61 | Providing and fixing of Table Top Wash basin complete with CP waste Make Jaquar FNS-WHT-40931 or as per approved make list |
| 62 | P/F of chinaware Two Piece wall hung EWCcomplete with Cister, Seat Cover and Twin Flush Fittings pf make CERA Model CRUSE/CAMBELL (Seat 2038/2099, Cistern 2118, Seat Cover 2328B, Twin Flush Fitting 2218) or as per approved make list |
| 63 | Providing and fixing of Free Standing Shower Enclosure with stablizer, 8 mm thick tempered Glass, Chrome Finish Height 2000 mm make Jaquar JSE-CHR-S810S0812H20Xf equivalent make in the same range of AOR. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender