Tender For Provn Of Partition Wall For Extention Of Corridor In Power Room, Provn Of Radio Antenna Mast And Provn Of Separate Glass Cabin For Ups & Battery Bank At Af Stn Bikaner Under Ge (Af) Nal
Tender Value
4.20 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
13 days left
EMD
9000
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Partition Wall For Extention Of Corridor In Power Room, Provn Of Radio Antenna Mast And Provn Of Separate Glass Cabin For Ups & Battery Bank At Af Stn Bikaner Under Ge (Af) Nal
BOQ
| Sl. No. | Item Description |
| 1 | M&L for brick work with old size sub class \\"B\\" brick straight or curved on plan exc 6 m mean radius and build in cement mortar 1:4 complete all as specified and directed. |
| 2 | M&L for rendering 15mm thick on brick or concrete surfaces in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for rendering 15mm thick on brick or concrete surfaces other than fair face of brick work in cement mortar 1:4, finishing surfaces even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for applying Three coats of white wash on plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed. |
| 5 | M&L for Preparation of newly plastered or unplastered surfaces of walls and applying two coats of exterior acrylic emulsion in any pattern (approved by GE), paint over and including a coat of exterior primer complete all as specified and directed. |
| 6 | M&L for Preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper white or tinted over and including a coat of primer complete all as specified and directed. |
| 7 | S&F anodised aluminium powder coating aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron)frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 8 | S&F anodised aluminium Powder coating window and ventilator shutters, side hung type without sash bars aluminium section weighing not less tha 0.55Kg/m (with style and rail of size 47.62 x 44.45 x 1.67mm) including necessary joining cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading screws , anodised aluminium fittings such as peg stays 150mm long (1no), hinges type B-21 100mm long(2 no.) suitable handle(1 no) including all necessary builders hardware complete all as specified and directed. |
| 9 | S & F as aluminium grill of size, 85mm x 85mm hexagonal shaped mesh, fixed to aluminium frame work with 'U' clip of size 15mmx12mm & fastners complete all as specified and directed. |
| 10 | S & F 4.80 mm thick sheet glass of ordinary quality plain / tinted and glazing with rubber beads, clips etc complete all as specified and directed. |
| 11 | Material & Labour for pressed steel frames with 1.25 mm thick sheet for doors of size 105 x 60 mm for doors with one or more rebate incl necessary fixing lugs, hinges, lock, strike plates of 50 x 3mm welded with frame and making arrangement for fixing of door spring etc. complete all as specified and directed. |
| 12 | Supply and fixing Flush shutters, 40 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed. |
| 13 | Material & Labour barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed. |
| 14 | Supply and fixing aluminium fabricated type extruded handles of size 150mm complete all as specified & directed. |
| 15 | S&F as in repairs of 300mm mild steel ordinary rat tail rod pattern door spring incl roller and roller plate complete all as specified and directed. |
| 16 | Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed. |
| 17 | Material and Labour for preparation of new surfaces of wood & wood based surface of any description not otherwise described, over 10 cm width & girth and applying two coat of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material and Labour for preparation of new steel & steel based surface of any description not otherwise described, over 10 cm width & girth and applying two coat of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 19 | M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sides of rounded or chamfered on edges of brick work interlocking tiles complete all as specified and directed by Engineer -in-charge. |
| 20 | M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surface of concrete complete all as specified and directed. |
| 21 | M&L for plain cement concrete 1:2:4 type B2 using 40mm graded aggregate as in foundation and mass concrete. |
| 22 | M & L for Rendering 5 mm thick with CM 1:6 on fair face of brick work/concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 23 | M&L for preparation of new plastered surface and apply two coats of Acrylic Smooth exterior paint of required shade applied over one coat of alkali resistant primer in camaflouge pattern complete all as specified and directed. |
| 24 | S & F steel work in tubular vertical pole, stanchions, purlin, girder, bracing etc. Including special shaped washer etc complete using ERW or specified butt welded tubes confirming to IS 1161-1998, IS-4923-1997 grade St-310 complete all as specified and directed. |
| 25 | Material and labour mild steel Round Bars 10 mm dia and above of FE-410-W, Gde E-250 A quality cut to length bend to shape required including cranking bending spirally for securing wire mesh complete all as specified and directed. |
| 26 | Banks, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed. |
| 27 | Excavating in post holes ( or similar holes ) each n.exc 0.50cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm as in Hard/Dense soil complete all as specified and directed. |
| 28 | M&L for hardcore of Broken stone Broken or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 29 | M&L for cement concrete type D2, 1:4:8( 40 mm graded agg) 75 mm thick as in sub base of flooring complete all as specified and directed. |
| 30 | M & L for 30mm sand cushion, filling under floors/tiles or in foundations including watering and consolidation complete all as specified and directed. |
| 31 | M & L for laying 60 mm thick rubber moulded, vibratory finished precast concrete interlocking paver block and shape and size conforming to IS -15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 32 | Surface excavation in soft/ loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed. |
| 33 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils complete all as specified and directed. |
| 34 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 35 | S & F Toughned glass 12 mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. ® complete all as specified and directed. |
| 36 | S & F 6 mm thick high quality, durable acrylic panel sheet and glazing with rubber beads, clips etc complete all as specified and directed. |
| 37 | S & F double action floor door spring hydraulically regulated made up minimum 1.25 thick aluminium alloy sheet foundation box, main body stainless steel cover, with governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 38 | M & L for Point wiring on concealed conduit with 1.5 Sq mm copper conductor single core PVC insulated unsheathed 1100 V grade multistranded drawn into and including stove enamelled steel conduit with accessories of suitable dia medium grade concealed in walls/floors and pressed steel terminal boxes MS, duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated sheet including one running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for one light/ bell/ ceiling fan/ exhaust fan point controlled by one, one way switch all as specified.Note : Rate quoted by the contractor is incl for cutting chassis for concealed the conduit and making good the disturbed surfaces to match with the existing finishes completed all as directed by Engineer-in-Charge. |
| 39 | Supply and fix switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed. |
| 40 | Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. |
| 41 | Supply & fix flame proof exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed. M&L for disconnecting from the existing location cutting off worn out aluminium cable end and Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured,electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core including taking out existing cable of any size. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender