Tender For Repair And Maintenance Of Ci/Gi/Di Pipe Line, Pumping Set, Sluice/ Foot Valve, Nrv Valve Chamber, Lt Control Panel Etc Incl Cleaning Of Oh Tank And Ug Sump In Ncat, Tech Area, Residential Area And Bhingar Pump House At Vrde Ahmednagar.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
26 Aug 2026
1 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Ci/Gi/Di Pipe Line, Pumping Set, Sluice/ Foot Valve, Nrv Valve Chamber, Lt Control Panel Etc Incl Cleaning Of Oh Tank And Ug Sump In Ncat, Tech Area, Residential Area And Bhingar Pump House At Vrde Ahmednagar.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying GI/DI/CI pipe and getting out trimming the sides, forming bottom surface to required level in soft/loose soil complete all as specified and as directed. |
| 2 | Returning, filling in , including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick after laying and testing of cable/pipes complete all as specified and as directed. |
| 3 | Removing excavated material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. |
| 4 | Supply and fix in replacement gun metal gate valve ISI marked with iron wheel head, screwed both ends for iron pipes including taking down the existing unserviceable one of following sizes complete all as specified and directed.(a) 20 mm dia. |
| 5 | (b) 25 mm dia. |
| 6 | (c) 40 mm dia. |
| 7 | (d) 50 mm dia |
| 8 | Taking down the steel tubing and connections in trenches, wall / floor including cleaning for refixing or removal to store for pipe line of following bore. complete all as specified and directed. (a) 15 mm to 40 mm nominal bore |
| 9 | (b) Above 40 mm nominal bore |
| 10 | Supply and laying steel tubes, galvanised,\\"medium \\" grade, including necessary GI fitting such as elbows, bends, Tees , Unions, nipples etc, laid in trenches fixed on wall/floor/ceiling and refilling complete with fixing accessories such as clamps, hooks etc , complete all as specified and directed for following size:-(a) 15 mm bore pipe |
| 11 | (b) 20 mm dia pipe |
| 12 | (c) 25 mm dia pipe |
| 13 | (d) 40 mm dia pipe |
| 14 | (e) 50 mm dia pipe |
| 15 | (f) 80 mm dia pipe |
| 16 | (g) 100 mm dia pipe. |
| 17 | Supply and laying High density polyethylene pipes (HDPE) 75 -100mm bore pipe of pressure rating 6 kgf/cm2 , including necessary fittings such as elbows, bends, Tees , Unions, nipples etc, laid in trenches fixed on wall/floor/ceiling complete with fixing accessories such as clamps, hooks etc , complete all as specified and directed. |
| 18 | Laying only in trenches/wall/floor, in old or new position, old GI pipes obtained from item No-04.00 after necessory cleaning internally and externally both, returning the old screw threads and replacement of all old fittings with new of size of pipe 15mm. complete all as specified and directed. |
| 19 | All as per above item but of size 20 mm dia. |
| 20 | All as per item herein above but of size 25 mm dia. |
| 21 | All as per item herein above but of size 40 mm dia. |
| 22 | All as per item herein above but of size 50 mm dia. |
| 23 | All as per item herein above but of size 80 mm dia. |
| 24 | All as per item herein above but of size 100 mm dia. |
| 25 | Taking up and down CI / DI water mains including all fittings lead / tyton joints, buring out of joints and recovering lead for the following bore sizes of pipes complete all as specified and directed. Note:- Earth work /excavation for taking out pipe lines shall be measured and paid separately under relevant items. (a) 200 mm dia |
| 26 | (b)150 mm dia |
| 27 | (c) 100 mm dia |
| 28 | M & L for ductile iron pipes type K-9, 100 mm dia with spigot and socket ends centrifugally cast in any lenth laid in trenches complete all as specified and directed. |
| 29 | M & L for 150 mm dia ductile iron pipes Type K-9 with spigot and socket ends centrifugally cast in any length laid in trenches complete all as specified and directed. |
| 30 | M & L for ductile iron pipes type K-9, 200 mm dia with spigot and socket ends centrifugally cast in any lenth laid in trenches complete all as specified and directed. |
| 31 | Providing and laying in position cement concrete of 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level |
| 32 | Taking out sluice valves refacing, regrinding and refixing for following diameters of pipe line. complete all as specified and directed.a) 200 mm dia |
| 33 | b) 150 mm dia |
| 34 | c) 100 mm dia |
| 35 | d) 80 mm dia |
| 36 | M&L for run lead joint in position of size 200 mm CI/DI pipes by burning out existing joints,recovering lead, cleaning internal surfaces of socket and providing new joints with using recovered lead and additional new lead,and new spurnyarn making joint leak proof. complete all as specified and directed. |
| 37 | All as per item herein above but Size of CI/DI pipe 100mm. |
| 38 | Supply and fix in replacement sluice valve both ends flanged, ISI marked with CI body, heavy duty, high pressure with CI wheel and stainless steel spindle of class PN 1.6 complete including rubber gasket and suitable size ms bolts, nuts and washers complete all as specified and directed of following sizes: (a) 80 mm dia pipe. |
| 39 | (b) 100 mm dia pipe |
| 40 | (c) 150 mm dia pipe |
| 41 | (d) 200 mm dia pipe |
| 42 | Supplying, fixing, jointing and testing cast iron double acting air release valve heavy duty ISI marked with iron wheel and stainless steel spindle conforming to latest IS with flanged ends complete all as specified and directed for the following sizes:-a) 80mm bore |
| 43 | b) 100mm bore |
| 44 | Material and labour for providing and fixing flanged joints, including nuts, bolts and gaskets of the following sizes, complete with testing of joints. complete all as specified and directed.(a) 80 mm dia pipe |
| 45 | (b) 100 mm dia pipe |
| 46 | (c) 150 mm dia pipe |
| 47 | (d) 200 mm dia pipe |
| 48 | M&L for lead wool joint in position of size 200 mm CI/DI pipes by providing new additional lead wool complete all as specified and directed. |
| 49 | M&L for lead wool joint in position of size 150 mm CI/DI pipes by providing new additional lead wool complete all as specified and directed. |
| 50 | M&L for lead wool joint in position of size 100 mm CI/DI pipes by providing new additional lead wool complete all as specified and directed. |
| 51 | M&L for lead wool joint in position of size 80 mm CI/DI pipes by providing new additional lead wool complete all as specified and directed. |
| 52 | Supply and fix in replacement Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of following size complete all as specified and directed.(a) 25 mm dia |
| 53 | (b) 20 mm dia |
| 54 | Providing and laying S&S C.I. /D.I. standard specials upto 200mm dia such as tees, bends,collars, tapers, caps etc complete all as specified and directed. |
| 55 | Providing and laying flanged C.I./D.I. standard specials upto 200 mm dia such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing complete all as specified and directed. |
| 56 | Cutting existing road black top surfaces of required width and depth for laying of pipe line, refilling and making good after laying of pipe with removed soil and finally sealed with cement concrete of thickness not less than 100 mm to match with the top surface of Road.(Cement concrete shall be measured and paid seperately under appropriate item) complete all as specified and directed. |
| 57 | Supply and fixing (in repair ) mechanical joint made out of MS sheet fabricated as per existing site requirement including long MS nuts bolts rubber gasket cutting of pipe of any size GI/CI/MS/AC/DI pipe complete all as specified and directed. of following sizes:-(a) 200 mm bore |
| 58 | (b) 100 mm bore |
| 59 | (c) 80 mm bore Please Enable Macros to View BoQ information |
| 60 | (c) 80 mm bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 26, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayAug 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender