Tender For Repair & Maintenance Of Street Light/Security Light, Garden Lights,Post Top Lantern And Other Related Works In Zone A At Def Lab Jodhpur
Tender Value
8 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
4 days left
EMD
16000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of Street Light/Security Light, Garden Lights,Post Top Lantern And Other Related Works In Zone A At Def Lab Jodhpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Aug-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Repair to street light any type by removing /taking down unserveciable street lights and refixing the same after reparing of existing street lights including replacing with damaged street light glass, burned wire line/cable fault, if any with following items complete all as specified and directed by EIC.:-(a) Electronic Driver suitable for upto 120 Watt LED light fittings(b) LED PCB suitable for upto 120 Watt LED light fittings Note : (i)Taking down ,Fixing of Items mentioned at Srl item No. 1(a),1 (b) & 1(c) above & refixing of street light be included in unit rate quoted by bidders & Items mentioned at Srl item No. 1(a),1 (b) & 1(c) above measured and paid äs supply only\\" shall be seperately under respective item of BOQ. (d) New cable as required for connecting in existing circuit will be included in unit rate quoted by the bidder & not any claim will be entertained at later stage on this account. |
| 2 | Repair to high mast flood light fitting any type by removing /taking down unserveciable high mast flood light fittings and refixing the same after reparing of existing high mast flood light fitting including replacing with damaged light glass, burned wire line/cable fault, if any with following items complete all as specified and directed by EIC.:-(a) Electronic Driver suitable for upto 250 Watt LED light fittings(b) Flood light PCB & LED PCB suitable for upto 250 Watt LED light fittings(c) Surge Protector not less than 5 KV rating suitable for upto 250 Watt LED light fittings. Note : (i)Taking down ,Fixing of Items mentioned at Srl item No. 2(a),2 (b) & 2(c) above & refixing of street light be included in unit rate quoted by bidders & Items mentioned at Srl item No. 2(a),2 (b) & 2(c) above measured and paid äs supply only\\" shall be seperately under respective item of BOQ. (d) New cable as required for connecting in existing circuit will be included in unit rate quoted by the bidder & not any claim will be entertained at later stage on this account. |
| 3 | Labour only for making unserviceable street/security lights serviceable placed at pole by disconnection / Isolating power supply either from pole junction box or by disconnecting overhead jumpers and carrying out de-carbonization / de-sulphation at connection points with overhead conductor / light fitting / junction box terminal including replacement connection wire all as required and as directed by Engr-in-Charge. Note : - New cable as required for connecting in existing circuit will be included in unit rate quoted by the bidder & not any claim will be entertained at later stage on this account. |
| 4 | Supply only Electronic Driver Input Voltage Range 160V to 260V AC Single Phase 50 Hz and Output Voltage not exceeding 60V DC suitable upto 35/36 Watt LED type fitting complete all as per existing. |
| 5 | Supply only Electronic Driver Input Voltage Range 160V to 260V AC Single Phase 50 Hz and Output Voltage not exceeding 60V DC suitable upto 45 Watt LED type fitting complete all as per existing. |
| 6 | Supply only Electronic Driver Input Voltage Range 160V to 260V AC Single Phase 50 Hz and Output Voltage not exceeding 60V DC suitable upto 90 Watt LED type fitting complete all as per existing. |
| 7 | Supply only Electronic Driver Input Voltage Range 160V to 260V AC Single Phase 50 Hz and Output Voltage not exceeding 60V DC suitable upto 120 Watt LED type fitting complete all as per existing. |
| 8 | Supply only Street light PCB of 35 watts LED type fitting complete all as per specified and directed by EIC. Note: The LED PCB material is also required to fix inside casing of LED fitting |
| 9 | Supply only Street light PCB of 45 watts LED type fitting complete all as per specified and directed by EIC. Note: The LED PCB material is also required to fix inside casing of LED fitting |
| 10 | Supply only Street light PCB of 90 watts LED type fitting complete all as per specified and directed by EIC. Note: The LED PCB material is also required to fix inside casing of LED fitting |
| 11 | Supply only Street light PCB of 120 watts LED type fitting complete all as per specified and directed by EIC. Note: The LED PCB material is also required to fix inside casing of LED fitting |
| 12 | Supply only Flood light PCB of 250 watts LED type fitting complete all as per specified and directed by EIC.Note: The LED PCB material is also required to fix inside casing of LED fitting. |
| 13 | Supply only Surge protector not less then 5KV suitable for upto 250 Watt LED type light fittings complete all as per direction by Engr-in-Charge. |
| 14 | Supply and fixing in replacement post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp including suitable size of wire of any length for all necessary connections including taking down old UNSV light complete all as specified and as directed by Engineer-in-charge. |
| 15 | Supply and fixing LED flood light 200 watt 230 V AC outdoor type, made up of pressure die cast aluminium housing with toughended glass, high power LED and secondary lenses with IP66 protection, NB/MB/WB, 10 KV SPD, system efficacy not less than 120/135 LPW including suitable size of wire of any length for all necessary connections, taking down old UNSV light including necessary foundation with plaster any size if required complete all as specified and as directed by Engineer-in-charge. |
| 16 | Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type made up of pressure die cast aluminium housing with toughended glass, high power LED and secondary lenses with IP66 protection, 10 KV SPD, system efficacy not less than 110/120 LPW including suitable size of wire of any length for all necessary connections including taking down old UNSV light complete all as specified and as directed by Engineer-in-charge. |
| 17 | Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type made up of pressure die cast aluminium housing with toughended glass, high power LED and secondary lenses with IP66 protection, 10 KV SPD, system efficacy not less than 110/120 LPW including suitable size of wire of any length for all necessary connections including taking down old UNSV light complete all as specified and as directed by Engineer-in-charge. |
| 18 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type made up of pressure die cast aluminium housing with toughended glass, high power LED and secondary lenses with IP66 protection, 10 KV SPD, system efficacy not less than 110/120 LPW including suitable size of wire of any length for all necessary connections including taking down old UNSV light complete all as specified and as directed by Engineer-in-charge. |
| 19 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type made up of pressure die cast aluminium housing with toughended glass, high power LED and secondary lenses with IP66 protection, 10 KV SPD, system efficacy not less than 110/120 LPW including suitable size of wire of any length for all necessary connections including taking down old UNSV light complete all as specified and as directed by Engineer-in-charge. |
| 20 | Supply and fix in replacement of pathway/gate/garden lights any type suitable for 10 to 20 watt light of height 2 ft fitting as per existing complete all as specified and directed. Please Enable Macros to View BoQ information |
| 21 | Supply and fix in replacement of pathway/gate/garden lights any type suitable for 10 to 20 watt light of height 2 ft fitting as per existing complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender