Tender For Repair/Maint Of All Types Of Fans, Geysers And Misc E/M Appliances Incl With Connected Work/ Items Incl With Connected Work/ Items In Otm & Md Accn (Officer/Jcos/Ors) In The Area Of 19 Bihar, Kirby Place, Map Kirby Place, Stn Road, Moude R
Tender Value
40 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
4 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of All Types Of Fans, Geysers And Misc E/M Appliances Incl With Connected Work/ Items Incl With Connected Work/ Items In Otm & Md Accn (Officer/Jcos/Ors) In The Area Of 19 Bihar, Kirby Place, Map Kirby Place, Stn Road, Moude Road, Airport Road, Office Complex, Cod, Me Line, 505 Abw, 226 Asc, Esd, Fol Depot, Atc, Map Narayana, Map (Fafa) Accn Kabul Line, Poultry Farm And All Offrs Messes Under Ge (N) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down ceiling fan of any sweep by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser, flexible wire, down rod, canopies. (Note : Rubber bush, bearing, capacitor, copper flexible wire, down rods, canopies as supply only rates and fixing charges for spare parts shall deemed to be included) |
| 2 | Rewinding of burnt out winding of stator of the ceiling fan 1200 mm sweep with existing gauge/size and turns of super enamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings and reassembling the same complete testing all as specified and as directed. |
| 3 | All as per the description of srl item No 02 above but for 1400 mm Sweep |
| 4 | Painting of ceiling fan of any sweep complete with one coat of 1st grade quality synthetic enamel paint by spraying including preparation of old painted surfaces by removing any type of sticky dust, oil marks etc and filling cavities with fillers and writing letters and numbers complete all as specified and as directed. |
| 5 | Taking down Exhaust/Ventilation fan of any sweep by unscrewing nut/bolts from its position (high rise bldgs up to 8 storey height) and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser,flexible connection wire,louvers,shutters, all as specified and directed. (Note : Rubber Bush, Gun Metal Bush, bearing, capacitor, twin core twisted copper flexible wire, Louvers,shutters, winding and paintng are measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included) |
| 6 | Rewinding of burnt out winding of the Exhaust fan up to 300/350 mm dia with existing gauge/size and turns of super enamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings and reassembling the same complete testing all as specified and as directed. |
| 7 | All as per the description of srl item No 06 but 380/450mm Sweep |
| 8 | All as per the description of srl item No 06 but 600 mm Sweep |
| 9 | All as per the description of srl item No 06 but ventilation fan up to 200/250 mm Sweep. |
| 10 | Painting of exhaust fan of any sweep complete with one coat of 1st grade quality synthetic enamel paint by spraying including preparation of old painted surfaces to remove any type of sticky dust, oil marks etc and filling cavities with fillers and writing letters and numbers complete |
| 11 | Taking down pedestal/wall mounted fan of any sweep by unscrewing nut/bolts from its position and fixing the same to its original place after necessary cleaning, oiling, greasing, replacement of defective parts bush, bearing, condenser,flexible connection wire and re-winding all as specified and directed. (Note : Bush, bearing,capacitor, twin core twisted copper flexible wire and winding are measured and paid separately as supply only rates and fixing charges for spare parts shall deemed to be included) |
| 12 | Rewinding of burnt winding from the stater of the pedestal/wall mounted fan any sweep with matching gauge and turns of superenamelled copper wire leathenic paper, glass sleeves etc including varnishing,heating the windings as per manufacturer design and reassembling the same complete testing all as specified and as directed. |
| 13 | Supply only for ball bearing number of 6201 to 6204 as required for fan complete (Make : SKF/NBC) |
| 14 | Supply only rubber bush for shackle with bolt, nut and lock pin suitable for ceiling fan |
| 15 | Supply only twin twisted copper flexible wire of size 1.0 sqmm |
| 16 | Supply only capacitor 0.8/1 Mfd, 240 Volts.(Make/Model- as per sample) |
| 17 | Supply only capacitor 2.5 Mfd, 240 Volts.(Make- Tibcon/Havells/Epico) |
| 18 | All as per the description of srl item No 17 but 3.15 Mfd. |
| 19 | All as per the description of srl item No 17 but 4.0 Mfd. |
| 20 | Supply only PVC canopy for ceiling fan |
| 21 | Supply only down rod for ceiling fan of 1' long, colour match with existing fan complete all as directed |
| 22 | All as per the description of srl item No 21 but 2' long |
| 23 | All as per the description of srl item No 21 but 5' long |
| 24 | S&F in replacement Fan Hook made out of MS Flat Iron of size 50x6mm of required shape at site incl nut, bolt and washer for fixing of C/fan complete all as directed |
| 25 | M&L in repair for GI tubing 40 mm bore (medium grade) for fixing of ceiling fans and make good the disturbed wall surface and all as specified and directed. |
| 26 | M&L for ceiling fan blade suitable for 1200mm sweep complete |
| 27 | All as per the description of srl item No 26 but for 1400mm sweep |
| 28 | S&F in replacement louvers with shutter metallic body suitable for exhaust fan upto 450mm sweep with necessary fixing accessories after taking down existing all as specified and directed. (Note : Louver Shutter are to be replaced up to high rise bldg/8 storey including all necessary T&P and fixing arrangement by the contractor) |
| 29 | S&F in replacement louver with shutter plastic body suitable for ventilation fan upto 250 mm sweep with necessary fixing accessories after taking down existing all as specified and directed. (Note : Louver Shutter are to be replaced up to high rise bldg/8 storey including all necessary T&P and fixing arrangement by the contractor) |
| 30 | M&L for exhaust fan blade (metal body) suitable for 300/380/450/600 mm sweep for exhaust fan complete all as directed (Make as per sample) |
| 31 | M&L in replacement ventilation fan blade (PVC type) suitable for 200/250mm sweep complete (Make as per sample) |
| 32 | All as per the description of srl item No 31 but for 300mm sweep |
| 33 | Supply only for ventilation fan motors suitable for 200/250 mm sweep complete |
| 34 | M&L in repair for electronic fan regulator flush type, 5 stepped type complete all as directed |
| 35 | S&F in replacement , Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete . and taking down old/unsv fan and deposit in E/M store yard complete all as specified and directed |
| 36 | Supply and fixing in repair of 300 mm sweep, 900 RPM, exhaust fan, heavy duty with louver shutter, frame, blades complete all as directed & UNSV fan depositing in E/M store yard. (Make: Khaitan/Crompton Greaves/Havells) |
| 37 | All as per the description of srl item No 36 but 380mm sweep |
| 38 | All as per the description of srl item No 36 but 450mm sweep |
| 39 | Supply and fixing in repair of 400mm sweep, wall mounting fan, oscalating type complete and UNSV fan deposit in E/M store yard complete all as directed (Make: Khaitan/Crompton Greaves/Havells) |
| 40 | Supply and fixing in repair of 200/225/250mm dia, 900 RPM, fresh air fan woth plastic louvers incl frame complete and UNSV fan depositing in E/M store yard all as directed (Make: Bajaj/Crompton Greaves/Havells) |
| 41 | Taking down carefully electric geyser of any type and capacity by disconnecting electric and water supply connection, opening nut, bolt, washer and replacing the defective parts and reassembling after cleaning and replacing defective parts and re-installing the same in original position and making necessary electric and water supply connection and testing complete all as specified and directed. (Note: Spare items shall be measured and paid seperately as supply only under relevant items) |
| 42 | Supply only geyser inner water tank 35/50Ltrs capacity steel body as per sample ,duly tested complete all as specified and directed. |
| 43 | All as per the description of srl item No 42 but 25 Ltrs capacity |
| 44 | Supply only of Heating element capacity 1.5 KW (Round/Triangular) ISI marked suitable for geyser (as per sample) complete all as specified and directed.Make : as per sample |
| 45 | All as per the description of srl item No 44 but capacity 2 KW. |
| 46 | Supply only thermostat suitable for 50/35/25 ltrs capacity geysers (Make :- as per sample) |
| 47 | Supply only Heavy duty hot water connection, SS rope threaded type with brass unions at both ends, 45cm long 15mm bore complete. |
| 48 | Supply only cold water connection, PVC connection with brass unions at both ends, 45cm long 15mm bore complete. |
| 49 | Supply only replacement of safety valve/Pressure release valve for geysers of any capacity/ type |
| 50 | Supply only indicator lamp Red/Green suitable for geyser of any type/capacity (Make as per sample) |
| 51 | Supply only geyser base plate assembly of any capacity any model all as specified and directed complete (Make as per sample) |
| 52 | Supply only geyser top and bottom cover any capacity any model all as specified and directed complete (Make as per sample) |
| 53 | S&F in replacement of glass wool heat resistance type of exist type (8 kgs) for 25 to 50 ltrs capacity geysers complete |
| 54 | S&F in replacement of outer cover MS sheet/ABS body of geysers 25 to 50 Ltrs capacity complete |
| 55 | M&L soldering/brazing inner geyser tanks 50/25 liters with brass solder and refixing after testing the leakage complete incl replacement of rubber packaging ring heat resistance type all as specified directed complete. |
| 56 | Material & Labour for spray painting 25 to 50 Ltrs capacity Geyser with two coats of white synthetic enamel paint (1st quality approved brand ) after preparation of surface all as specified and directed complete. |
| 57 | M&L in replacement of Plug top, 3 pin, 05 amps, 230 volt |
| 58 | M&L in replacement of Plug top, 3 pin, 15 amps, 230 volt |
| 59 | S&F in repair PVC insulated and sheathed flexible cable 3 core Multi-stranded copper conductor size 2.5 Sqmm 1100 volt grade after taking out old unserviceable one including electric connection complete all as specified and directed. (Make : FINOLEX/POLYCAB/PLAZA) |
| 60 | Supply and fixing in repair of desert/Air cooler of body size 25\\"x25\\"x32\\", made out of corrosion resistant, 18 SWG GI sheet duly powder coated paint with 500mm sweep copper wound fan motor kit 180 watt with metallic blade, ISI marked, 1400 RPM, 230 volt AC, tank capacity not less than 100 ltr, incl plastic submersible pumps, electronis fan regulator with P/switch, desert cooler to be fitted with 6mm thick plywood to cover the gap as required size at existing window and old unsv desert cooler depositing in E/M Store yard complete all as directed (Make : JK Classic/Decool/Supreme/Kapsun) |
| 61 | S&F in replacement fan motor kit incl blade, steel body for desert cooler of flow capacity upto 4000 Cum/Hr complete all as directed (Make :- Khaitan/CG/Bajaj) |
| 62 | M&L fan blade (PVC type) suitable for desert cooler up to 450mm sweep fan complete all as directed (Make as per sample) |
| 63 | S&F in repair plastic submersible pump suitable for desert cooler any size complete all as directed (Make : Khaitan/CG/Bajaj |
| 64 | Supply and fixing 6mm thick plywood sheet (ISI marked) waterproof fixed in window including cutting as desired size for passing air of desert cooler. |
| 65 | S&F desert cooler pad (set of three) made out of wood wool etc suitable for desert cooler of any size. |
| 66 | S&F in replacement desert coolers body of required size made out of 18 SWG MS sheet complete including inside panel made out of 22 SWG MS sheet complete and grill duly painted with two coat synthetic enameled paint over one coat of red oxide inside complete all as directed. |
| 67 | S&F in repair PVC flexible pipe of high density for 15 mm bore for desert cooler of any size complete |
| 68 | M&L for servicing of any type and any make of split type AC/Window AC of 2 ton/1.5 ton capacity complete by dismantaling of AC and re-fixing after cleaning and replacement defective parts, dismantling the cover of condensing unit carefully and carry out servicing cleaning of the external surface (both side) throughly with the help of descaling chemical, brush, plain water and dry properly by using air blower for cleaning air dust deposited on epqt and charging of gas in adequate quantity as required re-fixing after repair complete |
| 69 | Supply and charging of refrigerant gas R-134a/R-22 for any type and capacity of Window/Split AC and checking for leakage (if any) after charging of gas complete |
| 70 | S&F in replacement Motor double shaft 1/5 HP capacity for window type AC 1.5 ton/2 ton capacity complete (Make : As per sample) |
| 71 | S&F in replacement Motor single shaft 1/5 HP capacity for split type AC 1.5/2.0 ton capacity complete (Make : As per sample) |
| 72 | S&F in repair thermostat for split AC/Window AC of capacity 1.5/2 Ton complete (Make : As per sample) |
| 73 | S&F of filter for split AC of 1.5/2 TR cap including taking out the old u/s filter complete |
| 74 | S&F of Reverse valve (heating and cooling type) suitable for split AC of capacity 1.5 TR by taking out of old u/s valve from the outdoor unit of AC and fixing of new valve by breazing/soldering and charging of adequate quantity of gas and testing on completion complete all as directed |
| 75 | All as per the description of srl item No 74 but for split AC of 2.0 TR capacity |
| 76 | S&F in replacement hermetically sealed rotary type compressor unit of capacity 1.5 TR and charging of adequate quantity of refrigerant gas and testing on completion complete (Make : Bule Star/Carrier/Kirloskar/Emarsion/Teckmesh) |
| 77 | S&F in repair Power Circuit Board (PCB) suitable for split type AC of capacity 1.5TR / 2.0 TR complete |
| 78 | S&F in repair switch piano flush type, 6 amps, 230V AC,single pole, one way |
| 79 | S&F in repair switch piano flush type 16 amps, 230V AC single pole one way |
| 80 | S&F in repair socket out let multipurpose suitable for 2 pin and 3 pin 6 amp flush type |
| 81 | S&F in repair socket out let multipurpose type, for 3 pin 6 and 16 amp flush type. |
| 82 | S&F in repair MCB SP, 10-32 amps, 240 volts, 'C' series, 10 KA breaking capacity complete |
| 83 | S&F in repair MCB SPN 63 amp, 240 volts, 'C' series, 10 KA breaking capacity & connection complete |
| 84 | S&F in replacement pressed sheet metal enclosure (MCB DB) 2 way, single phase and neutral , single door type, 240 volts, DB to be grouted on wall including disturbed surface to match existing surface complete all as specified & directed |
| 85 | M&L in replacement for two single core (submain) PVC insulated cable with 4 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia concealed in wall including all conduit and fixing accessories complete |
| 86 | S & F in repair sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB with 20 Amps complete |
| 87 | S & F in repair industrial type two pin and earth plug top complete |
| 88 | M&L in repair PVC casing caping of size 20 x 12mm, ISI marked, incl accessories, screw etc complete all as directed |
| 89 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipes etc.including grouting of bolts for fixing complete and taking down old/unsv geser and deposit in E/M store yard all as directed at site by Engr-in-charge. |
| 90 | Supply and fix air circulator fan, steel body AC single Phase. 230V oscilating suitable for wall mounting of size 450 mm sweep complete and taking down old exhaust fan and depositing to MES store yard, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed |
| 91 | Taking down exhaust fan any make carefully,supply and fixing exhaust fan steel body AC single phase 230 Volts of size 600 mm sweep with blade and frameand louvers complete all as specified and as directed. |
| 92 | S&F in repair of BLDC Ceiling fan Power Circuit Board (PCB) suitable for Input Voltage: 110V – 300V AC, Power Rating: Suitable for 28W – 35W BLDC motors, Control Type: RF Remote/Regulator, PCB Type: Double-layer high-grade FR4, Operating Temperature: -10°C to 60°C complete |
| 93 | M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete. (Note: On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.) |
| 94 | S&F in repair MCCB, 63 Amps, 03 pole, AC, 415 Volts of 16 KA breaking capacity complete |
| 95 | S&F in repair MCCB, 100 Amps, 03 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed. |
| 96 | S&F in repair MCCB, 125 Amps, 03 pole, AC, 415 Volts of 16 KA breaking capacity complete. |
| 97 | S&F in repair MCCB, 160 Amps, 04 pole, AC, 415 Volts of 36 KA breaking capacity complete |
| 98 | S&F in repair MCCB, 200 Amps, 04 pole, AC, 415 Volts of 36 KA breaking capacity complete |
| 99 | S&F in repair MCCB, 250 Amps, 04 pole, AC, 415 Volts of 36 KA breaking capacity complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender