Tender For Repair To Plumbing, Flooring ,Wall Panelling, Internal /External Periodical Services And Other Misc B/R Works In Otm Accn Of Cod Under Age B/R-1 Of Ge North Delhi Cantt-10
Tender Value
48 Lakhs
Estimated cost
Bid Submission
19 Aug 2026
19 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Plumbing, Flooring ,Wall Panelling, Internal /External Periodical Services And Other Misc B/R Works In Otm Accn Of Cod Under Age B/R-1 Of Ge North Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4) incl Dismantling of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles up to 15 mtr height complete all as specified. |
| 2 | Brickwork with subclass `B' bricks, straight or curved on Plan to any radius in half brick thick walls, built in CM(1:4) incl Dismantling of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles up to 15 mtr height complete all as specified. |
| 3 | M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (internal surfaces) finished even and smooth including takingdown existing cement plaster from wall complete all as specified and dircted. |
| 4 | M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (external surfaces) finished even and smooth including taking down cement plaster from wall complete all as specified and dircted. |
| 5 | M&L 5mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on ceilling surfaces finished even and smooth including taking down cement plaster from ceilling complete all as specified and dircted. |
| 6 | M&L rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth without using extra cement in CM 1:4 finished even and smooth complete all as specified and as directed by engr-in-charge. |
| 7 | M&L 15 mm thick Rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished even and smooth without using extra cement all as specified and directed by Engineer-in-Charge. |
| 8 | Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition) of any description and in any position not otherwise specially provided. |
| 9 | M&L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in chajjas including formwork complete (reinforcement to be measured separately). |
| 10 | M&L Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like including formwork to sides and soffits complete (reinforcement to be measured separately) |
| 11 | Mild steel TMT bars 6 to 8 mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete. |
| 12 | M&L for preparing plastered or unplastered new surfaces of ceilling and applying two coats of oil bound distemper complete all as specified and directed. |
| 13 | M&L for applying two coats of Oil Bound Distemper on old plastered/unplastered surface of Ceiling using Airless spray technology withmax working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paintusage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower Note:- Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc. by skilled labour) Step 1- Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 14 | M&L for applying two coats of Oil Bound Distemper on new plastered/unplastered surface of wall using Airless spray technology withmax working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paintusage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower .Note:- Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over M&L waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc. by skilled labour step 1) Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface complete all as specifiec and as directed. |
| 15 | M&L for applying two coats of Oil Bound Distemper on old plastered/unplastered surface of wall using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paintusage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower Note:- Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc. by skilled labour) step 1- Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 16 | M&L for two coats of cement base paint on old plastered/unplastered surface of wall using auto-roller and airless paint sprayer over one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of asian Paints Trucare graco or equivalent having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent quotes incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 17 | M&L for preparation of new plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm using auto-roller and airless paint sprayer complete all as specified and as directed. |
| 18 | M&L for preparation of old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm using auto-roller and airless paint sprayer incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed. |
| 19 | M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. |
| 20 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified and directed. |
| 21 | Taking down chowkhats or frames exc 1.50 sqm but n.exc 4.00sqm with shutters (without taking off shutters from the frames) all as specified and directed. |
| 22 | Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed |
| 23 | S&F 40mm thick flush shutter (Factory made) soild core construction, with black board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 24 | S&F fibre glassreinforced plastic (FRP) door frame, three legged of cross section 90 x 45mm having single rebated of 32 x 15mm to receive shutter of 30mm thickness.The laminate shall be moulded with ffire resistant grade un-saturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall befiled with suitable wooden block in all over frame. The frame shall be covered with fibre glass from all sides including MS stay shall be provided at the bottom to steady the frame complete all as specified and directed. |
| 25 | S&F factory made solid FRP door shutter, 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire retavdant grade unsaturated polyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminated for panels and confirming to IS-14856-2000, including fixig to frames complete all as specified. |
| 26 | S&F powder coated aluminium frame partition with frame of standard anodised aluminum section, of size 101.60 mm x 44.45mm x 2mm,in vertical and horizonal members and glazed with5mm thick tinted prelaminated partical board interior grade both side laminated including joining cleats, glazing pins, rubber packing including dismantling of old partition complete all as specified and directed. |
| 27 | Providing and fixing factory made uPVC white colour Sliding window area below or exceeding 2.0 Sqm Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note:- The unit rate quoted by contractor includes cost of glass and all other connected accessories. Net Opening will be measured lor payment purpose. |
| 28 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. Note:- The unit rate quoted by contractor includes cost of glass and all other connected accessories. Net opening will be measured for Payment Purpose. |
| 29 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 30 | S&F 3mm thick ordinary sheet glass and glazing with oil putty complete sie of each pane not exc 0.50 Sqm each pane all as specified and as directed. |
| 31 | S&F 4-5 mm thick sheet glass pan ordinary quality and glazing with rubber beading and aluminium glazing clip/patti area n.exc 1.00 Sqm each pan. |
| 32 | S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete. |
| 33 | S&F in repair 100 mm size butt hinges, extruded aluminum alloy with galvanised mild steel ISI marked. |
| 34 | S&F mild steel pressed steel handle, oval type, stove enamelled black 150 mm long complete all as specified. |
| 35 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete |
| 36 | S&F in repairs table top wash basin white, flat bottom size 525mm x 415mm x 140mm of make Jaguar or equivalent excluding tap, chain, plug but including brackets, waste fitting 32mm dia brass chromium plated push type coupling with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 37 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking down steel tubing and connections complete. |
| 38 | Refixing only old 15 mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required including taking up or down steel tubing and connections complete. . |
| 39 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking down steel tubing and connections complete. |
| 40 | Refixing only old 20 mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required including taking up or down steel tubing and connections complete. |
| 41 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, ISI marked, double alyered hoisted and fixed in position including connecting up pipes including dismantling of PVC water tanks complete all as specified. |
| 42 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, ISI marked, double alyered hoisted and fixed in position including connecting up pipes including dismantling of PVC water tanks complete all as specified. |
| 43 | S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210gms), complete. |
| 44 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete. |
| 45 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 75mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete. |
| 46 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110 mm bore including demolition/taking down PVC/CI drain/Rain water pipe complete. |
| 47 | S&F PVC (SWR) bends any radius, 75 mm bore, complete. |
| 48 | S&F PVC (SWR) bends any radius, 110 mm bore, complete. |
| 49 | S&F in repairs for gypsum ceiling board for ceiling prepainted, perforated finish, 600mm x 600mm x 9mm to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32mm x 24mm for main, 25mm x 24mm for cross tee and 20mm x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. Suspension wires spaced at 1200mm on main runners including making niches for fans/light at and including dismantling of old ceiling board as specified and directed. |
| 50 | Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified. |
| 51 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets. |
| 52 | S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. |
| 53 | S&F 100mm long, extruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified. |
| 54 | S&F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised,Widthof flaps 40mm(when open). |
| 55 | S&F in repairs bib tap 15mm bore fancy type chromium plated complete all as specified and directed,Make-Cera |
| 56 | S&F with complete installation of wind operated turbo air ventilator of size 600mm dia made of stain less steel sheet including dual ball bearing fixed over assembly made of polycarbonate transparant sheet of size 5.5 x 3.5 feet on roof of Prepainted Galvalume Sheet/CGI sheet Covering over wooden/MS structure as specified and directed by Engr-in-Charge. |
| 57 | Dismantling of Stone slabs and tiles of any description or thickness in floors/wall, aprons etc., laid bedded and pointed in any mortar complete all as speicified. |
| 58 | M&L for 75mm thick type-D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base to receive stone slab and pavement all as specified and directed. |
| 59 | M&L 20 to 25 mm thick machine cut Kota stone slab mirror polishing/diamond polishing by machnical means and using carborandum stone of 0 unit to achive mirror finished surface as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slab complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above). |
| 60 | M&L 20 to 25 mm thick machine cut Kota stone slab polishing/diamond polishing by machnical means and using carborandum stone of 0 unit to achive mirror finished surface as in riser or vertical surface over and including 10 mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above). |
| 61 | M&L granite 20mm thick colour as approved (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms or making oval shape hole for fixing of wash hand basin and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar 1:6 including moulding and polishing the edges complete all as specified and directed |
| 62 | M&L granite 20mm thick colour as approved (of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 12mm thick in cement mortar 1:3 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including moulding and polishing the edges etc complete all as specified and directed. |
| 63 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 64 | M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified. |
| 65 | M&L Vitrified ceramic tiles 10 mm thick square/rectangular dark shade)granite or marble texture polished, area of each tiles not exceeding 0.36 sqm,in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile complete all as specified and directed. Make :Somany ,Kajaria ,Orient |
| 66 | All as per the description of srl item No 65 but in vertical surface as skirting, dado and risers to steps over and including10 mm thick rendering/backing coat in cement mortar 1:4 etc. |
| 67 | M&L for vitrified coloured tiles shade as approved 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 1.0 sqm, in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over screed bed or bedding layers of mortars 15 mm thick in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. all as specified and directed. |
| 68 | All as per the description of srl item No 67 above but as in vertical surfaces such as skirting/ dado over and including 10 mm thick rendering in CM (1:4) compelete. |
| 69 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. all as specified and directed |
| 70 | M&L Glazed ceramic coloured tiles in vertical surface 450x350x7 or 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, complete all as specified & directed. |
| 71 | S&F 10mm thick Plain or frosted toughned glass for door shutters,making partitions etc. area n.exc 3.00 Sqm including necessary arrangements required for fixing it in position complete as specified and directed. |
| 72 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided. |
| 73 | M&L for 100mm thick type C-2 1:3:6 (using 40mm graded stone aggregate) as in sub base to receive paver blocks all as specified and directed. |
| 74 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand including dismantling old paver block complete. |
| 75 | M&L for Chequered cement concrete tiles 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments over 15mm thick screed bed in cement mortar 1:6 all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender