Tender For Special Repair / Maintenance Of Railway Siding And Railway Platform At Nad Trombay Under Ge (Nw) Mankhurd.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Aug 2026
15 days left
EMD
49560
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair / Maintenance Of Railway Siding And Railway Platform At Nad Trombay Under Ge (Nw) Mankhurd.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone/ boulder masonry, built in CM incl all quoins, arches, pillars, etc, complete all as specified and directed. |
| 2 | M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as directed. |
| 3 | M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick Work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | Taking down cement plaster on brick or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 5 | M&L for 15mm thick (10+5) in two layers of Polymer modified ready mixedcement based plaster on fair faces of brickwork or concrete surfaces finished the surfaces even & smooth including Make Easy plast from wall plast chemplast, Ready Plast from ultra tech complete all as specified. |
| 6 | M&L for 10mm thick Polymer modified ready mixedcement based plaster on fair faces of brickwork or concrete surfaces finished the surfaces even & smooth including Make Easy plast from wall plast chemplast, Ready Plast from ultra tech complete all as specified. |
| 7 | M&L for 5-8mm thick Polymer modified ready mixedcement based plaster as in ceiling / facia / chajja etc. finished even and smooth without using extra cement, Make Easy plast from wall plast chemplast, Ready Plast from ultratech complete all as specified. |
| 8 | M & L 20mm thick rendering in cement mortar (1:4) on stone masonry or surfaces other than fair face of brick work or on one side of lathing of walls, finished even & smooth surfaces without using extra cement complete all as specified. |
| 9 | Chipping, removing carefully loose/damaged concrete including plastering (total thickness upto 60mm) from surfaces of RCC members, in any location by low impact Hammer/Breaker without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris outside MOD land complete all as specified and directed.Note: 1) Hard concrete shall not be removed by force |
| 10 | M&L for cleaning existing reinforcement with wire/rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make \\"Feovert\\" of \\"Krishna Conchem\\" OR \\"Roff Rust Cleaner of \\"Pidilite\\" OR \\"Shali Rustoff of \\"STP Ltd\\" on rebars with time interval of 1 hour between the coats, complete all as specified and directed.[Note: - Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.] |
| 11 | M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed.Note: - Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured. |
| 12 | M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed. |
| 13 | M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Monith-PMM) OR Polymer mortar HB of Dr. Fixit, upto 20mm thickness including levelling, profiling etc complete all as specified and directed. |
| 14 | M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Monith-PMM) OR Polymer mortar HB of Dr Fixit while the bonding agent is still tacking, exceeding 20mm thickness and not exceeding 40mm thickness in two layers, each layer not exceeding 20mm, including levelling, profiling etc, complete all as specified and directed. |
| 15 | M&L Providing and laying Super fluid Microconcrete of minimum(M-40grade)-Roffecrete repairs or equivalent as specified in the ListofBrandnames) in beam bottoms, columns, slabs etc. including mixing with 5mmto10mm size aggregates,waterproof plywood/ steel plate shuttering, pouring, tamping, Consolidating, curing etc complete as per Manufacturer’sspecificationandConsultantsinstructions.Theitemshallbepaidonactual consumptionofMicroconcrete. Rateof this itemshall includechippingofconcrete, surfacepreparation, rust removal andprevention treatment as per specs and in accordancewithconsultants suggestions anddirectionsThe itemshall bepaidon actual consumption of Micro concrete. |
| 16 | Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 17 | M&L preparing new surfaces of walls applying two coat of oil bound distemper over 3mm thick wall care putty over a coat of primer complete all as specified & directed by EIC. |
| 18 | M&L for preparation of surfaces of ceiling applying two coat of oil bond distemper complete all as specified and directed |
| 19 | M&L for preparation of new/old plastered surfaces of wall, applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces as in camouflage pattern complete all as specified and directed. |
| 20 | M&L for 18-20 mm thick machine cut, prepolished cuddappa stone slab as in platform for fixing oval shape wash hand basin (including cutting the slab to oval shape to accomodate the sink and WHB), window sill, etc pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of stone slab etc, also including moulding/rounding to edges of the slab, including dismantling of existing tile slab complete as specified and directed. |
| 21 | M&L for 75mm thick PCC 1:2:4 type B-1 (using 20mm agg. ) as in plinth protection / path/ any paved area finishing cement concrete surface even and smooth complete all as specified and directed. |
| 22 | Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) n exce 1.5 Sqm each including complete all as specified and directed. |
| 23 | Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) exceeding 1.5 Sqm but not exc 4 Sqm each including complete all as specified and directed. |
| 24 | S&F second class hard wood , plain ,solid ,straight chowkats and frames, wrought , rebated on solid rounded or chamfered , put together with gule pinned at joints etc complete all as specified and directed |
| 25 | S&F factory made 2nd class HW 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated |
| 26 | S&F extruded aluminum alloy handles (150mm ) fabricated type anodised complete all as specified Make :- Shalimar / Jyoti/ Classic/ Ashoka |
| 27 | S&F hinges (125 mm) stainless steel medium weight complete all as specified |
| 28 | S&F in repairs aluminum anodised barrel tower bolts (150 mm ) of extruded section complete all as specified |
| 29 | S&F in repairs 250 mm Aluminium alloy , anodised , sliding door bolt with hasp, staple (bolt type ) and fixing clips of sheet, cast , extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified |
| 30 | S&F floor door stopper aluminum body over length of cover plate 140 mm and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 31 | M&L for preparation of newly or previously untreated surfaces of wood or wood based surfaces of any description not other wise described , over 10cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 32 | M&L for preparation of newly or previously untreated surfaces of wood or wood based surfaces of any description not other wise described , over 10cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender